User Feedback :: various problem with DSL 3.0

i did. the same stuff happened. but when I tried 3.0.1 on my desktop the problem did not occur.

so something was changed between 2.4 and 3.0 and 3.0.1 which not related to unionfs which created the problem on my laptop. Any idea as to what that might be?

VS

PS: here is below the output of hwinfo on my laptop (I apologize for the length)

============ start debug info ============
libhd version 8.38 (ia32)
kernel version is 2.6
----- /proc/cmdline -----
ACPI on - DMA on - English vga=0x317 screen=1024x768 splash ramdisk_size=100000 init=/etc/init lang=us apm=power-off nomce quiet 2
----- /proc/cmdline end -----
debug = 0xff7ffff7
probe = 0x138fe4be17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum +manual +fb +veth +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs +s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -max -lxrc +dsl)
shm: attached segment 32768 at 0xb7de3000
>> floppy.1: get nvram
>> floppy.2: klog info
>> bios.1: cmdline
>> bios.1.1: apm
>> bios.2: ram
bios: 1 disks
bios: EBDA 0x00c00 bytes at 0x9f400
>> bios.2: rom
>> bios.3: smp
----- BIOS data 0x00400 - 0x004ff -----
400 f8 03 00 00 00 00 00 00 78 03 00 00 00 00 40 9f "........x.....@."
410 27 42 00 7d 02 28 00 00 00 00 24 00 24 00 e0 50 "'B.}.(....$.$..P"
420 32 03 0d 1c 00 00 00 00 00 00 00 00 00 00 00 00 "2..............."
430 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 "................"
440 16 00 03 42 00 00 00 a0 ef 76 80 00 00 a0 00 00 "...B.....v......"
450 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
460 00 00 00 d4 03 29 30 7f 03 00 c0 00 cf e0 0a 00 ".....)0........."
470 00 00 00 00 01 01 00 00 14 14 14 00 01 01 01 01 "................"
480 1e 00 3e 00 2f 10 00 60 f9 11 0b 81 50 00 00 04 "..>./..`....P..."
490 04 00 00 00 00 00 10 10 00 00 00 00 00 00 00 00 "................"
4a0 00 00 00 00 00 00 00 00 23 17 00 c0 00 00 00 00 "........#......."
4b0 00 00 00 00 00 00 d0 19 00 00 00 00 00 00 00 00 "................"
4c0 00 04 00 01 00 08 70 01 76 03 a0 00 0f 00 00 00 "......p.v......."
4d0 70 01 00 00 10 e7 84 00 c8 00 00 00 00 00 00 00 "p..............."
4e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
4f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
----- BIOS data end -----
----- EBDA 0x9f400 - 0x9ffff -----
===>>>I REMOVED THIS DATA TO SHORTEN THE POST<<<===
----- EBDA end -----
>> bios.4: vbe
>> bios.4.1: vbe info
>> bios.5: 32
bios32: valid SD header at 0xf71f0 (size 0x10, rev 0), SD at 0xfd890
>> sys.1: cpu
vmware check: 0
>> misc.9: kernel log
----- kernel log -----
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>PIIX4: IDE controller at PCI slot 0000:00:07.1
<6>PIIX4: chipset revision 1
<6>PIIX4: not 100% native mode: will probe irqs later
<6> ide0: BM-DMA at 0x1090-0x1097, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0x1098-0x109f, BIOS settings: hdc:DMA, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: TOSHIBA MK1214GAP, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<4>hdc: TOSHIBA DVD-ROM SD-C2302, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: max request size: 128KiB
<6>hda: 23579136 sectors (12072 MB), CHS=23392/16/63, UDMA(33)
<6>hda: cache flushes not supported
<6> hda: hda1 hda2 < hda5 hda6 >
<6>hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<4>3ware Storage Controller device driver for Linux v1.26.02.001.
<4>3ware 9000 Storage Controller device driver for Linux v2.26.02.004.
<7>libata version 1.12 loaded.
<6>mice: PS/2 mouse device common for all mice
<6>md: linear personality registered as nr 1
<6>md: raid0 personality registered as nr 2
<6>md: raid1 personality registered as nr 3
<6>md: raid10 personality registered as nr 9
<6>md: raid5 personality registered as nr 4
<6>raid5: automatically using best checksumming function: pIII_sse
<4> pIII_sse : 888.000 MB/sec
<4>raid5: using function: pIII_sse (888.000 MB/sec)
<4>raid6: int32x1 137 MB/s
<4>raid6: int32x2 144 MB/s
<4>raid6: int32x4 120 MB/s
<4>raid6: int32x8 111 MB/s
<4>raid6: mmxx1 363 MB/s
<4>raid6: mmxx2 495 MB/s
<4>raid6: sse1x1 349 MB/s
<4>raid6: sse1x2 486 MB/s
<4>raid6: using algorithm sse1x2 (486 MB/s)
<6>md: raid6 personality registered as nr 8
<6>md: multipath personality registered as nr 7
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.39
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
<6>device-mapper: dm-multipath version 1.0.4 loaded
<6>device-mapper: dm-round-robin version 1.0.0 loaded
<6>device-mapper: dm-emc version 0.0.3 loaded
<6>EISA: Probing bus 0 at eisa.0
<4>Cannot allocate resource for EISA slot 1
<4>Cannot allocate resource for EISA slot 2
<4>Cannot allocate resource for EISA slot 3
<6>EISA: Detected 0 cards.
<6>NET: Registered protocol family 2
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<4>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices:
<4> LID COM1 MDM1 PWRB
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<6>NTFS driver 2.1.25 [Flags: R/W MODULE].
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<7>ISO 9660 Extensions: RRIP_1991A
<6>Freeing unused kernel memory: 272k freed
<6>Synaptics Touchpad, model: 1, fw: 4.3, id: 0x8858a1, caps: 0x0/0x0
<6>input: SynPS/2 Synaptics TouchPad on isa0060/serio1
<6>input: PC Speaker
<6>Linux agpgart interface v0.101 © Dave Jones
<6>agpgart: Detected an Intel 440BX Chipset.
<6>agpgart: AGP aperture is 64M @ 0xe0000000
<6>parport: PnPBIOS parport detected.
<6>parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<3>shpchp: shpc_init : shpc_cap_offset == 0
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
<6>Yenta: CardBus bridge found at 0000:00:04.0 [14c0:0007]
<6>Yenta: Enabling burst memory read transactions
<6>Yenta: Using CSCINT to route CSC interrupts to PCI
<6>Yenta: Routing CardBus interrupts to PCI
<6>Yenta TI: socket 0000:00:04.0, mfunc 0x01021c72, devctl 0x66
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
<6>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>Yenta: ISA IRQ mask 0x0438, PCI irq 11
<6>Socket status: 30000006
<6>ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
<6>Yenta: CardBus bridge found at 0000:00:04.1 [14c0:0007]
<6>Yenta: Using CSCINT to route CSC interrupts to PCI
<6>Yenta: Routing CardBus interrupts to PCI
<6>Yenta TI: socket 0000:00:04.1, mfunc 0x01021c72, devctl 0x66
<6>Yenta: ISA IRQ mask 0x0438, PCI irq 11
<6>Socket status: 30000006
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>USB Universal Host Controller Interface driver v2.3
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
<4>PCI: setting IRQ 5 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
<6>uhci_hcd 0000:00:07.2: UHCI Host Controller
<6>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:07.2: irq 5, io base 0x00001060
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
<6>usb 1-1: new full speed USB device using uhci_hcd and address 2
<4>ltmodem: module license 'Proprietary' taints kernel.
<6>Loading Lucent Modem Controller driver version 8.26-alk-8
<6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
<6>Detected Parameters Irq=5 BaseAddress=0x1800 ComAddress=0x1080
<6>ttyLTM0 at I/O 0x1800 (irq = 5) is a Lucent/Agere Modem
<6>Initializing USB Mass Storage driver...
<6>scsi0 : SCSI emulation for USB Mass Storage devices
<6>usbcore: registered new driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
<6>es1968: clocking to 48000
<6>Capability LSM initialized
<5> Vendor: Pretec Model: 512MB Gini Rev: 1.10
<5> Type: Direct-Access ANSI SCSI revision: 02
<5>SCSI device sda: 975744 512-byte hdwr sectors (500 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 00 00 00
<3>sda: assuming drive cache: write through
<5>SCSI device sda: 975744 512-byte hdwr sectors (500 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 00 00 00
<3>sda: assuming drive cache: write through
<6> sda:
<5>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
<5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
<7>usb-storage: device scan complete
<6>ACPI: AC Adapter [AC] (off-line)
<6>ACPI: Battery Slot [BAT0] (battery present)
<6>ACPI: Battery Slot [BAT1] (battery absent)
<6>ACPI: Lid Switch [LID]
<6>ACPI: Power Button (CM) [PWRB]
<6>ACPI: Sleep Button (CM) [SBTN]
<6>ACPI: Fan [FAN] (off)
<4>Using specific hotkey driver
<6>ACPI: CPU0 (power states: C1[C1] C2[C2])
<6>ACPI: Processor [CPU0] (supports 8 throttling states)
<6>ACPI: Thermal Zone [THRM] (33 C)
<6>pcmcia: Detected deprecated PCMCIA ioctl usage.
<6>pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
<6>pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
<6>cs: IO port probe 0x100-0x4ff: clean.
<6>cs: IO port probe 0x100-0x4ff: clean.
<6>cs: IO port probe 0xc00-0xcff: clean.
<6>cs: IO port probe 0xc00-0xcff: clean.
<6>cs: IO port probe 0x3000-0x7fff: clean.
<6>cs: IO port probe 0x3000-0x7fff: clean.
<6>cs: IO port probe 0xa00-0xaff: clean.
<6>cs: IO port probe 0xa00-0xaff: clean.
<4>fuse init (API version 7.2)
<6>Adding 408200k swap on /dev/hda5. Priority:-1 extents:1 across:408200k
----- kernel log end -----
>> misc.1: misc data
>> misc.1.1: open serial
>> misc.1.2: open parallel
----- exec: "/sbin/rmmod parport_pc" -----
----- return code: ? -----
----- exec: "/sbin/rmmod parport" -----
----- return code: ? -----
----- exec: "/sbin/modprobe parport " -----
----- return code: ? -----
----- exec: "/sbin/modprobe parport_pc io=0x378 irq=none,none,none" -----
----- return code: ? -----
>> misc.1.3: read floppy
read_block0: open(/dev/fd0) failed
>> misc.2.1: io
>> misc.2.2: dma
>> misc.2.3: irq
----- /proc/ioports -----
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f2-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial
04d0-04d1 : pnp 00:05
0cf8-0cff : PCI conf1
1000-103f : 0000:00:07.3
1000-1003 : PM1a_EVT_BLK
1004-1005 : PM1a_CNT_BLK
1008-100b : PM_TMR
100c-100f : GPE0_BLK
1010-1015 : ACPI CPU throttle
1016-103f : motherboard
1016-103f : pnp 00:05
1040-105f : 0000:00:07.3
1040-104f : motherboard
1040-104f : pnp 00:05
1040-1047 : piix4-smbus
1060-107f : 0000:00:07.2
1060-107f : uhci_hcd
1080-1087 : 0000:00:10.0
1090-109f : 0000:00:07.1
1090-1097 : ide0
1098-109f : ide1
1400-14ff : 0000:00:08.0
1400-14ff : ESS Maestro
1800-18ff : 0000:00:10.0
1c00-1cff : PCI CardBus #02
2000-2fff : PCI Bus #01
2000-20ff : 0000:01:00.0
3000-30ff : PCI CardBus #02
3400-34ff : PCI CardBus #06
3810-381f : motherboard
3810-381f : pnp 00:05
3c00-3cff : PCI CardBus #06
----- /proc/ioports end -----
----- /proc/interrupts -----
0: 32159 XT-PIC timer
1: 290 XT-PIC i8042
2: 0 XT-PIC cascade
4: 8 XT-PIC serial
5: 633 XT-PIC uhci_hcd:usb1, ltserial, ESS Maestro
6: 8 XT-PIC floppy
8: 1 XT-PIC rtc
9: 42 XT-PIC acpi
11: 2 XT-PIC yenta, yenta
12: 110 XT-PIC i8042
14: 73 XT-PIC ide0
15: 774 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
----- /proc/interrupts end -----
----- /proc/dma -----
2: floppy
4: cascade
----- /proc/dma end -----
>> misc.3: FPU
>> misc.3.1: DMA
>> misc.3.2: PIC
>> misc.3.3: timer
>> misc.3.4: RTC
>> cpu.1: cpuinfo
----- /proc/cpuinfo -----
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 1
cpu MHz : 448.092
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 897.11

----- /proc/cpuinfo end -----
>> memory.1: main memory size
kcore mem: 0xbff0000
klog mem 0: 0x0
klog mem 1: 0x0
klog mem: 0x0
bios mem: 0x0
meminfo: 0x0
>> pci.1: sysfs drivers
----- sysfs driver list (id 0xf3d132a9db0da4c0) -----
ide-cdrom: /devices/pci0000:00/0000:00:07.1/ide1/1.0
ide-disk: /devices/pci0000:00/0000:00:07.1/ide0/0.0
ES1968 (ESS Maestro): /devices/pci0000:00/0000:00:08.0
ES1968 (ESS Maestro): /module/snd_es1968
PIIX_IDE: /devices/pci0000:00/0000:00:07.1
agpgart-intel: /devices/pci0000:00/0000:00:00.0
piix4_smbus: /devices/pci0000:00/0000:00:07.3
uhci_hcd: /devices/pci0000:00/0000:00:07.2
yenta_cardbus: /devices/pci0000:00/0000:00:04.0
yenta_cardbus: /devices/pci0000:00/0000:00:04.1
i8042: /devices/platform/i8042
serial8250: /devices/platform/serial8250
vesafb: /devices/platform/vesafb.0
i8042 aux: /devices/pnp0/00:0b
i8042 kbd: /devices/pnp0/00:0a
serial: /devices/pnp0/00:04
system: /devices/pnp0/00:00
system: /devices/pnp0/00:05
sd: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0
atkbd: /devices/platform/i8042/serio1
psmouse: /devices/platform/i8042/serio0
hub: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
hub: /module/usbcore
usb-storage: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0
usb-storage: /module/usb_storage
usb: /devices/pci0000:00/0000:00:07.2/usb1/1-1
usb: /devices/pci0000:00/0000:00:07.2/usb1
usb: /module/usbcore
usbfs: /module/usbcore
----- sysfs driver list end -----
>> pci.2: get sysfs pci data
pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
path = /devices/pci0000:00/0000:00:00.0
class = 0x60000
vendor = 0x8086
device = 0x7190
subvendor = 0x0
subdevice = 0x0
irq = 0
res[0] = 0xe0000000 0xe3ffffff 0x1208
config[64]
pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
path = /devices/pci0000:00/0000:00:01.0
class = 0x60400
vendor = 0x8086
device = 0x7191
subvendor = 0x0
subdevice = 0x0
irq = 0
config[64]
pci device: name = 0000:00:04.0, bus_id = 0000:00:04.0, bus = pci
path = /devices/pci0000:00/0000:00:04.0
class = 0x60700
vendor = 0x104c
device = 0xac1c
subvendor = 0x14c0
subdevice = 0x7
irq = 11
res[0] = 0x18100000 0x18100fff 0x200
config[64]
pci device: name = 0000:00:04.1, bus_id = 0000:00:04.1, bus = pci
path = /devices/pci0000:00/0000:00:04.1
class = 0x60700
vendor = 0x104c
device = 0xac1c
subvendor = 0x14c0
subdevice = 0x7
irq = 11
res[0] = 0x18101000 0x18101fff 0x200
config[64]
pci device: name = 0000:00:07.0, bus_id = 0000:00:07.0, bus = pci
path = /devices/pci0000:00/0000:00:07.0
class = 0x68000
vendor = 0x8086
device = 0x7110
subvendor = 0x0
subdevice = 0x0
irq = 0
config[64]
pci device: name = 0000:00:07.1, bus_id = 0000:00:07.1, bus = pci
path = /devices/pci0000:00/0000:00:07.1
class = 0x10180
vendor = 0x8086
device = 0x7111
subvendor = 0x0
subdevice = 0x0
irq = 0
res[4] = 0x1090 0x109f 0x101
config[64]
pci device: name = 0000:00:07.2, bus_id = 0000:00:07.2, bus = pci
path = /devices/pci0000:00/0000:00:07.2
class = 0xc0300
vendor = 0x8086
device = 0x7112
subvendor = 0x0
subdevice = 0x0
irq = 5
res[4] = 0x1060 0x107f 0x101
config[64]
pci device: name = 0000:00:07.3, bus_id = 0000:00:07.3, bus = pci
path = /devices/pci0000:00/0000:00:07.3
class = 0x68000
vendor = 0x8086
device = 0x7113
subvendor = 0x0
subdevice = 0x0
irq = 9
config[64]
pci device: name = 0000:00:08.0, bus_id = 0000:00:08.0, bus = pci
path = /devices/pci0000:00/0000:00:08.0
class = 0x40100
vendor = 0x125d
device = 0x1978
subvendor = 0x14c0
subdevice = 0x7
irq = 5
res[0] = 0x1400 0x14ff 0x101
config[64]
pci device: name = 0000:00:10.0, bus_id = 0000:00:10.0, bus = pci
path = /devices/pci0000:00/0000:00:10.0
class = 0x78000
vendor = 0x11c1
device = 0x449
subvendor = 0x1468
subdevice = 0x440
irq = 5
res[0] = 0xfc000000 0xfc0000ff 0x200
res[1] = 0x1080 0x1087 0x101
res[2] = 0x1800 0x18ff 0x101
config[64]
pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci
path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0
class = 0x30000
vendor = 0x1002
device = 0x4c4d
subvendor = 0x14c0
subdevice = 0x7
irq = 11
res[0] = 0xfd000000 0xfdffffff 0x200
res[1] = 0x2000 0x20ff 0x101
res[2] = 0xfc100000 0xfc100fff 0x200
res[6] = 0x18000000 0x1801ffff 0x7202
config[64]
---------- PCI raw data ----------
bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:7190:0000:0000:03
class 06, sub_class 00 prog_if 00, hdr 0, flags <agp>, irq 0
addr0 e0000000, size 04000000
00: 86 80 90 71 06 01 10 22 03 00 00 06 00 40 00 00 "...q...".....@.."
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 "................"
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 "................"
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
a0: 02 00 ".."

bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 8086:7191:0000:0000:03
class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
00: 86 80 91 71 1f 00 20 02 03 00 04 06 00 80 01 00 "...q.. ........."
10: 00 00 00 00 00 00 00 00 00 01 01 40 20 20 a0 22 "...........@ .""
20: 10 fc f0 fd 00 18 00 18 00 00 00 00 00 00 00 00 "................"
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00 "................"

bus 00->02, slot 04, func 0, vend:dev:s_vend:s_dev:rev 104c:ac1c:14c0:0007:01
class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 11
addr0 18100000, size 00001000
00: 4c 10 1c ac 07 00 10 02 01 00 07 06 20 a8 82 00 "L........... ..."
10: 00 00 10 18 a0 00 00 02 00 02 05 b0 00 00 00 10 "................"
20: 00 f0 ff 11 00 00 00 12 00 f0 ff 13 00 1c 00 00 "................"
30: fc 1c 00 00 00 30 00 00 fc 30 00 00 ff 01 c0 05 ".....0...0......"

bus 00->06, slot 04, func 1, vend:dev:s_vend:s_dev:rev 104c:ac1c:14c0:0007:01
class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 11
addr0 18101000, size 00001000
00: 4c 10 1c ac 07 00 10 02 01 00 07 06 20 a8 82 00 "L........... ..."
10: 00 10 10 18 a0 00 00 02 00 06 09 b0 00 00 00 14 "................"
20: 00 f0 ff 15 00 00 00 16 00 f0 ff 17 00 34 00 00 ".............4.."
30: fc 34 00 00 00 3c 00 00 fc 3c 00 00 ff 01 c0 05 ".4...<...<......"

bus 00, slot 07, func 0, vend:dev:s_vend:s_dev:rev 8086:7110:0000:0000:02
class 06, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0
00: 86 80 10 71 0f 00 80 02 02 00 80 06 00 00 80 00 "...q............"
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"

bus 00, slot 07, func 1, vend:dev:s_vend:s_dev:rev 8086:7111:0000:0000:01
class 01, sub_class 01 prog_if 80, hdr 0, flags <>, irq 0
addr4 00001090, size 00000010
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00 "...q.........@.."
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
20: 91 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"

bus 00, slot 07, func 2, vend:dev:s_vend:s_dev:rev 8086:7112:0000:0000:01
class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 5
addr4 00001060, size 00000020
00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 40 00 00 "...q.........@.."
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
20: 61 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "a..............."
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00 "................"

bus 00, slot 07, func 3, vend:dev:s_vend:s_dev:rev 8086:7113:0000:0000:03
class 06, sub_class 80 prog_if 00, hdr 0, flags <>, irq 9
00: 86 80 13 71 03 00 80 02 03 00 80 06 00 00 00 00 "...q............"
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"

bus 00, slot 08, func 0, vend:dev:s_vend:s_dev:rev 125d:1978:14c0:0007:10
class 04, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 5
addr0 00001400, size 00000100
00: 5d 12 78 19 05 00 90 02 10 00 01 04 00 40 00 00 "].x..........@.."
10: 01 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 14 07 00 "................"
30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 01 02 18 "................"
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
c0: 01 00 ".."

bus 00, slot 10, func 0, vend:dev:s_vend:s_dev:rev 11c1:0449:1468:0440:01
class 07, sub_class 80 prog_if 00, hdr 0, flags <pm>, irq 5
addr0 fc000000, size 00000100
addr1 00001080, size 00000008
addr2 00001800, size 00000100
00: c1 11 49 04 03 00 90 02 01 00 80 07 00 00 00 00 "..I............."
10: 00 00 00 fc 81 10 00 00 01 18 00 00 00 00 00 00 "................"
20: 00 00 00 00 00 00 00 00 40 00 00 00 68 14 40 04 "........@...h.@."
30: 00 00 00 00 f8 00 00 00 00 00 00 00 05 01 fc 0e "................"
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
f0: 00 00 00 00 00 00 00 00 01 00 ".........."

bus 01, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1002:4c4d:14c0:0007:64
class 03, sub_class 00 prog_if 00, hdr 0, flags <pm,agp>, irq 11
addr0 fd000000, size 01000000
addr1 00002000, size 00000100
addr2 fc100000, size 00001000
00: 02 10 4d 4c 87 00 90 02 64 00 00 03 08 42 00 00 "..ML....d....B.."
10: 00 00 00 fd 01 20 00 00 00 00 10 fc 00 00 00 00 "..... .........."
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 14 07 00 "................"
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 08 00 "....P..........."
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
50: 02 5c 00 00 00 00 00 00 00 00 00 00 01 00 ".\............"
---------- PCI raw data end ----------
>> pci.4: build list
>> monitor.1: ddc
>> isapnp.1: pnp devices
pnp device: name = 00:00, bus_id = 00:00, bus = pnp
path = /devices/pnp0/00:00
id = PNP 0c01
pnp device: name = 00:01, bus_id = 00:01, bus = pnp
path = /devices/pnp0/00:01
id = PNP 0a05
pnp device: name = 00:02, bus_id = 00:02, bus = pnp
path = /devices/pnp0/00:02
id = PNP 0700
pnp device: name = 00:03, bus_id = 00:03, bus = pnp
path = /devices/pnp0/00:03
id = PNP 0401
pnp device: name = 00:04, bus_id = 00:04, bus = pnp
path = /devices/pnp0/00:04
id = PNP 0501
pnp device: name = 00:05, bus_id = 00:05, bus = pnp
path = /devices/pnp0/00:05
id = PNP 0c02
pnp device: name = 00:06, bus_id = 00:06, bus = pnp
path = /devices/pnp0/00:06
id = PNP 0200
pnp device: name = 00:07, bus_id = 00:07, bus = pnp
path = /devices/pnp0/00:07
id = PNP 0b00
pnp device: name = 00:08, bus_id = 00:08, bus = pnp
path = /devices/pnp0/00:08
id = PNP 0c04
pnp device: name = 00:09, bus_id = 00:09, bus = pnp
path = /devices/pnp0/00:09
id = PNP 0800
pnp device: name = 00:0a, bus_id = 00:0a, bus = pnp
path = /devices/pnp0/00:0a
id = PNP 0303
pnp device: name = 00:0b, bus_id = 00:0b, bus = pnp
path = /devices/pnp0/00:0b
id = PNP 0f13
>> isa.1: isdn
---------- ISA ISDN raw data ----------
---------- ISA ISDN raw data end ----------
>> isa.1.1: isdn
----- cardctl status -----
Socket 0:
no card
Socket 1:
no card
----- cardctl status end -----
----- cardctl ident -----
Socket 0:
no product info available
Socket 1:
no product info available
----- cardctl ident end -----
>> serial.1: read info
----- /proc/tty/driver/serial -----
0: uart:16550A port:000003F8 irq:4 tx:8 rx:0
1: uart:unknown port:000002F8 irq:3
2: uart:unknown port:000003E8 irq:4
3: uart:unknown port:000002E8 irq:3
----- /proc/tty/driver/serial end -----
----- serial info -----
uart 16550A, line 0, port 0x3f8, irq 4, baud 0
----- serial info end -----
>> serial.2: build list
>> misc.5: misc data
----- misc resources -----
i/o:1 0x0000 - 0x001f (0x20) "dma1"
i/o:1 0x0020 - 0x0021 (0x02) "pic1"
i/o:0 0x0040 - 0x0043 (0x04) "timer0"
i/o:0 0x0050 - 0x0053 (0x04) "timer1"
i/o:1 0x0060 - 0x006f (0x10) "keyboard"
i/o:1 0x0070 - 0x0077 (0x08) "rtc"
i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
i/o:1 0x00c0 - 0x00df (0x20) "dma2"
i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
i/o:1 0x0170 - 0x0177 (0x08) "ide1"
i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
i/o:1 0x0376 - 0x0376 (0x01) "ide1"
i/o:1 0x0378 - 0x037a (0x03) "parport0"
i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
i/o:1 0x03f2 - 0x03f5 (0x04) "floppy"
i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
i/o:1 0x03f7 - 0x03f7 (0x01) "floppy DIR"
i/o:1 0x03f8 - 0x03ff (0x08) "serial"
i/o:0 0x04d0 - 0x04d1 (0x02) "pnp 00:05"
i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
i/o:0 0x1000 - 0x103f (0x40) "0000:00:07.3"
i/o:0 0x1000 - 0x1003 (0x04) "PM1a_EVT_BLK"
i/o:0 0x1004 - 0x1005 (0x02) "PM1a_CNT_BLK"
i/o:0 0x1008 - 0x100b (0x04) "PM_TMR"
i/o:0 0x100c - 0x100f (0x04) "GPE0_BLK"
i/o:0 0x1010 - 0x1015 (0x06) "ACPI CPU throttle"
i/o:0 0x1016 - 0x103f (0x2a) "motherboard"
i/o:0 0x1016 - 0x103f (0x2a) "pnp 00:05"
i/o:0 0x1040 - 0x105f (0x20) "0000:00:07.3"
i/o:0 0x1040 - 0x104f (0x10) "motherboard"
i/o:0 0x1040 - 0x104f (0x10) "pnp 00:05"
i/o:0 0x1040 - 0x1047 (0x08) "piix4-smbus"
i/o:0 0x1060 - 0x107f (0x20) "0000:00:07.2"
i/o:0 0x1060 - 0x107f (0x20) "uhci_hcd"
i/o:0 0x1080 - 0x1087 (0x08) "0000:00:10.0"
i/o:0 0x1090 - 0x109f (0x10) "0000:00:07.1"
i/o:1 0x1090 - 0x1097 (0x08) "ide0"
i/o:1 0x1098 - 0x109f (0x08) "ide1"
i/o:0 0x1400 - 0x14ff (0x100) "0000:00:08.0"
i/o:0 0x1400 - 0x14ff (0x100) "ESS Maestro"
i/o:0 0x1800 - 0x18ff (0x100) "0000:00:10.0"
i/o:0 0x1c00 - 0x1cff (0x100) "PCI CardBus #02"
i/o:0 0x2000 - 0x2fff (0x1000) "PCI Bus #01"
i/o:0 0x2000 - 0x20ff (0x100) "0000:01:00.0"
i/o:0 0x3000 - 0x30ff (0x100) "PCI CardBus #02"
i/o:0 0x3400 - 0x34ff (0x100) "PCI CardBus #06"
i/o:0 0x3810 - 0x381f (0x10) "motherboard"
i/o:0 0x3810 - 0x381f (0x10) "pnp 00:05"
i/o:0 0x3c00 - 0x3cff (0x100) "PCI CardBus #06"
irq:1 0 ( 32159) "timer"
irq:0 1 ( 290) "i8042"
irq:1 2 ( 0) "cascade"
irq:1 4 ( 8) "serial"
irq:0 5 ( 633) "uhci_hcd:usb1" "ltserial" "ESS Maestro"
irq:1 6 ( 8) "floppy"
irq:1 8 ( 1) "rtc"
irq:0 9 ( 42) "acpi"
irq:0 11 ( 2) "yenta" "yenta"
irq:0 12 ( 110) "i8042"
irq:1 14 ( 73) "ide0"
irq:1 15 ( 774) "ide1"
dma:1 2 "floppy"
dma:1 4 "cascade"
----- misc resources end -----
>> parallel.1: pp mod
----- exec: "/sbin/rmmod parport_pc" -----
----- return code: ? -----
----- exec: "/sbin/modprobe parport_pc" -----
----- return code: ? -----
>> parallel.2.1: lp read info
>> parallel.2.2: lp read info
>> parallel.2.3: lp read info
----- parallel info -----
/proc/sys/dev/parport/parport0/base-addr
888 1912
/proc/sys/dev/parport/parport0/autoprobe
----- parallel info end -----
>> parallel.5: ppa mod
----- exec: "/sbin/modprobe ppa " -----
----- return code: ? -----
>> parallel.6: zip read info
----- exec: "/sbin/rmmod ppa" -----
----- return code: ? -----
----- parallel info -----
----- parallel info end -----
>> block.1: block modules
----- exec: "/sbin/modprobe ide_cd " -----
FATAL: Module ide_cd not found.
----- return code: ? -----
----- exec: "/sbin/modprobe sr_mod " -----
FATAL: Module sr_mod not found.
----- return code: ? -----
----- exec: "/sbin/modprobe sd_mod " -----
FATAL: Module sd_mod not found.
----- return code: ? -----
----- exec: "/sbin/modprobe st " -----
----- return code: ? -----
>> block.2: sysfs drivers
----- sysfs driver list (id 0x61de9bdb159efc8e) -----
ide-cdrom: /devices/pci0000:00/0000:00:07.1/ide1/1.0
ide-disk: /devices/pci0000:00/0000:00:07.1/ide0/0.0
ES1968 (ESS Maestro): /devices/pci0000:00/0000:00:08.0
ES1968 (ESS Maestro): /module/snd_es1968
PIIX_IDE: /devices/pci0000:00/0000:00:07.1
agpgart-intel: /devices/pci0000:00/0000:00:00.0
piix4_smbus: /devices/pci0000:00/0000:00:07.3
uhci_hcd: /devices/pci0000:00/0000:00:07.2
yenta_cardbus: /devices/pci0000:00/0000:00:04.0
yenta_cardbus: /devices/pci0000:00/0000:00:04.1
i8042: /devices/platform/i8042
serial8250: /devices/platform/serial8250
vesafb: /devices/platform/vesafb.0
i8042 aux: /devices/pnp0/00:0b
i8042 kbd: /devices/pnp0/00:0a
parport_pc: /devices/pnp0/00:03
serial: /devices/pnp0/00:04
system: /devices/pnp0/00:00
system: /devices/pnp0/00:05
sd: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0
atkbd: /devices/platform/i8042/serio1
psmouse: /devices/platform/i8042/serio0
hub: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
hub: /module/usbcore
usb-storage: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0
usb-storage: /module/usb_storage
usb: /devices/pci0000:00/0000:00:07.2/usb1/1-1
usb: /devices/pci0000:00/0000:00:07.2/usb1
usb: /module/usbcore
usbfs: /module/usbcore
----- sysfs driver list end -----
>> block.3: cdrom
----- /proc/sys/dev/cdrom/info -----
drive name: hdc
drive speed: 24
drive # of slots: 1
Can close tray: 1
Can open tray: 1
Can lock tray: 1
Can change speed: 1
Can select disk: 0
Can read multisession: 1
Can read MCN: 1
Reports media changed: 1
Can play audio: 1
Can write CD-R: 0
Can write CD-RW: 0
Can read DVD: 1
Can write DVD-R: 0
Can write DVD-RAM: 0
Can read MRW: 1
Can write MRW: 1
Can write RAM: 1
----- /proc/sys/dev/cdrom/info end -----
>> block.4: partition
----- /proc/partitions -----
7 0 559380 loop0
3 0 11789568 hda
3 1 6176488 hda1
3 2 1 hda2
3 5 408208 hda5
3 6 5201248 hda6
8 0 487872 sda
----- /proc/partitions end -----
disks:
hda
sda
partitions:
hda1
hda2
hda5
hda6
>> block.5: get sysfs block dev data
ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:07.1/ide0/0.0
ide: bus_id = 1.0 path = /devices/pci0000:00/0000:00:07.1/ide1/1.0
block: name = fd0, path = /block/fd0
dev = 2:0
range = 1
block device: bus = platform, bus_id = floppy.0 driver = unknown
path = /devices/platform/floppy.0
block: name = hda, path = /block/hda
dev = 3:0
range = 64
block device: bus = ide, bus_id = 0.0 driver = ide-disk
path = /devices/pci0000:00/0000:00:07.1/ide0/0.0
block: name = hdc, path = /block/hdc
dev = 22:0
range = 1
block device: bus = ide, bus_id = 1.0 driver = ide-cdrom
path = /devices/pci0000:00/0000:00:07.1/ide1/1.0
hdc: el torito boot catalog at 0x0026
media type: 0
load address: 0x0000
block: name = loop0, path = /block/loop0
dev = 7:0
range = 1
block: name = loop1, path = /block/loop1
dev = 7:1
range = 1
block: name = loop2, path = /block/loop2
dev = 7:2
range = 1
block: name = loop3, path = /block/loop3
dev = 7:3
range = 1
block: name = loop4, path = /block/loop4
dev = 7:4
range = 1
block: name = loop5, path = /block/loop5
dev = 7:5
range = 1
block: name = loop6, path = /block/loop6
dev = 7:6
range = 1
block: name = loop7, path = /block/loop7
dev = 7:7
range = 1
block: name = md0, path = /block/md0
dev = 9:0
range = 1
block: name = ram0, path = /block/ram0
dev = 1:0
range = 1
block: name = ram10, path = /block/ram10
dev = 1:10
range = 1
block: name = ram11, path = /block/ram11
dev = 1:11
range = 1
block: name = ram12, path = /block/ram12
dev = 1:12
range = 1
block: name = ram13, path = /block/ram13
dev = 1:13
range = 1
block: name = ram14, path = /block/ram14
dev = 1:14
range = 1
block: name = ram15, path = /block/ram15
dev = 1:15
range = 1
block: name = ram1, path = /block/ram1
dev = 1:1
range = 1
block: name = ram2, path = /block/ram2
dev = 1:2
range = 1
block: name = ram3, path = /block/ram3
dev = 1:3
range = 1
block: name = ram4, path = /block/ram4
dev = 1:4
range = 1
block: name = ram5, path = /block/ram5
dev = 1:5
range = 1
block: name = ram6, path = /block/ram6
dev = 1:6
range = 1
block: name = ram7, path = /block/ram7
dev = 1:7
range = 1
block: name = ram8, path = /block/ram8
dev = 1:8
range = 1
block: name = ram9, path = /block/ram9
dev = 1:9
range = 1
block: name = sda, path = /block/sda
dev = 8:0
range = 16
block device: bus = scsi, bus_id = 0:0:0:0 driver = sd
path = /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0
vendor = Pretec
model = 512MB Gini
rev = 1.10
type = 0
>> block.5: /dev/sda
>> block.5.1: /dev/sda geo
dev = /dev/sda, fd = 3
open ok, fd = 3
/dev/sda: ioctl(geo) ok
/dev/sda: ioctl(block size) ok
/dev/sda: ioctl(disk size) ok
>> block.5.2: /dev/sda serial
>> scsi.1: scsi tape
>> scsi.2: scsi generic
scsi: name = sg0, path = /class/scsi_generic/sg0
dev = 21:0
scsi device: bus = scsi, bus_id = 0:0:0:0 driver = sd
path = /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0
>> usb.1: sysfs drivers
>> usb.2: usb
usb dev: /devices/pci0000:00/0000:00:07.2/usb1/1-1
usb dev: /devices/pci0000:00/0000:00:07.2/usb1
usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
path = /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
bInterfaceNumber = 0
bInterfaceClass = 9
bInterfaceSubClass = 0
bInterfaceProtocol = 0
if: 1-0:1.0 @ /devices/pci0000:00/0000:00:07.2/usb1
bDeviceClass = 9
bDeviceSubClass = 0
bDeviceProtocol = 0
idVendor = 0x0000
idProduct = 0x0000
manufacturer = "Linux 2.6.14-kanotix-9 uhci_hcd"
product = "UHCI Host Controller"
serial = "0000:00:07.2"
bcdDevice = 0206
speed = "12"
usb device: name = 1-1:1.0, bus_id = 1-1:1.0, bus = usb
path = /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0
bInterfaceNumber = 0
bInterfaceClass = 8
bInterfaceSubClass = 6
bInterfaceProtocol = 80
if: 1-1:1.0 @ /devices/pci0000:00/0000:00:07.2/usb1/1-1
bDeviceClass = 0
bDeviceSubClass = 0
bDeviceProtocol = 0
idVendor = 0x4146
idProduct = 0xba01
product = "USB Mass Storage Device"
serial = "07AB0000000611"
bcdDevice = 0100
speed = "12"
usb device: name = 1-1, bus_id = 1-1, bus = usb
path = /devices/pci0000:00/0000:00:07.2/usb1/1-1
usb device: name = usb1, bus_id = usb1, bus = usb
path = /devices/pci0000:00/0000:00:07.2/usb1
>> usb.3.1: joydev mod
----- exec: "/sbin/modprobe joydev " -----
FATAL: Module joydev not found.
----- return code: ? -----
>> usb.3.2: evdev mod
>> usb.3.3: input
input: name = event0, path = /class/input/event0
dev = 13:64
input device: bus = serio, bus_id = serio1 driver = atkbd
path = /devices/platform/i8042/serio1
input: name = event1, path = /class/input/event1
dev = 13:65
input device: bus = serio, bus_id = serio0 driver = psmouse
path = /devices/platform/i8042/serio0
input: name = event2, path = /class/input/event2
dev = 13:66
input: name = mice, path = /class/input/mice
dev = 13:63
input: name = mouse0, path = /class/input/mouse0
dev = 13:32
input device: bus = serio, bus_id = serio0 driver = psmouse
path = /devices/platform/i8042/serio0
>> usb.3.4: lp
>> edd.1: edd mod
----- exec: "/sbin/modprobe edd " -----
FATAL: Module edd not found.
----- return code: ? -----
>> edd.2: edd info
>> braille.1.1: alva
>> braille.2.1: alva open
>> braille.3.1: alva init ok
>> braille.4.1: alva read data
alva.100@/dev/ttyS0[0]:
>> braille.5.1: alva read done
>> braille.1.1: fhp_old
>> braille.2.1: fhp open
>> braille.3.1: fhp init ok
>> braille.4.1: fhp write ok
>> braille.5.1: fhp read done
fhp@/dev/ttyS0[0]:
no fhp display: 0x00
>> braille.1.1: fhp_el
>> braille.2.1: fhp open
>> braille.3.1: fhp init ok
>> braille.4.1: fhp write ok
>> braille.5.1: fhp read done
fhp@/dev/ttyS0[0]:
no fhp display: 0x00
>> braille.1.1: ht
>> braille.2.1: ht open
>> braille.3.1: ht init ok
>> braille.4.1: ht write ok
>> braille.5.1: ht read done
ht@/dev/ttyS0[1]: 00 "."
no ht display: 0x00
>> braille.1.1: baum
>> braille.2.1: baum open
>> braille.3.1: baum write ok
>> braille.4.1: baum read done
baum@/dev/ttyS0[0]:
>> modem.1: serial
****** started child process 2296 (15s/120s) ******
>> modem.2: init
>> modem.3.1: at test
>> modem.3.2: at test
>> modem.3.3: at test
>> modem.3.4: at test
>> modem.4: init string
>> modem.5: speed
>> modem.5: pnp id
----- serial modems -----
/dev/ttyS0
not a modem
----- serial modems end -----
****** stopped child process 2296 (121s) ******
----- serial modems -----
/dev/ttyS0
not a modem
----- serial modems end -----
>> mouse.2: serial
****** started child process 2297 (20s/20s) ******
----- serial mice -----
/dev/ttyS0
----- serial mice end -----
****** stopped child process 2297 (19s) ******
----- serial mice -----
/dev/ttyS0
----- serial mice end -----
>> input.1: joydev mod
----- exec: "/sbin/modprobe joydev " -----
FATAL: Module joydev not found.
----- return code: ? -----
>> input.1.1: evdev mod
>> input.2: input
----- /proc/bus/input/devices -----
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff ffffffff
B: MSC=10
B: LED=7

I: Bus=0011 Vendor=0002 Product=0007 Version=0000
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1
B: EV=b
B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
B: ABS=11000003

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
H: Handlers=kbd event2
B: EV=40001
B: SND=6

----- /proc/bus/input/devices end -----
bus = 17, name = AT Translated Set 2 keyboard
handlers = kbd event0
key = 000000040200000003802078f840d001f2ffffdfffefffffffffffffffffffff
mouse buttons = 0
mouse wheels = 0
bus = 17, name = SynPS/2 Synaptics TouchPad
handlers = mouse0 event1
key = 0000642000000000000700000000000000000000000000000000000000000000000000000000000000000000
mouse buttons = 3
mouse wheels = 0
bus = 16, name = PC Speaker
handlers = kbd event2
mouse buttons = 0
mouse wheels = 0
>> fb.1: read info
>> net.1: get network data
net interface: name = lo, classname = net, path = /class/net/lo
hw_addr = 00:00:00:00:00:00
>> pppoe.1: looking for pppoe
>> isdn.1: list
>> dsl.1: list
>> int.2: cdrom
>> int.3: media
>> int.4.1: /dev/hda
read_block0: 512 bytes (5s, 0us)
>> int.4.2: /dev/sda
read_block0: 512 bytes (5s, 0us)
>> int.4: floppy
>> int.5: bios
bios ctrl 0: 20
bios ctrl 1: 21
bios ctrl 2: 46
>> int.6: mouse
>> int.7: hdb
>> int.8: usbscsi
>> int.9: hotplug
>> int.10: modem
>> int.11: wlan
>> int.12: udev
----- udevinfo -----
/block/hda=/dev/hda
/block/hda/hda1=/dev/hda1
/block/hda/hda2=/dev/hda2
/block/hda/hda5=/dev/hda5
/block/hda/hda6=/dev/hda6
/block/hdc=/dev/hdc
/block/sda=/dev/sda
/class/input/event0=/dev/input/event0
/class/input/event1=/dev/input/event1
/class/input/event2=/dev/input/event2
/class/input/mice=/dev/input/mice
/class/input/mouse0=/dev/input/mouse0
/class/misc/device-mapper=/dev/mapper/control
/class/sound/controlC0=/dev/snd/controlC0
/class/sound/midiC0D0=/dev/snd/midiC0D0
/class/sound/pcmC0D0c=/dev/snd/pcmC0D0c
/class/sound/pcmC0D0p=/dev/snd/pcmC0D0p
/class/sound/timer=/dev/snd/timer
/class/tty/ttyLTM0=/dev/ttyLTM0
/class/usb_device/usbdev1.1=/dev/bus/usb/001/001
/class/usb_device/usbdev1.2=/dev/bus/usb/001/002
----- udevinfo end -----
>> int.13: device names
>> int.14: soft raid
----- soft raid devices -----
----- soft raid devices end -----
----- /proc/modules -----
st 36256 0 - Live 0xcd0c0000
parport_pc 35908 0 - Live 0xcd06e000
parport 30536 1 parport_pc, Live 0xcc838000
cryptoloop 3072 0 - Live 0xcd060000
fuse 30220 0 - Live 0xcd078000
pcmcia 31268 4 - Live 0xcd065000
video 14212 0 - Live 0xcd051000
thermal 10888 0 - Live 0xcd056000
processor 18748 1 thermal, Live 0xccfc2000
fan 3460 0 - Live 0xccfc0000
container 3328 0 - Live 0xccfb5000
button 5008 0 - Live 0xccfb2000
battery 7684 0 - Live 0xccf4d000
ac 3460 0 - Live 0xccf58000
capability 3208 0 - Live 0xcc806000
commoncap 5248 1 capability, Live 0xccf50000
snd_es1968 26368 0 - Live 0xccfb8000
gameport 11400 1 snd_es1968, Live 0xccf08000
snd_ac97_codec 86048 1 snd_es1968, Live 0xccf77000
snd_ac97_bus 1920 1 snd_ac97_codec, Live 0xcced8000
snd_pcm_oss 47264 0 - Live 0xccfa2000
snd_mixer_oss 15488 1 snd_pcm_oss, Live 0xccf53000
snd_pcm 76808 3 snd_es1968,snd_ac97_codec,snd_pcm_oss, Live 0xccf8e000
snd_timer 20740 1 snd_pcm, Live 0xccf70000
snd_page_alloc 8072 2 snd_es1968,snd_pcm, Live 0xccf43000
snd_mpu401_uart 5760 1 snd_es1968, Live 0xccf40000
snd_rawmidi 20128 1 snd_mpu401_uart, Live 0xccf47000
snd_seq_device 6796 1 snd_rawmidi, Live 0xccf0c000
usb_storage 78784 1 - Live 0xccf5b000
snd 45156 9 snd_es1968,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_
rawmidi,snd_seq_device, Live 0xccf18000
ltserial 9904 0 - Live 0xcc873000
ltmodem 555600 1 ltserial, Live 0xccfc8000
soundcore 7392 1 snd, Live 0xccf05000
i2c_piix4 7568 0 - Live 0xcced5000
uhci_hcd 29712 0 - Live 0xccf0f000
usbcore 102912 3 usb_storage,uhci_hcd, Live 0xccf25000
evdev 7296 0 - Live 0xcc85e000
8250_pnp 8320 0 - Live 0xcced1000
8250 17828 1 8250_pnp, Live 0xccee7000
serial_core 17536 2 ltserial,8250, Live 0xccee1000
yenta_socket 22924 4 - Live 0xcceda000
rsrc_nonstatic 10880 1 yenta_socket, Live 0xcc86f000
pcmcia_core 34448 3 pcmcia,yenta_socket,rsrc_nonstatic, Live 0xcceb6000
shpchp 86884 0 - Live 0xcceee000
pci_hotplug 24372 1 shpchp, Live 0xcc878000
intel_agp 19100 1 - Live 0xcc869000
agpgart 27592 1 intel_agp, Live 0xcc861000
pcspkr 3424 0 - Live 0xcc842000
psmouse 33028 0 - Live 0xcc844000
serio_raw 5508 0 - Live 0xcc835000
ntfs 212624 0 - Live 0xcce81000
----- /proc/modules end -----
used irqs: 0,1,2,4,5,6,8,9,11,12,14,15
=========== end debug info ============
01: None 00.0: 0102 Floppy disk controller
[Created at floppy.111]
Unique ID: rdCR.3wRL2_g4d2B
Hardware Class: storage
Model: "Floppy disk controller"
I/O Ports: 0x3f2-0x3f5 (rw)
DMA: 2
IRQ: 6 (8 events)
I/O Port: 0x3f7 (rw)
Config Status: cfg=new, avail=yes, need=no, active=unknown

02: Floppy 00.0: 10603 Floppy Disk
[Created at floppy.119]
Unique ID: sPPV.oZ89vuho4Y3
Parent ID: rdCR.3wRL2_g4d2B
Hardware Class: floppy
Model: "Floppy Disk"
Device File: /dev/fd0
Size: 2880 sectors a 512 bytes
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #1 (Floppy disk controller)

03: None 00.0: 10105 BIOS
[Created at bios.139]
Unique ID: rdCR.lZF+r4EgHp4
Hardware Class: bios
BIOS Keyboard LED Status:
Scroll Lock: off
Num Lock: off
Caps Lock: off
Serial Port 0: 0x3f8
Parallel Port 0: 0x378
PnP BIOS: @@@0000
BIOS32 Service Directory Entry: 0xfd890
Config Status: cfg=new, avail=yes, need=no, active=unknown

04: None 00.0: 10107 System
[Created at sys.50]
Unique ID: rdCR.n_7QNeEnh23
Hardware Class: system
Config Status: cfg=new, avail=yes, need=no, active=unknown

05: None 00.0: 10104 FPU
[Created at misc.190]
Unique ID: rdCR.EMpH5pjcahD
Hardware Class: unknown
Model: "FPU"
I/O Ports: 0xf0-0xff (rw)
Config Status: cfg=new, avail=yes, need=no,

it looks to me like your mixing with another system you have installed. try booting the cd with the cheatcode> dsl nohd(i think that's it, press F2 at start to check)

Quote

============ start debug info ============
libhd version 8.38 (ia32)
kernel version is 2.6

dsl does not have a 2.6 kernel.

oops, I shoud have been more clear...

I used the hwinfo available with Kanotix since my version of DSL did not have this application. I gave it only to list the hardware on my laptop and not as an indication of what is detected with DSL.

That is why the kernel 2.6 shows up.

Sorry about that...

Does

dsl legacy acpi=off

work?

Next Page...
original here.