Other Help Topics :: DSL on IBM thin client?

Hi 8363,

I have a question on the RAM file & my total RAM of 96MB

In the RAM file, the setting is 50000(I assume that is 50MB)

1)
If you run 'rdesktop' on top of fluxbox, does it use the RAM space thats is allocated from the 50MB ??

2)
OR If I have 96MB of RAM & 50MB is allocated by Linux(fluxbox), does RDP use the remaining 46MB ??

3)
If I have 96MB of RAM, should I set the RAM file to 96000 so it is allocated ALL the RAM ??

OR is there a situation where you want 46MB remaining for something else related to RDP or the Linux OS ??

DK

Q: How do I network-share a thin-client printer ??

Hi 8363,

If I attach a USB printer to the USB Port of the N2200,
can you tell me what I would need to Edit & in what Config File to enable the N2200 to use a printer attached to the USB port ??

thanks

DK

Hi all,

I have a 'Xerox DocuPrint P8ex' Laser Printer connected to the Thin Client 'USB Port'

I can NOT seem to Print to this USB Printer either directly from the command prompt OR via RDP connected to Windows Server 2003 & using TCP printing
(works fine if printer connected to a Windows Box)

I have tried:
cat a > /dev/usblp0 - & I got NO error & NO printing
cat a > /dev/usb - & I got NO error & NO printing
cat a > /dev/usb1 - & I got NO error & NO printing
cat a > /dev/usb3 - & I got NO error & NO printing

I also tried: -r printer:usb3="Xerox DocuPrint P8ex"
output: PRINTER PRN1 to usb3 driver Xerox Douc P8ex
& NO Printing

Doing a modprobe printer outputs nothing

I have a directory /dev/usb/ but NO /dev/printer/

Do I need to install a driver or something

I am a Linux noob, so ANY help is greatly appreciated

# dmesg | grep usb
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-uhci.c: $Revision: 1.275 $ time 17:00:43 Mar 1 2005
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
host/usb-ohci.c: USB OHCI at membase 0xc6e10000, IRQ 11
host/usb-ohci.c: usb-00:13.0, Compaq Computer Corporation ZFMicro Chipset USB
usb.c: new USB bus registered, assigned bus number 1
usb.c: registered new driver hid
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for Keyspan PDA
usbserial.c: USB Serial support registered for Keyspan PDA - (prerenumeration)
usbserial.c: USB Serial support registered for Belkin / Peracom / GoHubs USB
Serial Adapter
input0: USB HID v1.00 Keyboard [04b3:3001] on usb1:2.0
input1: USB HID v1.00 Mouse [04b3:3001] on usb1:2.1
usb.c: USB device 3 (vend/prod 0x419/0x3201) is not claimed by any active driver.

there is no printer support on linux-2200

Great work 8363 - everyone owes you a lot!

When I try to boot my N2200 I get "No flash card detected". I'm pretty sure that I have created partitions and file systems correctly - is this a symptom of a simply uncompatible card? It's a cheap no-name brand. Unfortunately I don't have any more on me to give others a try...

Thanks!

trialex

Next Page...
original here.