Other Help Topics :: HD-Install The right way to Fix Static Net Config

If you don't run DHCP and you need a static network configuration the HD install can be frustrating. After every boot you have to reenable your network configuration. This article shows how to fix this problem so that you can configure your network the Un*x way and have the DSL scripts respect that configuration.

The general procedure is to first modify the DSL boot and shutdown scripts to respect the standard Linux network configuration files. Second, add the nodhcp parameter to Lilo boot parameters. Finally, configure your network interfaces and reboot.

Before doing these steps make sure that you are root. Bring up a terminal and enter the following:

Code Sample

sudo su

Step 1 - Modify DSL scripts in /etc/init.d

1. Edit /etc/init.d/knoppix-autoconfig to bring up network interfaces.

Near line 800, find the code that looks like this:
(Search for "nodhcp")

Code Sample

if checkbootparam "nodhcp"; then
echo " ${BLUE}Skipping DHCP broadcast/network detection as requested on boot commandline.${NORMAL}"
...blah, blah, blah...
else

Delete the "...blah, blah, blah..." part and add the following code after the echo... line but before the else line:

Code Sample

echo " ${BLUE}Attempting configured network interfaces.${NORMAL}"
NETDEVICES="$(awk '/auto/{for (i = 1; i <= NF; i++) if ($i ~ /eth[0-9]/) printf("%s ", $i)}' </etc/network/interfaces)"
for n in $NETDEVICES; do
echo " ${MAGENTA}Bringing up $n${NORMAL}"
ifup $n
done

This code parses the ethx interfaces out of the /etc/network/interfaces file
and brings those interfaces up using ifup.
N.B., Do not use ifconfig to bring up interfaces!

2. Edit /etc/init.d/knoppix-halt and /etc/init.d/knoppix-reboot
to shut down the network properly.

In both files:
Replace:

Code Sample

ifconfig $n down

with:

Code Sample

ifdown $n

Step 2 - Add nodhcp to lilo.conf.

Edit the file /etc/lilo.conf

Find the line that reads append="blah blah blah"

Add nodhcp to the statement within the quote marks.
E.G., it should now read:

Code Sample

append="blah blah blah nodhcp"

Save the file.

Run the lilo program. From the command line enter:

Code Sample

lilo

It you made the correct change, it should update the boot record and reinstall
lilo.

Step 3 - Modify /etc/network/interfaces

The DSL script netcardconfig will add the necessary ethx interface to /etc/network/interfaces for you. Either run this script or modify the file manually. If you don't know how to do this Google is your friend. Note that my fix allows you to put in as many ethx interfaces as you need.

That's it! When you reboot your network cards should be brought up just like they're supposed to. Just as important, shutting down, or rebooting should shut them down.

original here.