USB booting :: Layout of drive



Code Sample
/dev/sdc

Disk /dev/sdc: 1014 cylinders, 9 heads, 56 sectors/track
Units = cylinders of 258048 bytes, blocks of 1024 bytes, counting from 0

  Device Boot Start     End   #cyls    #blocks   Id  System
/dev/sdc1   *      0+   1013    1014-    255500    6  FAT16
/dev/sdc2          0       -       0          0    0  Empty
/dev/sdc3          0       -       0          0    0  Empty
/dev/sdc4          0       -       0          0    0  Empty


this is table of my pendrive as it is ... so I need to change geometry to get it to boot

At the moment I get Missing Operating System which does not help much

It will boot under qemu ok ... so I am thinking its not a iso/image problem

TIA
http://www.damnsmalllinux.org/wiki/index.php/Setting_the_Proper_Geometry_on_your_USB_Pendrive
Ta... ;-)

original here.