The Testing Area :: gtk+-2.12.9.uci
Hi Jason,
Yes, K3B works with gtk+-2.12.9 loaded but not set up. So I guess you are on the right track. Hope this helps!
Have fun out there in cyberspace wherever you may be,
meo
OK, now "set up" gtk2 and post the output of
$ ldd /usr/bin/k3b
also may help:
$ ldd /usr/bin/sudo
$ ldd /usr/bin/aterm
$ ldd /usr/bin/rxvt
since you mentioned the root terminal issue. See if /opt/gtk+-2.12.9/lib/* is in any of the results. Of course there is a lot more kde stuff that it may be, but that is a start. One more thing I forgot to ask, do you see the same issue with a stock DSL 3.3?
Hi Jason,
Sorry for the delay but all I get from xshell now is a "twinkling of an eye" so to speak. I have rebooted some times but just the same thing occurs, no xshell, so I can't try your suggestions right now. Furthermore my eyeballs are soon reaching the floor (It's 1.40 AM here in Sweden right now). I'll try tomorrow again with a "vanilla" DSL 3.3 and get back to you.
Have fun and thanks,
meo
Hi meo,
I cannot get k3b to work with DSL 3.3 even without gtk loaded or set up, but I did check the library linkings for /usr/bin/k3b with gtk set up.
Here they are:
libk3bplugin.so.2 => /usr/lib/libk3bplugin.so.2 (0x40020000)
libartskde.so.1 => /usr/lib/libartskde.so.1 (0x4004f000)
libqtmcop.so.1 => /usr/lib/libqtmcop.so.1 (0x400ae000)
libsoundserver_idl.so.1 => /usr/lib/libsoundserver_idl.so.1 (0x400b6000)
libkmedia2_idl.so.1 => /usr/lib/libkmedia2_idl.so.1 (0x40121000)
libartsflow.so.1 => /usr/lib/libartsflow.so.1 (0x40165000)
libasound.so.2 => /usr/lib/libasound.so.2 (0x402ac000)
libaudio.so.2 => /usr/lib/libaudio.so.2 (0x4035b000)
libXt.so.6 => /usr/X11R6/lib/libXt.so.6 (0x40370000)
libesd.so.0 => /usr/lib/libesd.so.0 (0x403bb000)
libaudiofile.so.0 => /usr/lib/libaudiofile.so.0 (0x403c3000)
libjack-0.80.0.so.0 => /usr/lib/libjack-0.80.0.so.0 (0x403e1000)
libvorbisfile.so.3 => /usr/lib/libvorbisfile.so.3 (0x403ed000)
libvorbisenc.so.2 => /usr/lib/libvorbisenc.so.2 (0x403f5000)
libvorbis.so.0 => /usr/lib/libvorbis.so.0 (0x404dd000)
libogg.so.0 => /usr/lib/libogg.so.0 (0x40506000)
libmad.so.0 => /usr/lib/libmad.so.0 (0x4050b000)
libartsflow_idl.so.1 => /usr/lib/libartsflow_idl.so.1 (0x40520000)
libmcop.so.1 => /usr/lib/libmcop.so.1 (0x405da000)
libgmodule-2.0.so.0 => /opt/gtk+-2.12.9/lib/libgmodule-2.0.so.0 (0x40695000)
libgthread-2.0.so.0 => /opt/gtk+-2.12.9/lib/libgthread-2.0.so.0 (0x40699000)
libglib-2.0.so.0 => /opt/gtk+-2.12.9/lib/libglib-2.0.so.0 (0x4069f000)
libkparts.so.2 => /usr/lib/libkparts.so.2 (0x4076a000)
libk3bdevice.so.2 => /usr/lib/libk3bdevice.so.2 (0x407ae000)
libk3bcore.so.2 => /usr/lib/libk3bcore.so.2 (0x407d0000)
libk3btools.so.2 => /usr/lib/libk3btools.so.2 (0x407f4000)
libk3bproject.so.2 => /usr/lib/libk3bproject.so.2 (0x4084b000)
libkio.so.4 => /usr/lib/libkio.so.4 (0x409e4000)
libkdeui.so.4 => /usr/lib/libkdeui.so.4 (0x40d0b000)
libkdesu.so.4 => /usr/lib/libkdesu.so.4 (0x40fca000)
libkwalletclient.so.1 => /usr/lib/libkwalletclient.so.1 (0x40fe4000)
libkdecore.so.4 => /usr/lib/libkdecore.so.4 (0x40ff4000)
libDCOP.so.4 => /usr/lib/libDCOP.so.4 (0x4121f000)
libdl.so.2 => /lib/libdl.so.2 (0x41254000)
libresolv.so.2 => /lib/libresolv.so.2 (0x41257000)
libutil.so.1 => /lib/libutil.so.1 (0x41269000)
libart_lgpl_2.so.2 => /usr/lib/libart_lgpl_2.so.2 (0x4126c000)
libidn.so.11 => /usr/lib/libidn.so.11 (0x41282000)
libkdefx.so.4 => /usr/lib/libkdefx.so.4 (0x412b2000)
libqt-mt.so.3 => /usr/lib/libqt-mt.so.3 (0x412df000)
libpng12.so.0 => /opt/gtk+-2.12.9/lib/libpng12.so.0 (0x419ca000)
libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x419ed000)
libSM.so.6 => /usr/X11R6/lib/libSM.so.6 (0x419fa000)
libICE.so.6 => /usr/X11R6/lib/libICE.so.6 (0x41a02000)
libpthread.so.0 => /lib/libpthread.so.0 (0x41a19000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0x41a6b000)
libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x41a73000)
libz.so.1 => /usr/lib/libz.so.1 (0x41b2f000)
libfam.so.0 => /usr/lib/libfam.so.0 (0x41b41000)
libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x41b49000)
libm.so.6 => /lib/libm.so.6 (0x41c03000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x41c26000)
libc.so.6 => /lib/libc.so.6 (0x41c2f000)
librt.so.1 => /lib/librt.so.1 (0x41d62000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
libfontconfig.so.1 => /opt/gtk+-2.12.9/lib/libfontconfig.so.1 (0x41d75000)
libXrandr.so.2 => /opt/gtk+-2.12.9/lib/libXrandr.so.2 (0x41d9f000)
libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0x41da4000)
libXft.so.2 => /opt/gtk+-2.12.9/lib/libXft.so.2 (0x41dad000)
libfreetype.so.6 => /opt/gtk+-2.12.9/lib/libfreetype.so.6 (0x41dc0000)
libxml2.so.2 => /opt/gtk+-2.12.9/lib/libxml2.so.2 (0x41e30000)
They are exactly the same as the linkings in DSL 2.4 with gtk set up - even the md5sums of the output files matched. And k3b works with DSL 2.4 for me without a hitch. I did not investigate too deep at the time why k3b does not play as well with DSL 3.3 since the extensions are our focus here. /var/tmp needed to be created, but that is where I stopped. It seems that something in later DSL versions or in your remastered 3.3 is causing a conflict between the two extensions. What steps did you take to get k3b working in your DSL 3.3?
It would be nice if both these extensions worked together with the various DSL versions, and I will dig a little deeper into what may be causing this. Let me know how a stock DSL 3.3 works for you in this matter.
Thanks
JW
Hi Jason,
To get K3B to work I just used the commandline in emelfm as root using the full path to the executable. I tried it just now again and it started properly as far as I can see. The path is: /opt/k3b/usr/bin/k3b and that's it. The xshell doesn't work though. I haven't slept much tonight but I've just had a jolt cola and a handful of painkillers so we'll se what happens with my sorry excuse for a body. I'll get back to you later.
Keep on having fun with this wonderful distro,
meo
Next Page...
original here.