Networking :: lucent modem + Damn Small Linux



I have a internal lucent modem and it was installed by dsl
but when I try to dial to my ISP
it always gives the 2 errors
the first error is: warning impossible to change modem restrictions in read-only system
and the other is:
no dial tone, but I've tested all connections and when I use this modem on win98 it works perfectly......
if someone knows how to make this modem works on DSL
please... post here
The first error is unimportant.

The other could be just about anything.  How did you configure the modem and dialing properies? Lucent winmodems should automatically be symlinked to /dev/modem.

Please post the full output of your terminal here.
here is the output of my terminal:
Quote

May 23 05:24:11 box syslog.info syslogd started: BusyBox v1.00 (2006.01.04-23:00+0000)
May 23 05:24:11 box authpriv.notice sudo:     root : TTY=ttyp0 ; PWD=/ramdisk/home/dsl ; USER=root ; COMMAND=/usr/bin/tail -f /var/log/messages
May 23 05:24:13 box local2.notice pppd[742]: pppd 2.4.1 started by root, uid 0
May 23 05:24:14 box local2.warn pppd[742]: Couldn't restrict write permissions to /dev/ttyS14: Read-only file system
May 23 05:24:15 box local2.info chat[745]: abort on (BUSY)
May 23 05:24:15 box local2.info chat[745]: abort on (NO CARRIER)
May 23 05:24:15 box local2.info chat[745]: abort on (VOICE)
May 23 05:24:15 box local2.info chat[745]: abort on (NO DIALTONE)
May 23 05:24:15 box local2.info chat[745]: abort on (NO DIAL TONE)
May 23 05:24:15 box local2.info chat[745]: abort on (NO ANSWER)
May 23 05:24:15 box local2.info chat[745]: abort on (DELAYED)
May 23 05:24:15 box local2.info chat[745]: send (ATZ^M)
May 23 05:24:15 box local2.info chat[745]: expect (OK)
May 23 05:24:18 box local2.info chat[745]: ATZ^M^M
May 23 05:24:18 box local2.info chat[745]: OK
May 23 05:24:18 box local2.info chat[745]:  -- got it
May 23 05:24:18 box local2.info chat[745]: send (ATDT21090221^M)
May 23 05:24:19 box local2.info chat[745]: expect (CONNECT)
May 23 05:24:19 box local2.info chat[745]: ^M
May 23 05:24:31 box local2.info chat[745]: ATDT21090221^M^M
May 23 05:24:31 box local2.info chat[745]: NO DIALTONE
May 23 05:24:31 box local2.info chat[745]:  -- failed
May 23 05:24:31 box local2.info chat[745]: Failed (NO DIALTONE)
May 23 05:24:31 box local2.err pppd[742]: Connect script failed
May 23 05:24:33 box local2.info pppd[742]: Exit.

I dont know where is the trouble:
if put pppd to /dev/modem it gives the same error.
on win98 the name of the modem is: Agere systems PCI Soft Modem, but on DSL it appears as lucent technology win modem.
What version of DSL are you using? Do you receive a message during boot that a lucent winmodem was detected? Having DSL tell you what hardware you have does not necessarily mean it was installed. If you have a DSL older than version 2.0 the modem was not installed. Anything newer should be fine.

Since you're not getting a dial tone, there's either something wrong with the modem or phone line, or it's not configured properly. So I ask again, how did you configure the modem and dialing properies?
I'm using the version 3.1, and yes I receive a message during boot that a lucent winmodem was found.
and I put the pppd to use the device /dev/modem and /dev/ttyS14 and it gives same message
I found some informations that lucent always is symlinked to /dev/modem during instalation.
and I have no problem with this modem in win98..... so this modem is working.
have something that I forgot to configure????
I think that I have to download wvdial what do you think about this ????
its a good idea???? :rock:
Next Page...
original here.