Networking :: bluez-utils

I have some troubles with the new version of bluez-utils.

I have a file called conect-blue.sh to make step by step the internet conexion via mobil phone:

----------------------------------
#!/bin/bash

. /etc/init.d/dsl-functions

echo "cargar modulo bluez"
echo -n "Presionar una tecla... "; read gagme
sudo insmod bluez

echo "cargar modulo hci_uart"
echo -n "Presionar una tecla... "; read gagme
sudo insmod hci_uart

echo "cargar modulo sco"
echo -n "Presionar una tecla... "; read gagme
sudo insmod sco

echo "cargar modulo l2cap"
echo -n "Presionar una tecla... "; read gagme
sudo insmod l2cap

echo "cargar modulo rfcomm"
echo -n "Presionar una tecla... "; read gagme
sudo insmod rfcomm

echo "cargar hcid"
echo -n "Presionar una tecla... "; read gagme
sudo hcid

echo "Conectar con pcmcia bluetooth"
echo -n "Presionar una tecla... "; read gagme

sudo hciattach -s 57600 /dev/ttyS17 bcsp

echo "Levantar conexion bluetooth"
echo -n "Presionar una tecla... "; read gagme

sudo hciconfig hci0 up

echo "reiniciar hcid"
echo -n "Presionar una tecla... "; read gagme
sudo hcid restart

echo "escanear el telefono"
echo -n "Presionar una tecla... "; read gagme
sudo hcitool scan

echo "conectar S68"
echo -n "Presionar una tecla... "; read gagme
sudo hcitool cc xx:xx:xx:xx:xx:xx

echo "autentificar S68"
echo -n "Presionar una tecla... "; read gagme
sudo hcitool auth xx:xx:xx:xx:xx:xx

echo "unir con S68"
echo -n "Presionar una tecla... "; read gagme
sudo rfcomm bind 0 xx:xx:xx:xx:xx:xx 2

echo "mostrar rfcomm"
echo -n "Presionar una tecla... "; read gagme
sudo rfcomm show

echo "crear nodo"
echo -n "Presionar una tecla... "; read gagme
sudo mknod -m 666 /dev/rfcomm0 c 216 0

echo "cargar sdpd"
echo -n "Presionar una tecla... "; read gagme
sudo sdpd

echo "asignar canal 2"
echo -n "Presionar una tecla... "; read gagme
sudo sdptool add --channel=2 DUN

echo "realizar conexion gprs"
echo "terminar conexion con: CTRL-C"
echo -n "Presionar una tecla... "; read gagme
sudo /usr/sbin/pppd call gprs

echo "Completada la conexion"
echo -n "Presionar una tecla... "; read gagme
exit 0
----------------------------------------------

this woks correctly with the bt_modules-2.4.31 and bluez-utils.unc old version of 13,61 Mb, but with the two last versions of bluez-utils.uci 731,46 Kb and the last of 657,54 Kb I have this error when it try to exec hcid (all the previous insmod to hcid goes ok):

....
cargar hcid
Presionar una tecla...
sudo: hcid: command not found
....

I can see hcid in /opt/bluez-utils/sbin/hcid
but seems that is not in the path

With bluez-utils.unc (old version) I can see hcid in /usr/sbin

perhaps because one is .uci and the other is .unc., but the reality is that in the .uci don't find it.

The next commands to hcid don't works for the same reason (command not found)

The solution I found is to call this files with:

----------
...
echo "cargar hcid"
echo -n "Presionar una tecla... "; read gagme
sudo /opt/bluez-utils/sbin/hcid
...
and so on with the other commands (some with /opt/bluez-utils/sbin/ and some with /opt/bluez-utils/bin)

perhaps, is posible to do this within the .uci? or to put a path? or something else?

I hope my conect-blue.sh can be usefull to someone

Thanks.

(Sorry that my english is not so good)