iB::Topic::USB FlashDrive Not Booting

	Damn Small Linux :: Damn Small Linux Board The DSL Forums

» Welcome Guest
[ Log In :: Register ]

Damn Small Linux Board » Damn Small Linux » USB booting » USB FlashDrive Not Booting

		Mini-ITX Boards Sale, Fanless BareBones Mini-ITX, Bootable 1G DSL USBs, 533MHz Fanless PC <-- SALE $200 each!
		Get The Official Damn Small Linux Book. DSL Market , Great VPS hosting provided by Tektonic

[ Track this topic :: Email this topic :: Print this topic ]

Topic: USB FlashDrive Not Booting, Files are on there, but it isn't working

< Next Oldest | Next Newest >

Mechcozmo

Group: Members
Posts: 33
Joined: Sep. 2004

Posted: Jan. 19 2005,04:52

I followed the instructions in this thread but my drive isn't starting.

In the BIOS, under removable media, I chose USB ZIP and inserted the flashdrive in one of four of the rear USB ports. Right after where the BIOS scans the PCI bus, it hung. Just waited. I don't know exactly what it was waiting for, but it sure as heck wasn't starting. I gave it about a minute before killing the startup.

I then repeated the above with USB FDD, ATAPI MO, ZIP, and LS120.
I can see that the drive shows up and is recognized because it appears as "USB: LEXAR JUMPDRIVE" right above my various other ATA devices.

I also tried starting up from it in Virtual PC, but no-go there. Microsuck apparently didn't allow the virtual BIOS to start up from USB devices, but floppies are OK for some reason. Meh.

Anyone got an idea? My motherboard is an AV7600 by VIA. (A nice one too, IMO) And it seems to support USB startup because of the "USB ZIP" option. But no go....

ke4nt1

Group: Members
Posts: 2329
Joined: Oct. 2003

Posted: Jan. 19 2005,05:50

Try this thread, specifically with using sfdisk to change your drive
geometry to be similar to what a usb-zip would be, specifically
having 32 sectors..

Run cfdisk /dev/sda to see what it is now..
Change it if necessary..

Booting from usb-zip usually works if your pendrive has the 32 sectors per track.

73
ke4nt

goldenratiophi Offline

Group: Members
Posts: 15
Joined: Jan. 2005

Posted: Jan. 19 2005,20:17

1. Boot DSL from the CD.
2. Go to the right click menu->Apps->Tools->Install to USB Pendrive. Running the script will take a few minutes. If it closes a few seconds after you answer all the prompts, then reformat (type 6 for fdisk users; aka DOS, and not DOS32) your pendrive and try again.

Mechcozmo

Group: Members
Posts: 33
Joined: Sep. 2004

Posted: Jan. 19 2005,21:42

Is the geometry "sticky" or, if I reformat it with another utility will the geometry change?
I commonly use this drive to transfer files from my PowerBook to Windoze computers, so if I would be able to copy the files on and off at will it would be really nice.

Example: Files need to be transfered, so DSL stuff comes off, files go on. Then, they swap when I don't need the files anymore.
Make sense? So if I were to have the geometry set and then later reformat it for whatever reason would I need to change the geometry again?

I hope I made sense there...:D

3 replies since Jan. 19 2005,04:52

< Next Oldest | Next Newest >

[ Track this topic :: Email this topic :: Print this topic ]

Damn Small Linux Board » Damn Small Linux » USB booting » USB FlashDrive Not Booting