HowtoForum: Other Help Topics Topic: Howto started by: pradi Posted by pradi on Mar. 18 2005,16:54
The 1.0rc CD burn from download and try to boot on ME6000. It always stop while probing H/W. The same CD can boot from AMD or Intel system as I use now with no problem. Do anyone have some trick or guide me to DSL forum discussed about Install DSL on MiniITX especially ME6000.
Posted by AwPhuch on Mar. 19 2005,00:35
Have you tried any of the bootloader cheatcodes? Perhaps ACPI needs to be disabledBrian AwPhuch Posted by pradi on Mar. 19 2005,04:47
Thanks Brian AwPhuch. My system already disable ACPI in BIOS(?) if i understand correctly. But about the bootloader,I dont use bootloader yet it come with DSL CD. Please correct for any misunderstand. And sometime boot it report Kernel panic at the end.
Posted by cbagger01 on Mar. 19 2005,19:48
Try starting withdsl failsafe and see if it works. FYI, you can disable ACPI in BIOS but this does not prevent the operating system from trying to use ACPI and it may lock up. so, dsl noapm noapic acpi=off may still help. Posted by pradi on Mar. 20 2005,04:41
Thanks for suggestion. I try with failsafe and dsl no.... as recommendation the result almost the same with cloop error report as below example. The good sign for me that it recognise my CPU once only. The report are described as follow:Creating directories and symlinks on ramdisk...cloop: error -3 uncompressing block 152 65536/65534/31396/0 2359410-2390806 cloop: error -3 uncompressing block 152 65536/65534/31396/0 2359410-2390806 cloop: error -3 uncompressing block 152 65536/65534/31396/0 2359410-2390806 cloop: error -3 uncompressing block 152 65536/65534/31396/0 2359410-2390806 Bus error /linuxrc: cannot create /var/run/utmp: directory nonexistent kmod: failed to exec /sbin/modprobe -s -k nls_cp437, errno = 2 kmod: failed to exec /sbin/modprobe -s -k nls_cp437, errno = 2 kmod: failed to exec /sbin/modprobe -s -k nls_cp437, errno = 2 kmod: failed to exec /sbin/modprobe -s -k nls_cp437, errno = 2 VFS: Mount root (vfat filesystem) readonly. Trying to move old root to /initrd ... failed Unmount old root ..... ..... .... Process swapper (pid: 1, stackpage=cdfdb000) Stack: (address?....) .... Call Trace: (address?....) code: 8b 01 .. ... ...... <0>kernel panic: Attempted to kill init! However,while waiting for reply , my old P166 64M boot with HD installed on AMD 2000+XP system and Notebook Cel400 256M are successfully installed and boot without problem. But while booting with LiveCD and HD installed from others system it stop with Kernel panic Example from Booting by LiveCD It reported:Warning: unable to open an initial console. Kernel panic: No init found. Trypassing init=option to kernel. with flashing of Cap Scroll lock lamps. Posted by pradi on Mar. 20 2005,04:47
The above comment i try on ME6000 system unsuccessfully. |