2.4.31 'kernelsource' and "linux-kernel-headers"
Forum: System
Topic: 2.4.31 'kernelsource' and "linux-kernel-headers"
started by: john.martzouco
Posted by john.martzouco on Nov. 17 2007,22:54
Has anybody packaged the kernel sources for version 2.4.31?
I'd like to try and compile drivers for my Encore wireless pcmcia card and think I may need kernelsource.dsl and linux-kernel-headers.dsl in the correct version for dsl4.1
I've read that these two packages are strip-downs from the Knoppix kernel sources. Is it possible for a newbie like me to help create the packages for 2.4.31 and submit them to the MyDsl repertory?
This is my first time building a driver for any Linux distribution... any helpful feedback would be appreciated.
Thanks,
John
Posted by ^thehatsrule^ on Nov. 17 2007,23:05
It's the same since the 2.x-2.1b versions, so check [mirror]/archive/sources-2.1
Afaik tarball is just a copy of the vanilla source, so you'll have to manually extract that somewhere, apply the patch and use that config as a base.
I guess the one in /current should be changed as only the RC's used that.
Posted by roberts on Nov. 17 2007,23:10
The 2.4.31 kernel is posted in the download current/kernel/ directory
Should be on all mirrors for example:
< ftp://ftp.oss.cc.gatech.edu/pub....l >
Posted by ^thehatsrule^ on Nov. 17 2007,23:52
hm, my bad - I guess that was just from my cache.
Posted by john.martzouco on Nov. 17 2007,23:55
Thanks Robert,
I've downloaded them and am reading the documentation to get started.
Posted by roberts on Nov. 18 2007,03:18
John, your other post got buried in with a different card.
It looks like the ENPWI-G2 is a cardbus pcmcia.
In order to get DSL (kermel 2.4.x) to recognize cardbus on older laptops one often needs to boot with pci=assign_busses
If you use the DSLpanel, pcmcia tool, was the card recognized?
I also notice that I could not find your card in the ndiswrapper supported card list. But first I would look in the pcmcia tool and see if the card is properly identified.
Posted by john.martzouco on Nov. 18 2007,13:08
Robert, I was so incredibly impressed that the DSLPanel tool wrote out its data to /home/john/card.txt! I was trying to figure out how I was going to post its output... and stumbled on the file accidentally (and with great luck!) Another great feature!
I tried the pci=assign_busses cheat. The ethernet card that I have in slot 0 shows up with lots of information; the Realtek card in slot 1, almost none:
| Code Sample |
Socket 0:
3.3V CardBus card
function 0: [ready]
Socket 1:
3.3V CardBus card
function 0: [ready]
Socket 0:
Vcc 3.3V Vpp1 3.3V Vpp2 3.3V
interface type is "cardbus"
irq 11 [exclusive] [level]
function 0:
Socket 1:
Vcc 3.3V Vpp1 3.3V Vpp2 3.3V
interface type is "cardbus"
irq 11 [exclusive] [level]
function 0:
Socket 0:
product info: "Xircom", "CardBus Ethernet II 10/100", "CBEII-10/100", "1.03"
manfid: 0x0105, 0x0103
function: 6 (network)
Socket 1:
no product info available
PRODID_1="Xircom"
PRODID_2="CardBus Ethernet II 10/100"
PRODID_3="CBEII-10/100"
PRODID_4="1.03"
MANFID=0105,0103
FUNCID=6
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
|
I ran lspci, and I see the card in the results:
| Code Sample |
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:11.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
0000:00:11.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc)
0000:02:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
0000:03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8185 (rev 20)
|
This card runs very nicely with ndiswrapper on the latest puppy (3.01). I'm trying to find out what version of ndiswrapper it uses right now.
The results were the same without the other card installed in slot 0. I noticed on the first page output of the pcmcia tool that both cards show irq 11... is this okay?... but it makes no difference in the end because the system reacts the same without the Xircom in it at all.
Thanks,
John
Posted by john.martzouco on Nov. 20 2007,19:44
Okay, I've been reading instructions and trying to understand how to set up my system to compile the driver and I have a couple of questions:
1) do I tar -zxvf the kernel.tar.qz into /usr/src?
I don't want to rebuild the kernel, I just want to compile a driver for one piece of hardware.
2) do I patch -0 < the_patch_file? Will it know which files to patch if I don't run it from /usr/src?
3) the .conf file, do I simply place it in /usr/src?
4) if my compile is successful, how many files will I need to copy if I want to apply them again to a later DSL installation without rebuilding again? I guess this can be rephrased as, "how do I know what modules will be created from the build and where will they go?"
Here are the Make files:
rtl818x
| Code Sample |
#EXTRA_CFLAGS += -DCONFIG_IEEE80211_NOWEP=y
#EXTRA_CFLAGS += -DCONFIG_RTL8180_IOMAP
EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/wireless
EXTRA_CFLAGS += -std=gnu89
EXTRA_CFLAGS += -O2
CC = gcc
#EXTRA_CFLAGS += -mhard-float -DCONFIG_FORCE_HARD_FLOAT=y
#ieee80211-r8180-objs := ieee80211.o ieee80211_rx.o ieee80211_tx.o ieee80211_wx.o ieee80211_module.o
#ieee80211_crypt-r8180 := ieee80211_crypt-r8180.o
r8180-objs := r8180_core.o r8180_sa2400.o r8180_93cx6.o r8180_wx.o r8180_max2820.o r8180_gct.o r8180_rtl8225.o r8180_rtl8255.o
#ieee80211_crpt_wep-r8180-objs := ieee80211_crypt_wep-r8180.o
obj-m += r8180.o
#obj-m +=ieee80211-r8180.o
#obj-m +=ieee80211_crypt-r8180.o
#obj-m +=ieee80211_crypt_wep-r8180.o
MODULES_LST := r8180.ko
#ieee80211-r8180.ko ieee80211-r8180_crypt.ko
#MODULES_ALG_LST := ieee80211_crypt_wep-r8180.ko
KVER := $(shell uname -r)
KSRC := /lib/modules/$(KVER)/build
INSTALL_PREFIX :=
all: modules
clean:
rm -f *.mod.c *.mod *.o .*.cmd *.ko
rm -rf $(PWD)/tmp
modules:
# $(MAKE) -C $(KSRC) SUBDIRS=$(PWD) MODVERDIR=$(PWD) modules
$(MAKE) -C $(KSRC) M=$(PWD) CC=$(CC) modules
MODDESTDIR := /lib/modules/$(KVER)/kernel/drivers/net/wireless
#MOD_ALGDESTDIR := /lib/modules/$(KVER)/kernel/drivers/net/wireless/alg
install: modules
mkdir -p $(MODDESTDIR)
# mkdir -p $(MOD_ALGDESTDIR)
install -p -m 644 $(MODULES_LST) $(MODDESTDIR)
# install -p -m 644 $(MODULES_ALG_LST) $(MOD_ALGDESTDIR)
uninstall:
cd $(MODDESTDIR) && rm $(MODULES_LST)
# cd $(MOD_ALGDESTDIR) && rm $(MODULES_ALG_LST)
load:
./module_load
unload:
./module_unload
|
ieee80211
| Code Sample |
EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/wireless
EXTRA_CFLAGS += -O2
CC = gcc
ieee80211-rtl-objs := ieee80211_softmac.o ieee80211_rx.o ieee80211_tx.o ieee80211_wx.o ieee80211_module.o ieee80211_softmac_wx.o
ieee80211_crypt-rtl-objs := ieee80211_crypt.o
ieee80211_crypt_tkip-rtl-objs := ieee80211_crypt_tkip.o
ieee80211_crypt_ccmp-rtl-objs := ieee80211_crypt_ccmp.o
ieee80211_crypt_wep-rtl-objs := ieee80211_crypt_wep.o
obj-m +=ieee80211-rtl.o
obj-m +=ieee80211_crypt-rtl.o
obj-m +=ieee80211_crypt_wep-rtl.o
obj-m +=ieee80211_crypt_tkip-rtl.o
obj-m +=ieee80211_crypt_ccmp-rtl.o
KVER := $(shell uname -r)
KSRC := /lib/modules/$(KVER)/build
INSTALL_PREFIX :=
all: modules
clean:
rm -f *.mod.c *.mod *.o .*.cmd *.ko
rm -rf $(PWD)/tmp
modules:
# $(MAKE) -C $(KSRC) SUBDIRS=$(PWD) MODVERDIR=$(PWD) modules
$(MAKE) -C $(KSRC) M=$(PWD) CC=$(CC) modules
|
wpa_supplicant
| Code Sample |
ifndef CC
CC=gcc
endif
ifndef CFLAGS
CFLAGS = -MMD -O2 -Wall -g
endif
# Include directories for CVS version
CFLAGS += -I. -I../utils -I../hostapd
ALL=wpa_supplicant wpa_passphrase wpa_cli
all: verify_config $(ALL)
verify_config:
@if [ ! -r .config ]; then \
echo 'Building wpa_supplicant requires a configuration file'; \
echo '(.config). See README for more instructions. You can'; \
echo 'run "cp defconfig .config" to create an example'; \
echo 'configuration.'; \
exit 1; \
fi
mkconfig:
@if [ -e .config ]; then \
echo '.config exists - did not replace it'; \
exit 1; \
fi
echo CONFIG_DRIVER_HOSTAP=y >> .config
echo CONFIG_DRIVER_WEXT=y >> .config
echo CONFIG_WIRELESS_EXTENSION=y >> .config
install: all
mkdir -p $(DESTDIR)/usr/local/sbin/
for i in $(ALL); do cp $$i $(DESTDIR)/usr/local/sbin/$$i; done
OBJS = config.o \
eloop.o common.o md5.o \
rc4.o sha1.o
OBJS_p = wpa_passphrase.o sha1.o md5.o
OBJS_c = wpa_cli.o wpa_ctrl.o
-include .config
ifdef CONFIG_EAPOL_TEST
CFLAGS += -Werror -DEAPOL_TEST
endif
ifndef CONFIG_BACKEND
CONFIG_BACKEND=file
endif
ifeq ($(CONFIG_BACKEND), file)
OBJS += config_file.o base64.o
CFLAGS += -DCONFIG_BACKEND_FILE
endif
ifdef CONFIG_DRIVER_HOSTAP
CFLAGS += -DCONFIG_DRIVER_HOSTAP
OBJS_d += driver_hostap.o
CONFIG_WIRELESS_EXTENSION=y
endif
ifdef CONFIG_DRIVER_WEXT
CFLAGS += -DCONFIG_DRIVER_WEXT
CONFIG_WIRELESS_EXTENSION=y
endif
ifdef CONFIG_DRIVER_PRISM54
CFLAGS += -DCONFIG_DRIVER_PRISM54
OBJS_d += driver_prism54.o
CONFIG_WIRELESS_EXTENSION=y
endif
ifdef CONFIG_DRIVER_HERMES
CFLAGS += -DCONFIG_DRIVER_HERMES
OBJS_d += driver_hermes.o
CONFIG_WIRELESS_EXTENSION=y
endif
ifdef CONFIG_DRIVER_MADWIFI
CFLAGS += -DCONFIG_DRIVER_MADWIFI
OBJS_d += driver_madwifi.o
CONFIG_WIRELESS_EXTENSION=y
endif
ifdef CONFIG_DRIVER_ATMEL
CFLAGS += -DCONFIG_DRIVER_ATMEL
OBJS_d += driver_atmel.o
CONFIG_WIRELESS_EXTENSION=y
endif
ifdef CONFIG_DRIVER_NDISWRAPPER
CFLAGS += -DCONFIG_DRIVER_NDISWRAPPER
OBJS_d += driver_ndiswrapper.o
CONFIG_WIRELESS_EXTENSION=y
endif
ifdef CONFIG_DRIVER_BROADCOM
CFLAGS += -DCONFIG_DRIVER_BROADCOM
OBJS_d += driver_broadcom.o
endif
ifdef CONFIG_DRIVER_IPW
CFLAGS += -DCONFIG_DRIVER_IPW
OBJS_d += driver_ipw.o
CONFIG_WIRELESS_EXTENSION=y
endif
ifdef CONFIG_DRIVER_BSD
CFLAGS += -DCONFIG_DRIVER_BSD
OBJS_d += driver_bsd.o
CONFIG_DNET_PCAP=y
CONFIG_L2_FREEBSD=y
endif
ifdef CONFIG_DRIVER_NDIS
CFLAGS += -DCONFIG_DRIVER_NDIS
OBJS_d += driver_ndis.o driver_ndis_.o
CONFIG_DNET_PCAP=y
CONFIG_WINPCAP=y
endif
ifdef CONFIG_DRIVER_WIRED
CFLAGS += -DCONFIG_DRIVER_WIRED
OBJS_d += driver_wired.o
endif
ifdef CONFIG_DRIVER_TEST
CFLAGS += -DCONFIG_DRIVER_TEST
OBJS_d += driver_test.o
endif
ifdef CONFIG_DNET_PCAP
CFLAGS += -DUSE_DNET_PCAP
ifdef CONFIG_WINPCAP
OBJS += l2_packet_pcap.o
CFLAGS += -DCONFIG_WINPCAP
LIBS += -lwpcap -lpacket
LIBS_w += -lwpcap
else
ifdef CONFIG_L2_FREEBSD
OBJS += l2_packet_freebsd.o
LIBS += -lpcap
else
OBJS += l2_packet_pcap.o
LIBS += -ldnet -lpcap
endif
endif
else
OBJS += l2_packet_linux.o
endif
ifdef CONFIG_EAP_TLS
# EAP-TLS
CFLAGS += -DEAP_TLS
OBJS += eap_tls.o
TLS_FUNCS=y
CONFIG_IEEE8021X_EAPOL=y
endif
ifdef CONFIG_EAP_PEAP
# EAP-PEAP
CFLAGS += -DEAP_PEAP
OBJS += eap_peap.o
TLS_FUNCS=y
CONFIG_EAP_MSCHAPV2=y
CONFIG_IEEE8021X_EAPOL=y
CONFIG_EAP_TLV=y
endif
ifdef CONFIG_EAP_TTLS
# EAP-TTLS
CFLAGS += -DEAP_TTLS
OBJS += eap_ttls.o
MS_FUNCS=y
TLS_FUNCS=y
CONFIG_EAP_MD5=y
CONFIG_IEEE8021X_EAPOL=y
endif
ifdef CONFIG_EAP_MD5
# EAP-MD5 (also used by EAP-TTLS)
CFLAGS += -DEAP_MD5
OBJS += eap_md5.o
CONFIG_IEEE8021X_EAPOL=y
endif
# backwards compatibility for old spelling
ifdef CONFIG_MSCHAPV2
CONFIG_EAP_MSCHAPV2=y
endif
ifdef CONFIG_EAP_MSCHAPV2
# EAP-MSCHAPv2 (also used by EAP-PEAP)
CFLAGS += -DEAP_MSCHAPv2
OBJS += eap_mschapv2.o
MS_FUNCS=y
CONFIG_IEEE8021X_EAPOL=y
endif
ifdef CONFIG_EAP_GTC
# EAP-GTC (also used by EAP-PEAP)
CFLAGS += -DEAP_GTC
OBJS += eap_gtc.o
CONFIG_IEEE8021X_EAPOL=y
endif
ifdef CONFIG_EAP_OTP
# EAP-OTP
CFLAGS += -DEAP_OTP
OBJS += eap_otp.o
CONFIG_IEEE8021X_EAPOL=y
endif
ifdef CONFIG_EAP_SIM
# EAP-SIM
CFLAGS += -DEAP_SIM
OBJS += eap_sim.o
CONFIG_IEEE8021X_EAPOL=y
CONFIG_EAP_SIM_COMMON=y
endif
ifdef CONFIG_EAP_LEAP
# EAP-LEAP
CFLAGS += -DEAP_LEAP
OBJS += eap_leap.o
MS_FUNCS=y
CONFIG_IEEE8021X_EAPOL=y
endif
ifdef CONFIG_EAP_PSK
# EAP-PSK
CFLAGS += -DEAP_PSK
OBJS += eap_psk.o eap_psk_common.o
CONFIG_IEEE8021X_EAPOL=y
NEED_AES=y
endif
ifdef CONFIG_EAP_AKA
# EAP-AKA
CFLAGS += -DEAP_AKA
OBJS += eap_aka.o
CONFIG_IEEE8021X_EAPOL=y
CONFIG_EAP_SIM_COMMON=y
endif
ifdef CONFIG_EAP_SIM_COMMON
OBJS += eap_sim_common.o
NEED_AES=y
endif
ifdef CONFIG_EAP_TLV
# EAP-TLV
CFLAGS += -DEAP_TLV
OBJS += eap_tlv.o
endif
ifdef CONFIG_EAP_FAST
# EAP-FAST
CFLAGS += -DEAP_FAST
OBJS += eap_fast.o
TLS_FUNCS=y
endif
ifdef CONFIG_EAP_PAX
# EAP-PAX
CFLAGS += -DEAP_PAX
OBJS += eap_pax.o eap_pax_common.o
CONFIG_IEEE8021X_EAPOL=y
endif
ifdef CONFIG_IEEE8021X_EAPOL
# IEEE 802.1X/EAPOL state machines (e.g., for RADIUS authentication)
CFLAGS += -DIEEE8021X_EAPOL
OBJS += eapol_sm.o eap.o
endif
ifdef CONFIG_PCSC
# PC/SC interface for smartcards (USIM, GSM SIM)
CFLAGS += -DPCSC_FUNCS -I/usr/include/PCSC
OBJS += pcsc_funcs.o
# -lpthread may not be needed depending on how pcsc-lite was configured
LIBS += -lpcsclite -lpthread
endif
ifndef CONFIG_TLS
CONFIG_TLS=openssl
endif
ifdef TLS_FUNCS
# Shared TLS functions (needed for EAP_TLS, EAP_PEAP, EAP_TTLS, and EAP_FAST)
CFLAGS += -DEAP_TLS_FUNCS
OBJS += eap_tls_common.o
ifeq ($(CONFIG_TLS), openssl)
OBJS += tls_openssl.o
LIBS += -lssl -lcrypto
LIBS_p += -lcrypto
endif
ifeq ($(CONFIG_TLS), gnutls)
OBJS += tls_gnutls.o
LIBS += -lgnutls -lgcrypt -lgpg-error
LIBS_p += -lgcrypt
endif
ifeq ($(CONFIG_TLS), schannel)
OBJS += tls_schannel.o
# Using OpenSSL for crypto at the moment; to be replaced
LIBS += -lcrypto
LIBS_p += -lcrypto
endif
ifdef CONFIG_SMARTCARD
ifndef CONFIG_NATIVE_WINDOWS
ifndef CONFIG_L2_FREEBSD
LIBS += -ldl
endif
endif
endif
NEED_CRYPTO=y
else
OBJS += tls_none.o
endif
ifdef CONFIG_PKCS12
CFLAGS += -DPKCS12_FUNCS
endif
ifdef CONFIG_SMARTCARD
CFLAGS += -DCONFIG_SMARTCARD
endif
ifdef MS_FUNCS
OBJS += ms_funcs.o
NEED_CRYPTO=y
endif
ifdef NEED_CRYPTO
ifndef TLS_FUNCS
ifeq ($(CONFIG_TLS), openssl)
LIBS += -lcrypto
LIBS_p += -lcrypto
endif
ifeq ($(CONFIG_TLS), gnutls)
LIBS += -lgcrypt
LIBS_p += -lgcrypt
endif
ifeq ($(CONFIG_TLS), schannel)
# Using OpenSSL for crypto at the moment; to be replaced
LIBS += -lcrypto
LIBS_p += -lcrypto
endif
endif
ifeq ($(CONFIG_TLS), openssl)
OBJS += crypto.o
OBJS_p += crypto.o
endif
ifeq ($(CONFIG_TLS), gnutls)
OBJS += crypto_gnutls.o
OBJS_p += crypto_gnutls.o
endif
ifeq ($(CONFIG_TLS), schannel)
# Using OpenSSL for crypto at the moment; to be replaced
OBJS += crypto.o
OBJS_p += crypto.o
endif
endif
ifdef CONFIG_WIRELESS_EXTENSION
CFLAGS += -DCONFIG_WIRELESS_EXTENSION
OBJS_d += driver_wext.o
endif
ifdef CONFIG_CTRL_IFACE
CFLAGS += -DCONFIG_CTRL_IFACE
OBJS += ctrl_iface.o
endif
ifdef CONFIG_READLINE
CFLAGS += -DCONFIG_READLINE
LIBS_c += -lncurses -lreadline
endif
ifdef CONFIG_NATIVE_WINDOWS
CFLAGS += -DCONFIG_NATIVE_WINDOWS -DCONFIG_CTRL_IFACE_UDP
LIBS += -lws2_32 -lgdi32 -lcrypt32
LIBS_c += -lws2_32
endif
ifdef CONFIG_NO_STDOUT_DEBUG
CFLAGS += -DCONFIG_NO_STDOUT_DEBUG
endif
ifdef CONFIG_IPV6
# for eapol_test only
CFLAGS += -DCONFIG_IPV6
endif
ifndef CONFIG_NO_WPA
OBJS += wpa.o preauth.o
NEED_AES=y
else
CFLAGS += -DCONFIG_NO_WPA
endif
ifdef NEED_AES
OBJS += aes_wrap.o
endif
OBJS += wpa_supplicant.o events.o
OBJS_t := $(OBJS) eapol_test.o radius.o radius_client.o
OBJS_t2 := $(OBJS) preauth_test.o
OBJS += main.o drivers.o $(OBJS_d)
wpa_supplicant: .config $(OBJS)
$(CC) -o wpa_supplicant $(OBJS) $(LIBS)
eapol_test: .config $(OBJS_t)
$(CC) -o eapol_test $(OBJS_t) $(LIBS)
preauth_test: .config $(OBJS_t2)
$(CC) -o preauth_test $(OBJS_t2) $(LIBS)
wpa_passphrase: $(OBJS_p)
$(CC) -o wpa_passphrase $(OBJS_p) $(LIBS_p)
wpa_cli: $(OBJS_c)
$(CC) -o wpa_cli $(OBJS_c) $(LIBS_c)
win_if_list: win_if_list.c
$(CC) -o $@ win_if_list.c $(CFLAGS) $(LIBS_w)
# parameters for Microsoft Visual C++ Toolkit 2003 compiler
CL=cl
CLDIR=C:\Program Files\Microsoft Visual C++ Toolkit 2003
PSDKDIR=C:\Program Files\Microsoft Platform SDK for Windows XP SP2
CLFLAGS=-O
CLLIBS=wbemuuid.lib libcmt.lib kernel32.lib uuid.lib ole32.lib oleaut32.lib \
ws2_32.lib
ndis_events: ndis_events.cpp
INCLUDE="$(CLDIR)\include;$(PSDKDIR)\Include" \
LIB="$(CLDIR)\lib;$(PSDKDIR)\Lib" \
$(CL) $(CLFLAGS) -o ndis_events.exe ndis_events.cpp \
/link -nodefaultlib $(CLLIBS)
wpa_supplicant.exe: wpa_supplicant
mv -f $< $@
wpa_cli.exe: wpa_cli
mv -f $< $@
wpa_passphrase.exe: wpa_passphrase
mv -f $< $@
win_if_list.exe: win_if_list
mv -f $< $@
eapol_test.exe: eapol_test
mv -f $< $@
WINALL=wpa_supplicant.exe wpa_cli.exe wpa_passphrase.exe win_if_list.exe
windows-bin: $(WINALL)
$(STRIP) $(WINALL)
wpa_gui/Makefile:
qmake -o wpa_gui/Makefile wpa_gui/wpa_gui.pro
wpa_gui: wpa_gui/Makefile
$(MAKE) -C wpa_gui
TEST_SRC_MS_FUNCS = ms_funcs.c crypto.c sha1.c md5.c
test-ms_funcs: $(TEST_SRC_MS_FUNCS)
$(CC) -o test-ms_funcs -Wall -Werror $(TEST_SRC_MS_FUNCS) \
-DTEST_MAIN_MS_FUNCS -lcrypto -I../hostapd -I.
./test-ms_funcs
rm test-ms_funcs
TEST_SRC_SHA1 = sha1.c
test-sha1: $(TEST_SRC_SHA1)
$(CC) -o test-sha1 -Wall -Werror $(TEST_SRC_SHA1) \
-DTEST_MAIN -I../hostad -I.
./test-sha1
rm test-sha1
TEST_SRC_AES_WRAP = aes_wrap.c
test-aes_wrap: $(TEST_SRC_AES_WRAP)
$(CC) -o test-aes_wrap -Wall -Werror $(TEST_SRC_AES_WRAP) \
-DTEST_MAIN -I../hostad -I.
./test-aes_wrap
rm test-aes_wrap
TEST_SRC_EAP_SIM_COMMON = eap_sim_common.c sha1.c md5.c \
aes_wrap.c common.c
test-eap_sim_common: $(TEST_SRC_EAP_SIM_COMMON)
$(CC) -o test-eap_sim_common -Wall -Werror $(TEST_SRC_EAP_SIM_COMMON) \
-DTEST_MAIN_EAP_SIM_COMMON -I../hostapd -I.
./test-eap_sim_common
rm test-eap_sim_common
tests: test-ms_funcs test-sha1 test-aes_wrap test-eap_sim_common
clean:
rm -f core *~ *.o *.d $(ALL) $(WINALL)
%.eps: %.fig
fig2dev -L eps $*.fig $*.eps
%.png: %.fig
fig2dev -L png -m 3 $*.fig | pngtopnm | pnmscale 0.4 | pnmtopng \
> $*.png
docs-pics: doc/wpa_supplicant.png doc/wpa_supplicant.eps
docs: docs-pics
doxygen doc/doxygen.full
$(MAKE) -C doc/latex
cp doc/latex/refman.pdf wpa_supplicant-devel.pdf
docs-fast: docs-pics
doxygen doc/doxygen.fast
clean-docs:
rm -rf doc/latex doc/html
rm -f doc/wpa_supplicant.{eps,png} wpa_supplicant-devel.pdf
-include $(OBJS:%.o=%.d)
|
In case there's more information that can be gleaned from the driver sources, they can be downloaded from here: < Encore Linux driver for ENPWI-G2 >
Thanks for the help,
John
Posted by Juanito on Nov. 21 2007,03:54
Maybe < this post > on compiling modules would be useful. The second page of < this post > shows how to identify any modules that were created.
Posted by curaga on Nov. 21 2007,16:30
I'm pretty sure ieee80211_softmac requires a 2.6 kernel.. Not 100% though
|