i810 audio works with a nudge
Forum: HD Install
Topic: i810 audio works with a nudge
started by: Rupert
Posted by Rupert on Jan. 30 2006,23:05
Rather new to DSL but I like what I see. Congrats to all involved.
I've done a Grub-Frugal-Install of DSL 2.2rc1. It all worked well. After playing around with it for a day or so I noticed I didn't have any sound. Honestly, I didn't have the speakers powered on so I didn't think much about it.
Then I tried playing an mp3 file with xmms. I could see the slider bar marking time and the graphic bars jumping up and down but no sound came out. The volume knob was in the middle so I thought I should hear something. Yes... the speakers were on.
Bottom line... As soon as I move the volume knob, just a hair. I have sound. Xmms plays fine. If I close xmms and reopen it, I have sound right from the start. If I reboot the system, I have to go through the process of starting xmms and nudging the volume knob.
I've tried moving the dMix volume knobs to see if they do the same as xmms but they don't. I've tried running mpg123 at startup but that doesn't make any sound.
It's really more of an annoyance then a problem but if someone knows a solution, I'd be happier.
Here's some info from the System Stats:
| Code Sample |
i810 64036 1
agpgart 42660 7 (autoclean)
apm 9768 1 (autoclean)
mousedev 3832 0 (unused)
hid 22372 0 (unused)
input 3168 0 [mousedev hid]
af_packet 13544 0 (autoclean)
efs 7436 0 (autoclean)
hfs 76960 0 (autoclean)
minix 19848 0 (autoclean)
ntfs 50944 0 (autoclean)
xfs 493220 0 (autoclean)
reiserfs 169616 0 (autoclean)
ext3 64452 1 (autoclean)
jbd 46516 1 (autoclean) [ext3]
nls_iso8859-1 2844 1 (autoclean)
nls_cp437 4348 0 (autoclean)
i810_audio 25208 0
ac97_codec 11916 0 [i810_audio]
soundcore 3428 2 [i810_audio]
pcnet32 14948 1
mii 2240 0 [pcnet32]
crc32 2816 0 [pcnet32]
i810_rng 2660 0 (unused)
serial 52100 0 (autoclean)
ov511 68576 0
videodev 5600 1 [ov511]
pcmcia_core 39840 0
rtc 7036 0 (autoclean)
cloop 8740 2
ieee1394 183076 0
usb-storage 61696 0 (unused)
usb-uhci 21644 0 (unused)
usbcore 57600 1 [hid ov511 usb-storage usb-uhci]
ataraid 6180 0
ide-cd 28512 0
ide-scsi 8816 0
0000:00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller Hub] (rev 03)
0000:00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics Controller] (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02)
0000:01:0b.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 16)
0000:01:0e.0 Communication controller: Conexant HSF 56k Data/Fax Modem (rev 01)
.
.
.
Linux version 2.4.26 (root@Knoppix) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Sa Apr 17 19:33:42 CEST 2004
.
.
.
Kernel command line: root=/dev/hda3 quiet vga=normal noacpi noapm noscsi frugal dma mydsl=hda5 restore=hda5 home=hda5 opt=hda5 host=DSL22rc1
.
.
.
Intel 810 + AC97 Audio, version 0.24, 19:47:54 Apr 17 2004
PCI: Found IRQ 11 for device 00:1f.5
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH 82801AA found at IO 0x1840 and 0x2000, MEM 0x0000 and 0x0000, IRQ 11
i810_audio: Audio Controller supports 2 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: CRY52 (Cirrus Logic CS4299 rev D)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
Journalled Block Device driver loaded
.
.
.
LANG="C"
COUNTRY="us"
LANGUAGE="us"
CHARSET="iso8859-1"
KEYTABLE="us"
XKEYBOARD="us"
NETCARD_FULLNAME="Advanced Micro Devices [AMD]|79c970 [PCnet LANCE]"
NETCARD_DRIVER="pcnet32"
MOUSE_FULLNAME="Generic PS/2 Wheel Mouse"
MOUSE_DEVICE="/dev/psaux"
SOUND_FULLNAME="Intel Corporation|82801AA AC97 Audio"
SOUND_DRIVER="i810_audio"
XSERVER="XFree86"
XMODULE="i810"
XDESC="82810 CGC [Chipset Graphics Controller] (i810)"
FLOPPY_FULLNAME='3.5" 1.44MB floppy drive'
FLOPPY_DEVICE="/dev/fd0"
FLOPPY_DRIVER="unknown"
|
|