Netgear MA311: card recognized, but no connectionForum: Networking Topic: Netgear MA311: card recognized, but no connection started by: boehmerdaniel Posted by boehmerdaniel on Jan. 25 2006,16:07
Hello NG,some weeks ago I posted something about another wireless card and had found out soon that there is no hope that other cards will work. In your wiki was written that the Netgear MA311 would work. Therefor I bought one of them at eBay and just built it in. The card is recognized. I can set its properties via iwconfig. Unfortunately there is no connection coming up. AP still shows "44:44:44:...44". The Essid is saved correctly, but nothing else happens. I don't know what to do. Several website tell there is nothing more to do than build in and have fun:) Daniel Böhmer, Germany Posted by larkl on Jan. 25 2006,22:44
Well, here's what works with my MA311, I put this into /opt/bootlocal.sh. May or may not work for you:
I had VERY intermittent results until last week when I moved the iwconfig to BEFORE the pump. It's been working perfectly since then. I'm not sure that the iwpriv force reset really helps, tried it in desperation and haven't tried removing it. Hope this helps. Posted by boehmerdaniel on Jan. 26 2006,15:23
Okay, I got a connection and IP adress from DHCP now. Surfing the internet is no problem anymore.But, I have to say, this machine is going to be running as a router itself. I bought the card to use it in master mode. Typing "mode master" iwconfig tells me this wasn't supported. Don't tell me the cards driver doesn't understand master mode!! I relied to your wiki, where the card is listed as "working out of the box". I hope this was correct and is for master mode, too. Please give me hints. Posted by larkl on Jan. 28 2006,12:29
Not sure I can help much. There is some information on the Internet about using hostAP instead of the orinoco drivers in order to do this.< link1 > < link2 > |