Can't set chan # on Orinoco silver, DWL 650 cards.Forum: Networking Topic: Can't set chan # on Orinoco silver, DWL 650 cards. started by: teitoku Posted by teitoku on Aug. 04 2006,05:43
I've got a D-Link DWL 650 card that I know works under (puppy)linux, and a rebadged orinoco card sold as "Enterasys/Cabletron RoamAbout 802.11 DS" that I know works great in linux.The cards are detected correctly, as far as I can tell, and are set up as eth0 and eth1. Yet when I do "sudo iwconfig eth1 channel 6" or "sudo iwconfig eth0 freq 2.437G", it just comes back with Failed; Operation Not Supported. What's the fix? Posted by TimAllix on Aug. 04 2006,06:23
Hi, I just installed the same card, DWL 650, and used the DSL control panel to configure mine, very easy. Open DSL Control panel, click Wlanconfig button, and run throught the configuration - my card is identified as ath0, perhaps this is where you went wrong. After that, click the Iwconfig button, and enter your device (remember, ath0), SSID, channel and WEP parameters, and watch the lights on your card. They should begin blinking in unison. Having got this far, I am stuck with how to save the settings in Iwconfig, (see my post) if you know please let me know! Posted by teitoku on Aug. 04 2006,22:47
Mine is shown as eth1, and as I already said, I can't set the channel on the thing.You don't save iwconfig settings, you make or append a startup script to set them at boot time. Posted by teitoku on Aug. 20 2006,22:48
About every other time I turn the machine on, I can't get it online. It works half the time. Very annoying. Why do all the DSLpanel wireless config utilities come up with "Connection Failed" so often, and randomly? Is there no way to get this OS to work? |