wireless network card available and not availableForum: Networking Topic: wireless network card available and not available started by: bilbo_b Posted by bilbo_b on Oct. 10 2006,10:10
hello there...i have here a problem with my wireless network card get to work under dsl 3.01. the card is a netgear MA401 and is working with dsl 3.01. it is regognized by the system at startup correctly, but after some time the card "disappears" from the system. what going on ? i put in my cared to my laptop, then i start the laptop, the card is regognized by the kernelmodules, after the start of fluxbox the wmwave dockapp is loaded and i can see the card activated and good link signal... after a minute or so, the wmwave applet is not drawing any signal from the card, the whole applett is blank... the network cards led is blinking. when i start wlanconfig, wlanconfig means that it couldnt find any wireless network card. when i pull the card of from the slot and take it back again, wmwave draws some signal, wlanconfig finds the card and i can made the setup, but after a minute or so the card is dead again... what could be wrong ? BTW: the card has been working before with this dsl and the laptop, i have downloaded a fresh copy of firefox with it... Posted by roberts on Oct. 11 2006,06:29
The MA401 is a very reliable card with DSL.I use one on a regular basis. This would point to your hardware, perhaps an IRQ conflict. Check with dmesg | grep -i irq If so, try assigning via BIOS On the other hand it could possibly be a weak signal or interfernce. Posted by bilbo_b on Oct. 11 2006,06:38
i will try this this evening, when im back in my hotel (here on work i have only a stinking w2k workstation:-) )
|