Help needed with Siemens Gigaset PC Card 108
Forum: Networking
Topic: Help needed with Siemens Gigaset PC Card 108
started by: toshibacdt480
Posted by toshibacdt480 on Feb. 08 2007,22:31
I ever want to get familiar with linux and so i start a hd-install (syslinux via current bootdisk) on my good old toshiba satellite pro cdt480!
The last two days I've read on several boards and learned a lot, but I can't find an answer for my problem!
The Win-Driver (net5211.inf), which came with the card told me, that it should be an Atheros-Card:
| Code Sample |
[Version]
Signature = "$CHICAGO$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %ATHEROS%
Compatible = 1
DriverVer = 03/23/2005,3.3.2.15
Catalogfile = net5211.cat
[Manufacturer]
%ATHEROS% = Atheros
...
ATHER.DeviceDesc.0013 = "Gigaset PC Card 54"
ATHER.DeviceDesc108.0013 = "Gigaset PC Card 108"
ATHER.DeviceDesc.1041 = "Gigaset PC Card 54"
SIEMENS.DeviceDesc.1041 = "Gigaset PC Card 54"
|
If I believe what I've read in many topcs so should this Card be supported by madwifi, which is included in dsl.
But dmesg shows following messages (with or without pci=biosirq):
| Code Sample |
<4>PCI: No IRQ known for interrupt pin A of device 00:02.0.
<4>PCI: No IRQ known for interrupt pin A of device 00:02.1.
<4>PCI: No IRQ known for interrupt pin A of device 14:02.1.
<4>PCI: No IRQ known for interrupt pin A of device 14:02.1.
<4> wifi %d: request_irq failed
|
iwconfig shows only:
| Code Sample |
lo no wireless extensions
|
lspci -vv:
| Code Sample |
0000:14:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
Subsystem: Unknown device 02fa:3070
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParrErr- DEVSEL=medium > TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 10800000 (32-bit, non-prefetchable) [size=64k]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
|
My first trials with ndiswrapper (because siemens gigaset pc card 108 is not listet in "Verified Wireless Cards")
didn't really work too, even if "ndiswrapper -l" told me:
"driver installed, hardware present"! After "modporbe ndiswrapper" the power led went from blinking to lit constantly. But no device wlan0 was found!!!
May be the same reason in both cases i think, but what can Ido? I would be glad if someone give me a solution for the problem!
Many thanks in advance!
Posted by toshibacdt480 on Feb. 11 2007,16:35
In meantime I've found this on (< madwifi > < http://madwifi.org/wiki/Compatibility#GigasetPCCard108) >
| Code Sample |
Gigaset PC Card 108 ¶
Chipset: AR5212(a/b/g)
URL: http://gigaset.siemens.com/shc/0,1935,de_de_0_24400_rArNrNrNrN_prodId:88571,00.html
Interface: Cardbus Card
Antenna Connector: Unknown
Device Information: Unknown
Notes: Working fine with Debian Etch rc1, kernel 2.6.18-3-686, madwifi 0.9.2.1 built from source
|
But can tihs help me?
If the card works fine with this kernel would it work with dsl too? How can I proof the version of wifi used in may dsl-installation? May I have to update wifi? If yes, how?
|