Wireless how to
Forum: Networking
Topic: Wireless how to
started by: john712
Posted by john712 on Sep. 03 2007,13:52
These are the steps I took to get my linksys wireless WPC54GS notebook card working:This worked in DSL 3.2 and 4.0 (hard drive install) on a Toshiba Satellite 1695CDT notebook
1. Copy the windows drivers lsmvnds.inf and mrv8335xp.sys to the /dsl/home directory
2. Open terminal and sudo to superuser then run the following code
| Code Sample |
| ndiswrapper -i lsmvnds.inf |
3. Keep terminal open and run
| Code Sample |
| modprobe -r ndiswrapper |
4. Keep terminal open and run
| Code Sample |
| modprobe ndiswrapper |
5. Close terminal and from the DSL menu open System, Net Setup and ndiswrapper
6. Once the ndiswrapper setup window opens enter the following
Inf: /etc/ndiswrapper/lsmvnds/lsmvnds.inf
Device: wlan0
Sid: The name of your wireless router
Wep: The password for your wireless router if you gave it one
7. Click OK and give it a few seconds for the wireless card to initialize
To make life easier you could add two lines modprobe -r ndiswrapper and modprobe ndiswrapper to bootlocal.sh
I also modified /usr/local/bin/ndissetup to include the info in ndiswrapper setup window
This way each time I boot my DSL box I only have to open the ndiswrapper set window and click OK to initialize the wireless notebook card.
Life is good, but it's so much better with DSL
Posted by cflorea on Sep. 12 2007,01:56
hi!i am a newbie. has anyone figured out how to make WG311v3 wireless card to work with DSL?
(I am running DSL through a Frugal Install on a CF card; 500 MHz processor, 256MB RAM)
thank you.
-Cat
Posted by cflorea on Sep. 18 2007,00:16
Ok, so I got some ideas about installing the WG311v3 card on my machine. I plan to try the different drivers provided on Windows CD until maybe I find one that works with the "ndiswrapper".The trouble is when I try to uninstall the currently installed driver (which did not work)... it does not seem I can actually remove it!
Essentially, I run:
| Code Sample |
| sudo ndiswrapper -l |
and I get:
"Installed drivers:
wg311v3 invalid driver!"
Then I run:
| Code Sample |
| sudo ndiswrapper -e wg311v3 sudo ndiswrapper -l |
and I get
"No drivers installed".
It all seems okay but after I reboot, the command "sudo ndiswrapper -l" still gives me
"Installed drivers:
wg311v3 invalid driver!".
What is going in? Did I get rid of the current version of the driver or not? What reinstalls it?
Any help would be appreciated!
Thank you!
-Catalin
Posted by cflorea on Sep. 18 2007,01:25
okay, i went ahead and tried anyway to install a different driver.my command:
"sudo ndiswrapper -i /home/dsl/temp/wg311v3.inf"
resulted in:
"Installing wg311v3
couldn't copy /home/dsl/temp/wg311v3.inf at /usr/sbin/ndiswrapper line 139".
what does that mean??
are the rights messed up in the "temp" folder where i put the card driver files?
-Cat