Dynex USB 2.0 Notebook CardForum: Laptops Topic: Dynex USB 2.0 Notebook Card started by: lub997 Posted by lub997 on Sep. 24 2005,09:38
I bought a Dynex USB 2.0 Notebook Card (DX-UC202) at BestBuy and cannot get it to do anything on DSL. DSL seems to recognize it because when I do <<lsusb>> it shows that there are USB ports (but does not show anything attatched to them even when USB devices are plugged into it). I tried my Lexar JumpDrive in it about a month ago when I first got the Dynex card, and it not only didn't show up when I did <<lsusb>> but actually went as far as to delete everything on the JumpDrive and completely nuke the JumpDrive to the point that now even Windows XP computers no longer recognize it when I plug it in to a USB port. I plugged in my HP USB printer today to see if it would recognize that, but <<lsusb>> didn't even show it plugged in. What do I need to do to get this USB card working? According to <<lspci>> it uses the NEC Corporation USB 2.0 (rev 04) chipset. When I google search this chipset all I find is stuff about Apple laptops, which is not much help.<<lsusb>> Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 <<lspci>> 0000:00:0c.0 CardBus bridge: Texas Instruments PCI1131 (rev 01) 0000:00:0c.1 CardBus bridge: Texas Instruments PCI1131 (rev 01) 0000:00:0d.0 VGA compatible controller: S3 Inc. 86cM65 [Aurora64V+] (rev 43) 0000:00:0e.0 ISA bridge: Compaq Computer Corporation MIS-L (rev 04) 0000:00:0e.1 IDE interface: Compaq Computer Corporation Triflex Dual EIDE Controller (rev 03) 0000:02:00.0 USB Controller: NEC Corporation USB (rev 43) 0000:02:00.1 USB Controller: NEC Corporation USB (rev 43) 0000:02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04) <<lsmod>> Module Size Used by Not tainted apm 9736 1 (autoclean) cloop 8900 0 (unused) nls_iso8859-1 2844 0 (autoclean) nls_cp437 4348 0 (autoclean) serial 52068 0 (autoclean) ehci-hcd 16616 0 (unused) usb-ohci 18088 0 (unused) usbcore 57824 1 [ehci-hcd usb-ohci] ds 6536 2 yenta_socket 9504 2 pcmcia_core 39840 0 [ds yenta_socket] ide-cd 28704 0 ide-scsi 9040 0 rtc 7004 0 (autoclean) Posted by cbagger01 on Sep. 24 2005,21:30
NEC is a very common chipset for USB2.0In fact, most hardware geeks prefer NEC to the more troublesome VIA chipset for example. I have used a NEC USB2.0 addon PCI card (desktop PC, not laptop PC) with DSL and had no problems. The only thing that I needed to do was type sudo su modprobe ehci-hcd exit exit before I plugged in my USB drive and I got high speed connection. Otherwise, it still worked but I did not get the high speed, just the slower USB 1.1 speeds. Maybe you can find some more information by typing dmesg | more to see the bootup messages. Does using a different PCMCIA slot, or does ejecting and reinserting help? A Mepis Linux user has reported success with this card, so it is compatible with Linux. |