geomort
Group: Members
Posts: 14
Joined: Feb. 2007 |
 |
Posted: Jan. 13 2008,22:51 |
 |
mikshaw, you're right. There's not much in syslog. But redirecting dmesg output to a file did the trick. I can see the full boot sequence and it looks like the errors are coming from the card readers. I have included them if it is of interest. Best of all wireless is working with 4.2 and ndiswrapper. Don't no why it didn't work at first. Maybe I didn't mount the drive with the bcmwl5.inf files. I'll work on the machines with atheros chips next. They worked oob with 3.2.
Here is my dmesg.log
10
<4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
<4>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
<4>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
<6>PCI: Using ACPI for IRQ routing
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<4>allocated 32 pages and 32 bhs reserved for the highmem bounces
<5>VFS: Disk quotas vdquot_6.5.1
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8816000, size 3072k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
<6>vesafb: protected mode interface info at c000:d130
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>NFORCE-CK804: IDE controller at PCI slot 00:06.0
<6>NFORCE-CK804: chipset revision 162
<6>NFORCE-CK804: not 100% native mode: will probe irqs later
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>NFORCE-CK804: 00:06.0 (rev a2) UDMA133 controller
<6> ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: WDC WD2500JB-98REA0, ATA DISK drive
<4>hdc: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<4>hda: host protected area => 1
<6>hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
<6>Partition check:
<6> hda: hda1 hda2 hda3 hda4 < >
<4>ide: late registration of driver.
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>Initializing Cryptographic API
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 8192 buckets, 64Kbytes
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 836k freed
<4>EXT2-fs warning: checktime reached, running e2fsck is recommended
<4>VFS: Mounted root (ext2 filesystem).
<4>hdc: attached ide-scsi driver.
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: _NEC Model: DVD_RW ND-3520AW Rev: 3.05
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
<4>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.12
<7>libata version 1.10 loaded.
<7>sata_nv version 0.6
<7>PCI: Setting latency timer of device 00:07.0 to 64
<7>PCI: Setting latency timer of device 00:08.0 to 64
<6>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 11
<6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 11
<6>ata1: no device found (phy stat 00000000)
<6>ata2: no device found (phy stat 00000000)
<6>ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xB800 irq 10
<6>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xB808 irq 10
<7>ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
<6>ata3: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
<6>ata3: dev 0 configured for UDMA/133
<6>ata4: no device found (phy stat 00000000)
<6>scsi1 : sata_nv
<6>scsi2 : sata_nv
<6>scsi3 : sata_nv
<6>scsi4 : sata_nv
<4> Vendor: ATA Model: ST3250823AS Rev: 3.03
<4> Type: Direct-Access ANSI SCSI revision: 05
<4>Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
<4>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
<6> sda: sda1 sda2 < >
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<7>PCI: Setting latency timer of device 00:02.1 to 64
<6>ehci_hcd 00:02.1: PCI device 10de:005b (nVidia Corporation)
<6>ehci_hcd 00:02.1: irq 11, pci mem f8b41000
<6>usb.c: new USB bus registered, assigned bus number 1
<7>PCI: cache line size of 64 is not supported by device 00:02.1
<6>ehci_hcd 00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
<6>hub.c: USB hub found
<6>hub.c: 10 ports detected
<6>usb-uhci.c: $Revision: 1.275 $ time 14:05:13 Aug 18 2005
<6>usb-uhci.c: High bandwidth mode enabled
<6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
<7>PCI: Setting latency timer of device 00:02.0 to 64
<6>usb-ohci.c: USB OHCI at membase 0xf8b49000, IRQ 10
<6>usb-ohci.c: usb-00:02.0, PCI device 10de:005a (nVidia Corporation)
<6>usb.c: new USB bus registered, assigned bus number 2
<6>hub.c: USB hub found
<6>hub.c: 10 ports detected
<6>Initializing USB Mass Storage driver...
<6>usb.c: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>hub.c: new USB device 00:02.1-1, assigned address 2
<3>usb.c: USB device not accepting new address=2 (error=-71)
<6>hub.c: new USB device 00:02.1-1, assigned address 3
<3>usb.c: USB device not accepting new address=3 (error=-71)
<6>hub.c: new USB device 00:02.1-9, assigned address 4
<3>usb.c: USB device not accepting new address=4 (error=-71)
<6>hub.c: new USB device 00:02.1-9, assigned address 5
<3>usb.c: USB device not accepting new address=5 (error=-71)
<6>hub.c: new USB device 00:02.0-4, assigned address 2
<6>scsi5 : SCSI emulation for USB Mass Storage devices
<4> Vendor: Brother Model: MFC-620CN Rev: 1.00
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>Attached scsi removable disk sdb at scsi5, channel 0, id 0, lun 0
<5>sdb: Unit Not Ready, sense:
<4>Current 00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<4>sdb : READ CAPACITY failed.
<4>sdb : status = 1, message = 00, host = 0, driver = 08
<4>Current sd00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<4>sdb : block size assumed to be 512 bytes, disk size 1GB.
<6> sdb: I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> unable to read partition table
<7>WARNING: USB Mass Storage data integrity not assured
<7>USB Mass Storage device found at 2
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<7>ISO 9660 Extensions: RRIP_1991A
<4>cloop: Initializing cloop v2.01
<6>cloop: loaded (max 128 devices)
<4>cloop: /cdrom/KNOPPIX/KNOPPIX: 1819 blocks, 65536 bytes/block, largest block is 65552 bytes.
<7>ISO 9660 Extensions: RRIP_1991A
<6>Freeing unused kernel memory: 144k freed
<6>Real Time Clock Driver v1.10f
<6>ACPI: Power Button (FF) [PWRF]
<6>ACPI: Sleep Button (CM) [SLPB]
<6>ACPI: Fan [FAN] (on)
<6>ACPI: Processor [CPU0] (supports C1, 8 throttling states)
<6>ACPI: Thermal Zone [THRM] (24 C)
<6>Linux Kernel Card Services 3.1.22
<6> options: [pci] [cardbus] [pm]
<6>Intel ISA PCIC probe: not found.
<6>Databook TCIC-2 PCMCIA probe: not found.
<6>usb-uhci.c: $Revision: 1.275 $ time 11:56:04 Aug 29 2005
<6>usb-uhci.c: High bandwidth mode enabled
<6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
<4>usbdevfs: remount parameter error
<6>usb.c: registered new driver usblp
<6>printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0165
<6>printer.c: v0.13: USB Printer Device Class driver
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
<6>parport0: irq 7 detected
<6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
<7>PCI: Setting latency timer of device 00:0a.0 to 64
<6>eth0: forcedeth.c: subsystem: 0cb84:10de bound to 00:0a.0
<6>Intel 810 + AC97 Audio, version 1.01, 11:54:44 Aug 29 2005
<7>PCI: Setting latency timer of device 00:04.0 to 64
<6>i810: NVIDIA nForce Audio found at IO 0xec00 and 0xf000, MEM 0x0000 and 0x0000, IRQ 10
<6>i810_audio: Audio Controller supports 6 channels.
<6>i810_audio: Defaulting to base 2 channel mode.
<6>i810_audio: Resetting connection 0
<6>ac97_codec: AC97 codec, id: ALG144 (Unknown)
<4>i810_audio: only 48Khz playback available.
<4>i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 08:01.
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 08:01.
<5>NTFS driver v1.1.22 [Flags: R/W MODULE]
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 03:01.
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 03:01.
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 03:03.
<4>FAT: Did not find valid FSINFO signature.
<4>Found signature1 0x4e0005 signature2 0xd6e80000 sector=1.
<4>VFS: Can't find a valid FAT filesystem on dev 03:03.
<5>sdb: Unit Not Ready, sense:
<4>Current 00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<4>sdb : READ CAPACITY failed.
<4>sdb : status = 1, message = 00, host = 0, driver = 08
<4>Current sd00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<4>sdb : block size assumed to be 512 bytes, disk size 1GB.
<4>sdb: Write Protect is off
<6> sdb: I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> unable to read partition table
<6>Device not ready. Make sure there is a disc in the drive.
<4> I/O error: dev 08:10, sector 0
<6>Device not ready. Make sure there is a disc in the drive.
<4>eth0: no link during initialization.
<4>Registering unionfs 1.0.14
<5>sdb: Unit Not Ready, sense:
<4>Current 00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<4>sdb : READ CAPACITY failed.
<4>sdb : status = 1, message = 00, host = 0, driver = 08
<4>Current sd00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<4>sdb : block size assumed to be 512 bytes, disk size 1GB.
<4>sdb: Write Protect is off
<6> sdb: I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> unable to read partition table
<6>Device not ready. Make sure there is a disc in the drive.
<4> I/O error: dev 08:10, sector 2096896
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 16
<4> I/O error: dev 08:10, sector 128
<4> I/O error: dev 08:10, sector 144
<4> I/O error: dev 08:10, sector 128
<4> I/O error: dev 08:10, sector 128
<4> I/O error: dev 08:10, sector 16
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 80
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 16
<4> I/O error: dev 08:10, sector 32
<4> I/O error: dev 08:10, sector 16
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 8
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 8
<4> I/O error: dev 08:10, sector 8
<4> I/O error: dev 08:10, sector 24
<4> I/O error: dev 08:10, sector 24
<6>Device not ready. Make sure there is a disc in the drive.
<6>usb.c: registered new driver hiddev
<6>usb.c: registered new driver hid
<6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
<6>hid-core.c: USB HID support drivers
<6>mice: PS/2 mouse device common for all mice
<5>sdb: Unit Not Ready, sense:
<4>Current 00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<4>sdb : READ CAPACITY failed.
<4>sdb : status = 1, message = 00, host = 0, driver = 08
<4>Current sd00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<4>sdb : block size assumed to be 512 bytes, disk size 1GB.
<4>sdb: Write Protect is off
<6> sdb: I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> unable to read partition table
<6>Device not ready. Make sure there is a disc in the drive.
<4> I/O error: dev 08:10, sector 2096896
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 16
<4> I/O error: dev 08:10, sector 128
<4> I/O error: dev 08:10, sector 144
<4> I/O error: dev 08:10, sector 128
<4> I/O error: dev 08:10, sector 128
<4> I/O error: dev 08:10, sector 16
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 80
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 64
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 16
<4> I/O error: dev 08:10, sector 32
<4> I/O error: dev 08:10, sector 16
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 8
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 0
<4> I/O error: dev 08:10, sector 8
<4> I/O error: dev 08:10, sector 8
<4> I/O error: dev 08:10, sector 24
<4> I/O error: dev 08:10, sector 24
<6>Device not ready. Make sure there is a disc in the drive.
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
<5>apm: overridden by ACPI.
<6>ndiswrapper version 1.14 loaded (preempt=no,smp=yes)
<6>ndiswrapper: driver bcmwl5 (Linksys,07/17/2003, 3.30.15.0) loaded
<6>ndiswrapper: using irq 5
<6>wlan0: vendor: ''
<6>wlan0: ndiswrapper ethernet device 00:0c:41:63:f9:7f using driver bcmwl5, 14E4:4320.5.conf
<6>wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
I was thinking about putting some cards in the readers to see if it makes a differece. Looks like the device sdb is causing all the errors.
As you can see wlan0 is up and it works using WEP 128 at least.
DSL 4.2 looks good with the sata support.
Thanks,
|
.
DSL Market ,
Great VPS hosting provided by Tektonic
