Search Members Help

» Welcome Guest
[ Log In :: Register ]

Mini-ITX Boards Sale, Fanless BareBones Mini-ITX, Bootable 1G DSL USBs, 533MHz Fanless PC <-- SALE $200 each!
Get The Official Damn Small Linux Book. DSL Market , Great VPS hosting provided by Tektonic
 

[ Track this topic :: Email this topic :: Print this topic ]

reply to topic new topic new poll
Topic: No luck with HP PSC 1315 on DSL< Next Oldest | Next Newest >
b222b Offline





Group: Members
Posts: 6
Joined: Sep. 2005
Posted: Nov. 05 2005,10:21 QUOTE

I was able to configure the HP PSC 1315 printer (USB based) on several Linux distributions (Ubuntu, Gentoo, Slackware) using CUPS, but no luck with the printer on DSL at all. I did the whole configuration in the same way on each distribution and somehow I can print using these other distributions, but cannot print using DSL.

And I tried it on three different computers - no luck at all. I used HP-PSC_1310-hpijs.ppd each time - I put it in the folder with the other ppd files and included it as the driver. Everything works fine until printing the test page - then nothing happens. When I check the completed job, I get either the message that printing is completed - although it is not - or that it is aborted.

E.G., this is what I got in /var/logs/cups/error_log when I tried to print the test page and (when I saw that it did not print anything) restarted printing the same page:

I [05/Nov/2005:22:50:50 -0500] Job 1 queued on 'hppsc' by 'root'.
I [05/Nov/2005:22:50:50 -0500] Started filter /usr/lib/cups/filter/pstops (PID 1157) for job 1.
E [05/Nov/2005:22:50:50 -0500] PID 1158 stopped with status 22!
I [05/Nov/2005:22:50:50 -0500] Started filter /usr/lib/cups/filter/foomatic-rip (PID 1158) for job 1.
I [05/Nov/2005:22:50:50 -0500] Started backend /usr/lib/cups/backend/usb (PID 1159) for job 1.
I [05/Nov/2005:22:50:57 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1160)
I [05/Nov/2005:22:51:02 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=1161)
I [05/Nov/2005:22:51:27 -0500] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1162)
E [05/Nov/2005:22:51:27 -0500] restart_job: job #1 cannot be restarted - no files!

This is the description of the printer that CUPS gives:

HP PSC 1310 Foomatic/hpijs (recommended)  
Printer State: idle, accepting jobs.
Device URI: usb:/dev/usb/lp0

-----------------------------------------------------

So, I would really appreciate if anyone can tell me how I could enable printing or generally if they had any luck using this printer (or 1310) on DSL?

Regards
Back to top
Profile PM 
Your Fuzzy God Offline





Group: Members
Posts: 260
Joined: July 2005
Posted: Nov. 07 2005,17:41 QUOTE

Instead of using CUPS, have you tried apsfilter? (DSLPanel-->Printer Setup) (Tutorial)

The drivers for your printer are under section 12 "Official HP Deskjet Drivers" #83.

Good Luck,


--------------
Good Luck

-Fuzzy
www.mainframecomps.com
**Bienvienidos a la revolución**
Back to top
Profile PM WEB 
b222b Offline





Group: Members
Posts: 6
Joined: Sep. 2005
Posted: Nov. 07 2005,20:49 QUOTE

Thanks a lot for your response, I did try apsfilter, but it doesn't seem to provide me with the driver I need. The driver you suggested is for HP PhotoSmart 1315 (my printer is HP PSC 1315) - I tried it just now - just in case it might work - but it doesn't - it's a different printer. So, that's why I used CUPS, which provides the driver for my printer.

By the way, a couple of times I was starting DSL while my printer is on I got the following message during autoconfiguration:

insmod: insmod: a module named printer already exists
insmod: insmod: insmod/lib/modules/2.4.31/kernel/drivers/usb/printer.o failed
insmod: insmod: insmod printer failed

But most of the time I don't get that message even though the printer is on.

Not sure what's wrong...
???
Back to top
Profile PM 
2 replies since Nov. 05 2005,10:21 < Next Oldest | Next Newest >

[ Track this topic :: Email this topic :: Print this topic ]

 
reply to topic new topic new poll
Quick Reply: No luck with HP PSC 1315 on DSL

Do you wish to enable your signature for this post?
Do you wish to enable emoticons for this post?
Track this topic
View All Emoticons
View iB Code