albrandwood
Group: Members
Posts: 1
Joined: Aug. 2006 |
|
Posted: Aug. 15 2006,01:40 |
|
OK ...
Card is recognized during bootup and appears to be initialized with the relevent wireless settings ... (orinoco_cs etc)
The wireless configuration ... "iwconfig eth0" ... gives the correct data but "ifconfig" only mentions lo0 "ifconfig -a" shows it's there (as eth0) ... but with no IP address ...
If I eject the card, and re-insert it, then "ifconfig -a" shows a valid IP but indicates the connection is not UP ...
eth0 Link enap: Ethernet HWaddr xx:xx:xx:xx:xx:xx inet addr:192.168.3.55 BCast: 192.168.3.255 Mask:255.255.255.0 BROADCAST MULTICAST MTU:1500 Metric:1 ...... note the missing "UP" :-)
I can't seem to figure out how to get it to come UP ...
when I try "ifconfig eth0 up" I get: SIOCSIFFLAGS: Input/output error
from /var/log/messages: (edited to make up for the typing) daemon.info pumpd: starting at... daemon.debug pumpd: PUMP: sending discover daemon.debug pumpd: got dhcp offer daemon.debug pumpd: PUMP: sending second discover daemon.debug pumpd: PUMP: got an offer daemon.debug pumpd: PUMP: got lease daemon.debug pumpd: intf: device: eth0 daemon.debug pumpd: intf: set: 415 daemon.debug pumpd: intf: bootServer: 192.168.3.11 daemon.debug pumpd: intf: reqLease: 43200 daemon.debug pumpd: intf: ip: 192.168.3.55 daemon.debug pumpd: intf: next server: 0.0.0.0 daemon.debug pumpd: intf: netmask: 255.255.255.0 daemon.debug pumpd: intf: gateway: 192.168.3.1 daemon.debug pumpd: intf: dnsServers[0]:192.168.3.11 daemon.debug pumpd: intf: numDns: 1 daemon.debug pumpd: intf: domain: network.home daemon.debug pumpd: intf: broadcast: 192.168.3.255 daemon.debug pumpd: intf: network: 192.168.3.0 daemon.info pumpd: configured interface eth0 daemon.err pumpd: failed to set default route: Network is unreachable.
the logs appear to indicate that the wireless is working (else how would it get the DHCP configuration?)
I have no idea where to go from here ... ANYONE got any suggestions?
|