Laptops :: need Sound

I am using 2.1b on my older Toshiba Satellite Pro 480CDT with 233mmx and the Yamaha chip. I use the same string in my bootlocal.sh script as before and the sound is working fine.

i have now downloadad and installed the RC2.2 with the same problem.
if it possible that i type in the false command for my bios?
(im not so sure that the IRQ in the command is correctly)

here are my full bios setup:

Total=98304KB
Battery Save Mode=Full Power

Pointing Devices=Auto-Selected
Ext. Keyboard "FN"=Disabled
USB Legacy Emulation=Disabled
Parrallel Port Mode=ECP
Hard Disk Mode=Enhaced IDE(Normal)

Power on Display=Auto-Selected
LCD-Display Stretch=Disabled

Power-Up Mode=Boot
CPU Cache=Enabled
Level 2 Cache=Enabled
Auto Power On=Disabled
Alarm Volume=High
System Beep=Enabled

Device Config.=All Devices

Serial=COM1(3F8H/IRQ4)
Parallel=LPT1(378H/IRQ7/CH3)
Sound=Enabled

VGA Segment Adress=C000H
PCI BUS=IRQ11
Controller Mode=Auto-Selected
HDD=Primary IDE(1F0H/IRQ14)
FDD=(3F2H/IRQ6/CH2)
-------------------------------------

what is my sound IRQ? the IRQ 5?

You need to page down one page in the BIOS to see your sound card's info.

thats the ACPI BIOS V8.10
that have 2 pages (total)
and no more infos

i have written ALL my bios settings without:
bios-password
boot-priority (fdd->hdd at time)

my bios gives no more infos

oh my god *shame*
i have found more infos in the bios
i must go with the tab over the sound,
then opens an popup-window :-)

WSS i/o=530h
SBPro i/o=220h
Synth. i/o=388h
WSS & SBPro & MPU IRQ=IRQ5
WSS DMA=Ch 1
WSS 6 SBPro DMA=Ch 0
Control i/o=370h
MPU401 (Midi)=330h

Next Page...
original here.