Graphics error after boot menu, boot unsuccessful.

[Cactus2580]

Alright, here's the contents of my Xorg.conf.in file:

Section "ServerFlags"
    Option "DontZap" "Off"
    Option "AllowMouseOpenFail" "true"
    Option "blank time" "0"
    Option "standby time" "0"
    Option "suspend time" "0"
    Option "off time" "0"
EndSection
 
Section "InputClass"
    Identifier "middle button emulation class"
    MatchIsPointer "on"
    #Option "Emulate3Buttons" "on"
    #Option "Emulate3Timeout" "50"
EndSection
 
Section "InputDevice"
    Identifier "Touchpad"
    Driver "synaptics"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "VertScrollDelta" "100"
    Option "HorizScrollDelta" "0"
    Option "MinSpeed" "0.09"
    Option "MaxSpeed" "0.18"
    Option "AccelFactor" "0.0015"
    Option "SHMConfig" "on"
EndSection
 
Section "InputDevice"
    Driver "synaptics"
    Identifier "ALPS Touchpad"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "event"
    Option "LeftEdge" "130"
    Option "RightEdge" "840"
    Option "TopEdge" "130"
    Option "BottomEdge" "640"
    Option "FingerLow" "7"
    Option "FingerHigh" "8"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "110"
    Option "EmulateMidButtonTime" "75"
    Option "VertScrollDelta" "20"
    Option "HorizScrollDelta" "0"
    Option "MinSpeed" "0.25"
    Option "MaxSpeed" "0.50"
    Option "AccelFactor" "0.030"
    Option "EdgeMotionMinSpeed" "200"
    Option "EdgeMotionMaxSpeed" "200"
    Option "UpDownScrolling" "1"
    Option "CircularScrolling" "1"
    Option "CircScrollDelta" "0.1"
    Option "CircScrollTrigger" "2"
    Option "SHMConfig" "on"
EndSection
 
Section "InputDevice"
    Identifier "Appletouch"
    Driver "synaptics"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "100"
    Option "RightEdge" "1120"
    Option "TopEdge" "50"
    Option "BottomEdge" "310"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapMove" "220"
    Option "TapButton1" "1"
    Option "TapButton2" "3"
    Option "TapButton3" "2"
    Option "MinSpeed" "0.79"
    Option "MaxSpeed" "0.88"
    Option "AccelFactor" "0.0015"
    Option "SHMConfig" "on"
EndSection
 
Section "Monitor"
    Identifier "Monitor0"
    VendorName "unknown"
    ModelName "unknown"
    Option "DPMS" "true"
    HorizSync    30-75
    VertRefresh  55-70
EndSection
 
Section "Device"
    Identifier  "Card0"
    Driver "@@XMODULE@@"
    BoardName "unknown"
 
    Screen 0
  #Option "UseDisplayDevice" "dfp"
  #Option "MonitorLayout" "crt,crt"
  #BusID  "PCI:1:0:0"
  #Option "sw_cursor" # needed for some ati cards
  #Option "hw_cursor"
  #Option "NoAccel"
  #Option "ShowCache"
  #Option "ShadowFB"
  #Option "UseFBDev"
  #Option "Rotate"
    Option "UseInternalAGPGART" "no"
 
    Option "XAANoOffscreenPixmaps" "true"
 
# savage special options, use with care
  #Option "NoUseBios"
  #Option "BusType" "PCI"
    Option "DmaMode" "None"
 
# nvidia special options, use with care
    Option "CursorShadow" "1"
    Option "CursorShadowAlpha" "63"
    Option "CursorShadowYOffset" "2"
    Option "CursorShadowXOffset" "4"
    Option "FlatPanelProperties" "Scaling = native"
    Option "NoLogo" "true"
    Option "UseEDID" "true"
    Option "AddARGBGLXVisuals" "true"
    Option "RenderAccel" "true"
  #Option "AllowGLXWithComposite" "true"
EndSection
 
Section "Device"
    Identifier  "Card1"
    Driver "@@XMODULE@@"
    BoardName "unknown"
 
    Screen 1
  #Option "MonitorLayout" "crt,crt"
  #BusID  "PCI:1:0:0"
EndSection
 
Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
   
    SubSection "Display"
    Depth 8
    @@MODES@@
    EndSubSection
    SubSection "Display"
    Depth 15
    @@MODES@@
    EndSubSection
    SubSection "Display"
    Depth 16
    @@MODES@@
    EndSubSection
    SubSection "Display"
    Depth 24
    @@MODES@@
    EndSubSection
    SubSection "Display"
    Depth 32
    @@MODES@@
    EndSubSection
   
    # Only the official NVIDIA driver supports twinview
    # these setting are an example
    Option "TwinView" "false"
    Option "SecondMonitorVendorName" "unknown"
    Option "SecondMonitorModelName" "unknown"
    Option "SecondMonitorHorizSync" "30-75"
    Option "SecondMonitorVertRefresh" "55-70"
  #Option "MetaModes" "1024x768, 1024x768"
    Option "TwinViewOrientation" "RightOf"
    Option "ConnectedMonitor" "dfp,dfp"
EndSection
 
Section "DRI"
    Mode 0666
EndSection
 
Section "Extensions"
    Option "Composite" "Enable"
EndSection

Unsure if also necessary, but here is my Xsession.options as well:

# $Id: Xsession.options 189 2005-06-11 00:04:27Z branden $
#
# configuration options for /etc/X11/Xsession
# See Xsession.options(5) for an explanation of the available options.
allow-failsafe
allow-user-resources
allow-user-xsession
use-ssh-agent
use-session-dbus

So, with these bits of information, can we figure this out? After using XFCE4 on the hardware within AntiX23.2 with success, I am optimistic.

Thanks again for your time!

EDIT:

Did some basic visual comparison of the xorg.conf.in files between DSL2024.R7 and the AntiX23.2-runit-core which is successfully running XFCE4, do not see much difference at all. Confused as to why this would be, did the Xorg package that I installed have drivers included which are not included within the DSL2024 Radeon package? Why won't DSL auto-configure into running the same way that the installed Xorg package from AntiX base repo will?