WiFi

[AZgl1800]

https://www.antixforum.com/forums/topic/...ost-160682
https://www.antixforum.com/forums/topic/...ard-i-try/

Is this a HD install?  If so, (and no luck above), turn on firewall (control center->network->toggle fw), connect with phone (cable) usb tether, do the DSL File Restore, update & upgrade (sudo /usr/local/bin/cli-aptiX).  If nothing changed, we'll keep at it, but that should happen anyway. 

Welcome.

Yes, I let it wipe out the entire drive, the install was via Ventoy and the DSL.iso
every thing seems work good, except it will NOT accept my WiFi password where it says "Passphrase"

I would assume, that Passphrase, is the same as my WiFi channel Password ??

Conman immediatel errors out, "not valid"

I just this minute saw your Post, and will try your Recommendations.

I just finished reading the PDF, and I have already done what is suggested to do there.
the PDF says that all I need do is enter the 'password' and it should work, but for me, it does not.

this is the REF-1 of the PDF
________________________________________________________________________________
> Check all boxes marked with a red arrow
> Click on the tab [Wireless]
> [ref1] (1) Select the SSID (Network name) of your Access
Point (WiFi transceiver) that you want to connect with
In this example “ASUS-GT-BE98” is the SSID of the
WiFi transceiver in the router/modem
> (2) Click the [Edit] button
> (3) Type the WPA2/WPA3 WiFi password in the
“Passphrase” field
> (4) Click [OK]
The WiFi password is now registered “behind”
the SSID “ASUS-GT-BE98”.
The WIFi password will not be kept (remembered)
across a reboot (restart) of your computer, when
you booted antiX from DVD, USB-stick or an ISO file
(Ventoy boot loader)
The WiFi password will be kept when you booted
from an antiX installation that is installed on HDD/
===============
DSL is installed on the Aspire One, it is not running on a stick or DVD.

so it should have accepted the password.

Comments???

---

https://www.antixforum.com/forums/topic/...ost-160682
https://www.antixforum.com/forums/topic/...ard-i-try/

Is this a HD install?  If so, (and no luck above), turn on firewall (control center->network->toggle fw), connect with phone (cable) usb tether, do the DSL File Restore, update & upgrade (sudo /usr/local/bin/cli-aptiX).  If nothing changed, we'll keep at it, but that should happen anyway. 

Welcome.

Yes, I let it wipe out the entire drive, the install was via Ventoy and the DSL.iso
every thing seems work good, except it will NOT accept my WiFi password where it says "Passphrase"

I would assume, that Passphrase, is the same as my WiFi channel Password ??

Conman immediatel errors out, "not valid"

I just this minute saw your Post, and will try your Recommendations.

I just finished reading the PDF, and I have already done what is suggested to do there.
the PDF says that all I need do is enter the 'password' and it should work, but for me, it does not.

this is the REF-1 of the PDF
________________________________________________________________________________
> Check all boxes marked with a red arrow
> Click on the tab [Wireless]
> [ref1] (1) Select the SSID (Network name) of your Access
Point (WiFi transceiver) that you want to connect with
In this example “ASUS-GT-BE98” is the SSID of the
WiFi transceiver in the router/modem
> (2) Click the [Edit] button
> (3) Type the WPA2/WPA3 WiFi password in the
“Passphrase” field
> (4) Click [OK]
The WiFi password is now registered “behind”
the SSID “ASUS-GT-BE98”.
The WIFi password will not be kept (remembered)
across a reboot (restart) of your computer, when
you booted antiX from DVD, USB-stick or an ISO file
(Ventoy boot loader)
The WiFi password will be kept when you booted
from an antiX installation that is installed on HDD/
===============
DSL is installed on the Aspire One, it is not running on a stick or DVD.

so it should have accepted the password.

Comments???    

I have attached the Conman Agent error

I also turned the Firewall OFF...