vees
Group: Members
Posts: 81
Joined: Nov. 2005 |
|
Posted: June 25 2006,15:06 |
|
i did. the same stuff happened. but when I tried 3.0.1 on my desktop the problem did not occur.
so something was changed between 2.4 and 3.0 and 3.0.1 which not related to unionfs which created the problem on my laptop. Any idea as to what that might be?
VS
PS: here is below the output of hwinfo on my laptop (I apologize for the length)
============ start debug info ============ libhd version 8.38 (ia32) kernel version is 2.6 ----- /proc/cmdline ----- ACPI on - DMA on - English vga=0x317 screen=1024x768 splash ramdisk_size=100000 init=/etc/init lang=us apm=power-off nomce quiet 2 ----- /proc/cmdline end ----- debug = 0xff7ffff7 probe = 0x138fe4be17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum +manual +fb +veth +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs +s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -max -lxrc +dsl) shm: attached segment 32768 at 0xb7de3000 >> floppy.1: get nvram >> floppy.2: klog info >> bios.1: cmdline >> bios.1.1: apm >> bios.2: ram bios: 1 disks bios: EBDA 0x00c00 bytes at 0x9f400 >> bios.2: rom >> bios.3: smp ----- BIOS data 0x00400 - 0x004ff ----- 400 f8 03 00 00 00 00 00 00 78 03 00 00 00 00 40 9f "........x.....@." 410 27 42 00 7d 02 28 00 00 00 00 24 00 24 00 e0 50 "'B.}.(....$.$..P" 420 32 03 0d 1c 00 00 00 00 00 00 00 00 00 00 00 00 "2..............." 430 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 "................" 440 16 00 03 42 00 00 00 a0 ef 76 80 00 00 a0 00 00 "...B.....v......" 450 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 460 00 00 00 d4 03 29 30 7f 03 00 c0 00 cf e0 0a 00 ".....)0........." 470 00 00 00 00 01 01 00 00 14 14 14 00 01 01 01 01 "................" 480 1e 00 3e 00 2f 10 00 60 f9 11 0b 81 50 00 00 04 "..>./..`....P..." 490 04 00 00 00 00 00 10 10 00 00 00 00 00 00 00 00 "................" 4a0 00 00 00 00 00 00 00 00 23 17 00 c0 00 00 00 00 "........#......." 4b0 00 00 00 00 00 00 d0 19 00 00 00 00 00 00 00 00 "................" 4c0 00 04 00 01 00 08 70 01 76 03 a0 00 0f 00 00 00 "......p.v......." 4d0 70 01 00 00 10 e7 84 00 c8 00 00 00 00 00 00 00 "p..............." 4e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" ----- BIOS data end ----- ----- EBDA 0x9f400 - 0x9ffff ----- ===>>>I REMOVED THIS DATA TO SHORTEN THE POST<<<=== ----- EBDA end ----- >> bios.4: vbe >> bios.4.1: vbe info >> bios.5: 32 bios32: valid SD header at 0xf71f0 (size 0x10, rev 0), SD at 0xfd890 >> sys.1: cpu vmware check: 0 >> misc.9: kernel log ----- kernel log ----- <6>io scheduler deadline registered <6>io scheduler cfq registered <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>PIIX4: IDE controller at PCI slot 0000:00:07.1 <6>PIIX4: chipset revision 1 <6>PIIX4: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0x1090-0x1097, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0x1098-0x109f, BIOS settings: hdc:DMA, hdd:pio <7>Probing IDE interface ide0... <4>hda: TOSHIBA MK1214GAP, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <7>Probing IDE interface ide1... <4>hdc: TOSHIBA DVD-ROM SD-C2302, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: max request size: 128KiB <6>hda: 23579136 sectors (12072 MB), CHS=23392/16/63, UDMA(33) <6>hda: cache flushes not supported <6> hda: hda1 hda2 < hda5 hda6 > <6>hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <4>3ware Storage Controller device driver for Linux v1.26.02.001. <4>3ware 9000 Storage Controller device driver for Linux v2.26.02.004. <7>libata version 1.12 loaded. <6>mice: PS/2 mouse device common for all mice <6>md: linear personality registered as nr 1 <6>md: raid0 personality registered as nr 2 <6>md: raid1 personality registered as nr 3 <6>md: raid10 personality registered as nr 9 <6>md: raid5 personality registered as nr 4 <6>raid5: automatically using best checksumming function: pIII_sse <4> pIII_sse : 888.000 MB/sec <4>raid5: using function: pIII_sse (888.000 MB/sec) <4>raid6: int32x1 137 MB/s <4>raid6: int32x2 144 MB/s <4>raid6: int32x4 120 MB/s <4>raid6: int32x8 111 MB/s <4>raid6: mmxx1 363 MB/s <4>raid6: mmxx2 495 MB/s <4>raid6: sse1x1 349 MB/s <4>raid6: sse1x2 486 MB/s <4>raid6: using algorithm sse1x2 (486 MB/s) <6>md: raid6 personality registered as nr 8 <6>md: multipath personality registered as nr 7 <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 3.39 <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com <6>device-mapper: dm-multipath version 1.0.4 loaded <6>device-mapper: dm-round-robin version 1.0.0 loaded <6>device-mapper: dm-emc version 0.0.3 loaded <6>EISA: Probing bus 0 at eisa.0 <4>Cannot allocate resource for EISA slot 1 <4>Cannot allocate resource for EISA slot 2 <4>Cannot allocate resource for EISA slot 3 <6>EISA: Detected 0 cards. <6>NET: Registered protocol family 2 <6>input: AT Translated Set 2 keyboard on isa0060/serio0 <4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes) <4>TCP established hash table entries: 8192 (order: 3, 32768 bytes) <4>TCP bind hash table entries: 8192 (order: 3, 32768 bytes) <6>TCP: Hash tables configured (established 8192 bind 8192) <6>TCP reno registered <6>NET: Registered protocol family 1 <4>Using IPI Shortcut mode <4>ACPI wakeup devices: <4> LID COM1 MDM1 PWRB <6>ACPI: (supports S0 S1 S3 S4 S5) <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <5>RAMDISK: Compressed image found at block 0 <4>VFS: Mounted root (ext2 filesystem). <6>NTFS driver 2.1.25 [Flags: R/W MODULE]. <7>ISO 9660 Extensions: Microsoft Joliet Level 3 <7>ISO 9660 Extensions: RRIP_1991A <6>Freeing unused kernel memory: 272k freed <6>Synaptics Touchpad, model: 1, fw: 4.3, id: 0x8858a1, caps: 0x0/0x0 <6>input: SynPS/2 Synaptics TouchPad on isa0060/serio1 <6>input: PC Speaker <6>Linux agpgart interface v0.101 © Dave Jones <6>agpgart: Detected an Intel 440BX Chipset. <6>agpgart: AGP aperture is 64M @ 0xe0000000 <6>parport: PnPBIOS parport detected. <6>parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA] <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <3>shpchp: shpc_init : shpc_cap_offset == 0 <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 <6>Yenta: CardBus bridge found at 0000:00:04.0 [14c0:0007] <6>Yenta: Enabling burst memory read transactions <6>Yenta: Using CSCINT to route CSC interrupts to PCI <6>Yenta: Routing CardBus interrupts to PCI <6>Yenta TI: socket 0000:00:04.0, mfunc 0x01021c72, devctl 0x66 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled <6>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>Yenta: ISA IRQ mask 0x0438, PCI irq 11 <6>Socket status: 30000006 <6>ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 <6>Yenta: CardBus bridge found at 0000:00:04.1 [14c0:0007] <6>Yenta: Using CSCINT to route CSC interrupts to PCI <6>Yenta: Routing CardBus interrupts to PCI <6>Yenta TI: socket 0000:00:04.1, mfunc 0x01021c72, devctl 0x66 <6>Yenta: ISA IRQ mask 0x0438, PCI irq 11 <6>Socket status: 30000006 <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <6>USB Universal Host Controller Interface driver v2.3 <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 <4>PCI: setting IRQ 5 as level-triggered <6>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 <6>uhci_hcd 0000:00:07.2: UHCI Host Controller <6>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:07.2: irq 5, io base 0x00001060 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device <6>usb 1-1: new full speed USB device using uhci_hcd and address 2 <4>ltmodem: module license 'Proprietary' taints kernel. <6>Loading Lucent Modem Controller driver version 8.26-alk-8 <6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 <6>Detected Parameters Irq=5 BaseAddress=0x1800 ComAddress=0x1080 <6>ttyLTM0 at I/O 0x1800 (irq = 5) is a Lucent/Agere Modem <6>Initializing USB Mass Storage driver... <6>scsi0 : SCSI emulation for USB Mass Storage devices <6>usbcore: registered new driver usb-storage <6>USB Mass Storage support registered. <7>usb-storage: device found at 2 <7>usb-storage: waiting for device to settle before scanning <6>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 <6>es1968: clocking to 48000 <6>Capability LSM initialized <5> Vendor: Pretec Model: 512MB Gini Rev: 1.10 <5> Type: Direct-Access ANSI SCSI revision: 02 <5>SCSI device sda: 975744 512-byte hdwr sectors (500 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 00 00 00 <3>sda: assuming drive cache: write through <5>SCSI device sda: 975744 512-byte hdwr sectors (500 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 00 00 00 <3>sda: assuming drive cache: write through <6> sda: <5>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 <5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 <7>usb-storage: device scan complete <6>ACPI: AC Adapter [AC] (off-line) <6>ACPI: Battery Slot [BAT0] (battery present) <6>ACPI: Battery Slot [BAT1] (battery absent) <6>ACPI: Lid Switch [LID] <6>ACPI: Power Button (CM) [PWRB] <6>ACPI: Sleep Button (CM) [SBTN] <6>ACPI: Fan [FAN] (off) <4>Using specific hotkey driver <6>ACPI: CPU0 (power states: C1[C1] C2[C2]) <6>ACPI: Processor [CPU0] (supports 8 throttling states) <6>ACPI: Thermal Zone [THRM] (33 C) <6>pcmcia: Detected deprecated PCMCIA ioctl usage. <6>pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. <6>pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. <6>cs: IO port probe 0x100-0x4ff: clean. <6>cs: IO port probe 0x100-0x4ff: clean. <6>cs: IO port probe 0xc00-0xcff: clean. <6>cs: IO port probe 0xc00-0xcff: clean. <6>cs: IO port probe 0x3000-0x7fff: clean. <6>cs: IO port probe 0x3000-0x7fff: clean. <6>cs: IO port probe 0xa00-0xaff: clean. <6>cs: IO port probe 0xa00-0xaff: clean. <4>fuse init (API version 7.2) <6>Adding 408200k swap on /dev/hda5. Priority:-1 extents:1 across:408200k ----- kernel log end ----- >> misc.1: misc data >> misc.1.1: open serial >> misc.1.2: open parallel ----- exec: "/sbin/rmmod parport_pc" ----- ----- return code: ? ----- ----- exec: "/sbin/rmmod parport" ----- ----- return code: ? ----- ----- exec: "/sbin/modprobe parport " ----- ----- return code: ? ----- ----- exec: "/sbin/modprobe parport_pc io=0x378 irq=none,none,none" ----- ----- return code: ? ----- >> misc.1.3: read floppy read_block0: open(/dev/fd0) failed >> misc.2.1: io >> misc.2.2: dma >> misc.2.3: irq ----- /proc/ioports ----- 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vesafb 03f2-03f5 : floppy 03f6-03f6 : ide0 03f7-03f7 : floppy DIR 03f8-03ff : serial 04d0-04d1 : pnp 00:05 0cf8-0cff : PCI conf1 1000-103f : 0000:00:07.3 1000-1003 : PM1a_EVT_BLK 1004-1005 : PM1a_CNT_BLK 1008-100b : PM_TMR 100c-100f : GPE0_BLK 1010-1015 : ACPI CPU throttle 1016-103f : motherboard 1016-103f : pnp 00:05 1040-105f : 0000:00:07.3 1040-104f : motherboard 1040-104f : pnp 00:05 1040-1047 : piix4-smbus 1060-107f : 0000:00:07.2 1060-107f : uhci_hcd 1080-1087 : 0000:00:10.0 1090-109f : 0000:00:07.1 1090-1097 : ide0 1098-109f : ide1 1400-14ff : 0000:00:08.0 1400-14ff : ESS Maestro 1800-18ff : 0000:00:10.0 1c00-1cff : PCI CardBus #02 2000-2fff : PCI Bus #01 2000-20ff : 0000:01:00.0 3000-30ff : PCI CardBus #02 3400-34ff : PCI CardBus #06 3810-381f : motherboard 3810-381f : pnp 00:05 3c00-3cff : PCI CardBus #06 ----- /proc/ioports end ----- ----- /proc/interrupts ----- 0: 32159 XT-PIC timer 1: 290 XT-PIC i8042 2: 0 XT-PIC cascade 4: 8 XT-PIC serial 5: 633 XT-PIC uhci_hcd:usb1, ltserial, ESS Maestro 6: 8 XT-PIC floppy 8: 1 XT-PIC rtc 9: 42 XT-PIC acpi 11: 2 XT-PIC yenta, yenta 12: 110 XT-PIC i8042 14: 73 XT-PIC ide0 15: 774 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 ----- /proc/interrupts end ----- ----- /proc/dma ----- 2: floppy 4: cascade ----- /proc/dma end ----- >> misc.3: FPU >> misc.3.1: DMA >> misc.3.2: PIC >> misc.3.3: timer >> misc.3.4: RTC >> cpu.1: cpuinfo ----- /proc/cpuinfo ----- processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 1 cpu MHz : 448.092 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 897.11 ----- /proc/cpuinfo end ----- >> memory.1: main memory size kcore mem: 0xbff0000 klog mem 0: 0x0 klog mem 1: 0x0 klog mem: 0x0 bios mem: 0x0 meminfo: 0x0 >> pci.1: sysfs drivers ----- sysfs driver list (id 0xf3d132a9db0da4c0) ----- ide-cdrom: /devices/pci0000:00/0000:00:07.1/ide1/1.0 ide-disk: /devices/pci0000:00/0000:00:07.1/ide0/0.0 ES1968 (ESS Maestro): /devices/pci0000:00/0000:00:08.0 ES1968 (ESS Maestro): /module/snd_es1968 PIIX_IDE: /devices/pci0000:00/0000:00:07.1 agpgart-intel: /devices/pci0000:00/0000:00:00.0 piix4_smbus: /devices/pci0000:00/0000:00:07.3 uhci_hcd: /devices/pci0000:00/0000:00:07.2 yenta_cardbus: /devices/pci0000:00/0000:00:04.0 yenta_cardbus: /devices/pci0000:00/0000:00:04.1 i8042: /devices/platform/i8042 serial8250: /devices/platform/serial8250 vesafb: /devices/platform/vesafb.0 i8042 aux: /devices/pnp0/00:0b i8042 kbd: /devices/pnp0/00:0a serial: /devices/pnp0/00:04 system: /devices/pnp0/00:00 system: /devices/pnp0/00:05 sd: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0 atkbd: /devices/platform/i8042/serio1 psmouse: /devices/platform/i8042/serio0 hub: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0 hub: /module/usbcore usb-storage: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0 usb-storage: /module/usb_storage usb: /devices/pci0000:00/0000:00:07.2/usb1/1-1 usb: /devices/pci0000:00/0000:00:07.2/usb1 usb: /module/usbcore usbfs: /module/usbcore ----- sysfs driver list end ----- >> pci.2: get sysfs pci data pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci path = /devices/pci0000:00/0000:00:00.0 class = 0x60000 vendor = 0x8086 device = 0x7190 subvendor = 0x0 subdevice = 0x0 irq = 0 res[0] = 0xe0000000 0xe3ffffff 0x1208 config[64] pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci path = /devices/pci0000:00/0000:00:01.0 class = 0x60400 vendor = 0x8086 device = 0x7191 subvendor = 0x0 subdevice = 0x0 irq = 0 config[64] pci device: name = 0000:00:04.0, bus_id = 0000:00:04.0, bus = pci path = /devices/pci0000:00/0000:00:04.0 class = 0x60700 vendor = 0x104c device = 0xac1c subvendor = 0x14c0 subdevice = 0x7 irq = 11 res[0] = 0x18100000 0x18100fff 0x200 config[64] pci device: name = 0000:00:04.1, bus_id = 0000:00:04.1, bus = pci path = /devices/pci0000:00/0000:00:04.1 class = 0x60700 vendor = 0x104c device = 0xac1c subvendor = 0x14c0 subdevice = 0x7 irq = 11 res[0] = 0x18101000 0x18101fff 0x200 config[64] pci device: name = 0000:00:07.0, bus_id = 0000:00:07.0, bus = pci path = /devices/pci0000:00/0000:00:07.0 class = 0x68000 vendor = 0x8086 device = 0x7110 subvendor = 0x0 subdevice = 0x0 irq = 0 config[64] pci device: name = 0000:00:07.1, bus_id = 0000:00:07.1, bus = pci path = /devices/pci0000:00/0000:00:07.1 class = 0x10180 vendor = 0x8086 device = 0x7111 subvendor = 0x0 subdevice = 0x0 irq = 0 res[4] = 0x1090 0x109f 0x101 config[64] pci device: name = 0000:00:07.2, bus_id = 0000:00:07.2, bus = pci path = /devices/pci0000:00/0000:00:07.2 class = 0xc0300 vendor = 0x8086 device = 0x7112 subvendor = 0x0 subdevice = 0x0 irq = 5 res[4] = 0x1060 0x107f 0x101 config[64] pci device: name = 0000:00:07.3, bus_id = 0000:00:07.3, bus = pci path = /devices/pci0000:00/0000:00:07.3 class = 0x68000 vendor = 0x8086 device = 0x7113 subvendor = 0x0 subdevice = 0x0 irq = 9 config[64] pci device: name = 0000:00:08.0, bus_id = 0000:00:08.0, bus = pci path = /devices/pci0000:00/0000:00:08.0 class = 0x40100 vendor = 0x125d device = 0x1978 subvendor = 0x14c0 subdevice = 0x7 irq = 5 res[0] = 0x1400 0x14ff 0x101 config[64] pci device: name = 0000:00:10.0, bus_id = 0000:00:10.0, bus = pci path = /devices/pci0000:00/0000:00:10.0 class = 0x78000 vendor = 0x11c1 device = 0x449 subvendor = 0x1468 subdevice = 0x440 irq = 5 res[0] = 0xfc000000 0xfc0000ff 0x200 res[1] = 0x1080 0x1087 0x101 res[2] = 0x1800 0x18ff 0x101 config[64] pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0 class = 0x30000 vendor = 0x1002 device = 0x4c4d subvendor = 0x14c0 subdevice = 0x7 irq = 11 res[0] = 0xfd000000 0xfdffffff 0x200 res[1] = 0x2000 0x20ff 0x101 res[2] = 0xfc100000 0xfc100fff 0x200 res[6] = 0x18000000 0x1801ffff 0x7202 config[64] ---------- PCI raw data ---------- bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:7190:0000:0000:03 class 06, sub_class 00 prog_if 00, hdr 0, flags <agp>, irq 0 addr0 e0000000, size 04000000 00: 86 80 90 71 06 01 10 22 03 00 00 06 00 40 00 00 "...q...".....@.." 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 "................" 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" a0: 02 00 ".."
bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 8086:7191:0000:0000:03 class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0 00: 86 80 91 71 1f 00 20 02 03 00 04 06 00 80 01 00 "...q.. ........." 10: 00 00 00 00 00 00 00 00 00 01 01 40 20 20 a0 22 "...........@ ."" 20: 10 fc f0 fd 00 18 00 18 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00 "................"
bus 00->02, slot 04, func 0, vend:dev:s_vend:s_dev:rev 104c:ac1c:14c0:0007:01 class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 11 addr0 18100000, size 00001000 00: 4c 10 1c ac 07 00 10 02 01 00 07 06 20 a8 82 00 "L........... ..." 10: 00 00 10 18 a0 00 00 02 00 02 05 b0 00 00 00 10 "................" 20: 00 f0 ff 11 00 00 00 12 00 f0 ff 13 00 1c 00 00 "................" 30: fc 1c 00 00 00 30 00 00 fc 30 00 00 ff 01 c0 05 ".....0...0......"
bus 00->06, slot 04, func 1, vend:dev:s_vend:s_dev:rev 104c:ac1c:14c0:0007:01 class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 11 addr0 18101000, size 00001000 00: 4c 10 1c ac 07 00 10 02 01 00 07 06 20 a8 82 00 "L........... ..." 10: 00 10 10 18 a0 00 00 02 00 06 09 b0 00 00 00 14 "................" 20: 00 f0 ff 15 00 00 00 16 00 f0 ff 17 00 34 00 00 ".............4.." 30: fc 34 00 00 00 3c 00 00 fc 3c 00 00 ff 01 c0 05 ".4...<...<......"
bus 00, slot 07, func 0, vend:dev:s_vend:s_dev:rev 8086:7110:0000:0000:02 class 06, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0 00: 86 80 10 71 0f 00 80 02 02 00 80 06 00 00 80 00 "...q............" 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
bus 00, slot 07, func 1, vend:dev:s_vend:s_dev:rev 8086:7111:0000:0000:01 class 01, sub_class 01 prog_if 80, hdr 0, flags <>, irq 0 addr4 00001090, size 00000010 00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00 "...q.........@.." 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 91 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
bus 00, slot 07, func 2, vend:dev:s_vend:s_dev:rev 8086:7112:0000:0000:01 class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 5 addr4 00001060, size 00000020 00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 40 00 00 "...q.........@.." 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 61 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "a..............." 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00 "................"
bus 00, slot 07, func 3, vend:dev:s_vend:s_dev:rev 8086:7113:0000:0000:03 class 06, sub_class 80 prog_if 00, hdr 0, flags <>, irq 9 00: 86 80 13 71 03 00 80 02 03 00 80 06 00 00 00 00 "...q............" 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................"
bus 00, slot 08, func 0, vend:dev:s_vend:s_dev:rev 125d:1978:14c0:0007:10 class 04, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 5 addr0 00001400, size 00000100 00: 5d 12 78 19 05 00 90 02 10 00 01 04 00 40 00 00 "].x..........@.." 10: 01 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 14 07 00 "................" 30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 01 02 18 "................" 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" c0: 01 00 ".."
bus 00, slot 10, func 0, vend:dev:s_vend:s_dev:rev 11c1:0449:1468:0440:01 class 07, sub_class 80 prog_if 00, hdr 0, flags <pm>, irq 5 addr0 fc000000, size 00000100 addr1 00001080, size 00000008 addr2 00001800, size 00000100 00: c1 11 49 04 03 00 90 02 01 00 80 07 00 00 00 00 "..I............." 10: 00 00 00 fc 81 10 00 00 01 18 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 40 00 00 00 68 14 40 04 "........@...h.@." 30: 00 00 00 00 f8 00 00 00 00 00 00 00 05 01 fc 0e "................" 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" f0: 00 00 00 00 00 00 00 00 01 00 ".........."
bus 01, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1002:4c4d:14c0:0007:64 class 03, sub_class 00 prog_if 00, hdr 0, flags <pm,agp>, irq 11 addr0 fd000000, size 01000000 addr1 00002000, size 00000100 addr2 fc100000, size 00001000 00: 02 10 4d 4c 87 00 90 02 64 00 00 03 08 42 00 00 "..ML....d....B.." 10: 00 00 00 fd 01 20 00 00 00 00 10 fc 00 00 00 00 "..... .........." 20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 14 07 00 "................" 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 08 00 "....P..........." 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 50: 02 5c 00 00 00 00 00 00 00 00 00 00 01 00 ".\............" ---------- PCI raw data end ---------- >> pci.4: build list >> monitor.1: ddc >> isapnp.1: pnp devices pnp device: name = 00:00, bus_id = 00:00, bus = pnp path = /devices/pnp0/00:00 id = PNP 0c01 pnp device: name = 00:01, bus_id = 00:01, bus = pnp path = /devices/pnp0/00:01 id = PNP 0a05 pnp device: name = 00:02, bus_id = 00:02, bus = pnp path = /devices/pnp0/00:02 id = PNP 0700 pnp device: name = 00:03, bus_id = 00:03, bus = pnp path = /devices/pnp0/00:03 id = PNP 0401 pnp device: name = 00:04, bus_id = 00:04, bus = pnp path = /devices/pnp0/00:04 id = PNP 0501 pnp device: name = 00:05, bus_id = 00:05, bus = pnp path = /devices/pnp0/00:05 id = PNP 0c02 pnp device: name = 00:06, bus_id = 00:06, bus = pnp path = /devices/pnp0/00:06 id = PNP 0200 pnp device: name = 00:07, bus_id = 00:07, bus = pnp path = /devices/pnp0/00:07 id = PNP 0b00 pnp device: name = 00:08, bus_id = 00:08, bus = pnp path = /devices/pnp0/00:08 id = PNP 0c04 pnp device: name = 00:09, bus_id = 00:09, bus = pnp path = /devices/pnp0/00:09 id = PNP 0800 pnp device: name = 00:0a, bus_id = 00:0a, bus = pnp path = /devices/pnp0/00:0a id = PNP 0303 pnp device: name = 00:0b, bus_id = 00:0b, bus = pnp path = /devices/pnp0/00:0b id = PNP 0f13 >> isa.1: isdn ---------- ISA ISDN raw data ---------- ---------- ISA ISDN raw data end ---------- >> isa.1.1: isdn ----- cardctl status ----- Socket 0: no card Socket 1: no card ----- cardctl status end ----- ----- cardctl ident ----- Socket 0: no product info available Socket 1: no product info available ----- cardctl ident end ----- >> serial.1: read info ----- /proc/tty/driver/serial ----- 0: uart:16550A port:000003F8 irq:4 tx:8 rx:0 1: uart:unknown port:000002F8 irq:3 2: uart:unknown port:000003E8 irq:4 3: uart:unknown port:000002E8 irq:3 ----- /proc/tty/driver/serial end ----- ----- serial info ----- uart 16550A, line 0, port 0x3f8, irq 4, baud 0 ----- serial info end ----- >> serial.2: build list >> misc.5: misc data ----- misc resources ----- i/o:1 0x0000 - 0x001f (0x20) "dma1" i/o:1 0x0020 - 0x0021 (0x02) "pic1" i/o:0 0x0040 - 0x0043 (0x04) "timer0" i/o:0 0x0050 - 0x0053 (0x04) "timer1" i/o:1 0x0060 - 0x006f (0x10) "keyboard" i/o:1 0x0070 - 0x0077 (0x08) "rtc" i/o:1 0x0080 - 0x008f (0x10) "dma page reg" i/o:1 0x00a0 - 0x00a1 (0x02) "pic2" i/o:1 0x00c0 - 0x00df (0x20) "dma2" i/o:1 0x00f0 - 0x00ff (0x10) "fpu" i/o:1 0x0170 - 0x0177 (0x08) "ide1" i/o:1 0x01f0 - 0x01f7 (0x08) "ide0" i/o:1 0x0376 - 0x0376 (0x01) "ide1" i/o:1 0x0378 - 0x037a (0x03) "parport0" i/o:1 0x03c0 - 0x03df (0x20) "vesafb" i/o:1 0x03f2 - 0x03f5 (0x04) "floppy" i/o:1 0x03f6 - 0x03f6 (0x01) "ide0" i/o:1 0x03f7 - 0x03f7 (0x01) "floppy DIR" i/o:1 0x03f8 - 0x03ff (0x08) "serial" i/o:0 0x04d0 - 0x04d1 (0x02) "pnp 00:05" i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1" i/o:0 0x1000 - 0x103f (0x40) "0000:00:07.3" i/o:0 0x1000 - 0x1003 (0x04) "PM1a_EVT_BLK" i/o:0 0x1004 - 0x1005 (0x02) "PM1a_CNT_BLK" i/o:0 0x1008 - 0x100b (0x04) "PM_TMR" i/o:0 0x100c - 0x100f (0x04) "GPE0_BLK" i/o:0 0x1010 - 0x1015 (0x06) "ACPI CPU throttle" i/o:0 0x1016 - 0x103f (0x2a) "motherboard" i/o:0 0x1016 - 0x103f (0x2a) "pnp 00:05" i/o:0 0x1040 - 0x105f (0x20) "0000:00:07.3" i/o:0 0x1040 - 0x104f (0x10) "motherboard" i/o:0 0x1040 - 0x104f (0x10) "pnp 00:05" i/o:0 0x1040 - 0x1047 (0x08) "piix4-smbus" i/o:0 0x1060 - 0x107f (0x20) "0000:00:07.2" i/o:0 0x1060 - 0x107f (0x20) "uhci_hcd" i/o:0 0x1080 - 0x1087 (0x08) "0000:00:10.0" i/o:0 0x1090 - 0x109f (0x10) "0000:00:07.1" i/o:1 0x1090 - 0x1097 (0x08) "ide0" i/o:1 0x1098 - 0x109f (0x08) "ide1" i/o:0 0x1400 - 0x14ff (0x100) "0000:00:08.0" i/o:0 0x1400 - 0x14ff (0x100) "ESS Maestro" i/o:0 0x1800 - 0x18ff (0x100) "0000:00:10.0" i/o:0 0x1c00 - 0x1cff (0x100) "PCI CardBus #02" i/o:0 0x2000 - 0x2fff (0x1000) "PCI Bus #01" i/o:0 0x2000 - 0x20ff (0x100) "0000:01:00.0" i/o:0 0x3000 - 0x30ff (0x100) "PCI CardBus #02" i/o:0 0x3400 - 0x34ff (0x100) "PCI CardBus #06" i/o:0 0x3810 - 0x381f (0x10) "motherboard" i/o:0 0x3810 - 0x381f (0x10) "pnp 00:05" i/o:0 0x3c00 - 0x3cff (0x100) "PCI CardBus #06" irq:1 0 ( 32159) "timer" irq:0 1 ( 290) "i8042" irq:1 2 ( 0) "cascade" irq:1 4 ( 8) "serial" irq:0 5 ( 633) "uhci_hcd:usb1" "ltserial" "ESS Maestro" irq:1 6 ( 8) "floppy" irq:1 8 ( 1) "rtc" irq:0 9 ( 42) "acpi" irq:0 11 ( 2) "yenta" "yenta" irq:0 12 ( 110) "i8042" irq:1 14 ( 73) "ide0" irq:1 15 ( 774) "ide1" dma:1 2 "floppy" dma:1 4 "cascade" ----- misc resources end ----- >> parallel.1: pp mod ----- exec: "/sbin/rmmod parport_pc" ----- ----- return code: ? ----- ----- exec: "/sbin/modprobe parport_pc" ----- ----- return code: ? ----- >> parallel.2.1: lp read info >> parallel.2.2: lp read info >> parallel.2.3: lp read info ----- parallel info ----- /proc/sys/dev/parport/parport0/base-addr 888 1912 /proc/sys/dev/parport/parport0/autoprobe ----- parallel info end ----- >> parallel.5: ppa mod ----- exec: "/sbin/modprobe ppa " ----- ----- return code: ? ----- >> parallel.6: zip read info ----- exec: "/sbin/rmmod ppa" ----- ----- return code: ? ----- ----- parallel info ----- ----- parallel info end ----- >> block.1: block modules ----- exec: "/sbin/modprobe ide_cd " ----- FATAL: Module ide_cd not found. ----- return code: ? ----- ----- exec: "/sbin/modprobe sr_mod " ----- FATAL: Module sr_mod not found. ----- return code: ? ----- ----- exec: "/sbin/modprobe sd_mod " ----- FATAL: Module sd_mod not found. ----- return code: ? ----- ----- exec: "/sbin/modprobe st " ----- ----- return code: ? ----- >> block.2: sysfs drivers ----- sysfs driver list (id 0x61de9bdb159efc8e) ----- ide-cdrom: /devices/pci0000:00/0000:00:07.1/ide1/1.0 ide-disk: /devices/pci0000:00/0000:00:07.1/ide0/0.0 ES1968 (ESS Maestro): /devices/pci0000:00/0000:00:08.0 ES1968 (ESS Maestro): /module/snd_es1968 PIIX_IDE: /devices/pci0000:00/0000:00:07.1 agpgart-intel: /devices/pci0000:00/0000:00:00.0 piix4_smbus: /devices/pci0000:00/0000:00:07.3 uhci_hcd: /devices/pci0000:00/0000:00:07.2 yenta_cardbus: /devices/pci0000:00/0000:00:04.0 yenta_cardbus: /devices/pci0000:00/0000:00:04.1 i8042: /devices/platform/i8042 serial8250: /devices/platform/serial8250 vesafb: /devices/platform/vesafb.0 i8042 aux: /devices/pnp0/00:0b i8042 kbd: /devices/pnp0/00:0a parport_pc: /devices/pnp0/00:03 serial: /devices/pnp0/00:04 system: /devices/pnp0/00:00 system: /devices/pnp0/00:05 sd: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0 atkbd: /devices/platform/i8042/serio1 psmouse: /devices/platform/i8042/serio0 hub: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0 hub: /module/usbcore usb-storage: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0 usb-storage: /module/usb_storage usb: /devices/pci0000:00/0000:00:07.2/usb1/1-1 usb: /devices/pci0000:00/0000:00:07.2/usb1 usb: /module/usbcore usbfs: /module/usbcore ----- sysfs driver list end ----- >> block.3: cdrom ----- /proc/sys/dev/cdrom/info ----- drive name: hdc drive speed: 24 drive # of slots: 1 Can close tray: 1 Can open tray: 1 Can lock tray: 1 Can change speed: 1 Can select disk: 0 Can read multisession: 1 Can read MCN: 1 Reports media changed: 1 Can play audio: 1 Can write CD-R: 0 Can write CD-RW: 0 Can read DVD: 1 Can write DVD-R: 0 Can write DVD-RAM: 0 Can read MRW: 1 Can write MRW: 1 Can write RAM: 1 ----- /proc/sys/dev/cdrom/info end ----- >> block.4: partition ----- /proc/partitions ----- 7 0 559380 loop0 3 0 11789568 hda 3 1 6176488 hda1 3 2 1 hda2 3 5 408208 hda5 3 6 5201248 hda6 8 0 487872 sda ----- /proc/partitions end ----- disks: hda sda partitions: hda1 hda2 hda5 hda6 >> block.5: get sysfs block dev data ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:07.1/ide0/0.0 ide: bus_id = 1.0 path = /devices/pci0000:00/0000:00:07.1/ide1/1.0 block: name = fd0, path = /block/fd0 dev = 2:0 range = 1 block device: bus = platform, bus_id = floppy.0 driver = unknown path = /devices/platform/floppy.0 block: name = hda, path = /block/hda dev = 3:0 range = 64 block device: bus = ide, bus_id = 0.0 driver = ide-disk path = /devices/pci0000:00/0000:00:07.1/ide0/0.0 block: name = hdc, path = /block/hdc dev = 22:0 range = 1 block device: bus = ide, bus_id = 1.0 driver = ide-cdrom path = /devices/pci0000:00/0000:00:07.1/ide1/1.0 hdc: el torito boot catalog at 0x0026 media type: 0 load address: 0x0000 block: name = loop0, path = /block/loop0 dev = 7:0 range = 1 block: name = loop1, path = /block/loop1 dev = 7:1 range = 1 block: name = loop2, path = /block/loop2 dev = 7:2 range = 1 block: name = loop3, path = /block/loop3 dev = 7:3 range = 1 block: name = loop4, path = /block/loop4 dev = 7:4 range = 1 block: name = loop5, path = /block/loop5 dev = 7:5 range = 1 block: name = loop6, path = /block/loop6 dev = 7:6 range = 1 block: name = loop7, path = /block/loop7 dev = 7:7 range = 1 block: name = md0, path = /block/md0 dev = 9:0 range = 1 block: name = ram0, path = /block/ram0 dev = 1:0 range = 1 block: name = ram10, path = /block/ram10 dev = 1:10 range = 1 block: name = ram11, path = /block/ram11 dev = 1:11 range = 1 block: name = ram12, path = /block/ram12 dev = 1:12 range = 1 block: name = ram13, path = /block/ram13 dev = 1:13 range = 1 block: name = ram14, path = /block/ram14 dev = 1:14 range = 1 block: name = ram15, path = /block/ram15 dev = 1:15 range = 1 block: name = ram1, path = /block/ram1 dev = 1:1 range = 1 block: name = ram2, path = /block/ram2 dev = 1:2 range = 1 block: name = ram3, path = /block/ram3 dev = 1:3 range = 1 block: name = ram4, path = /block/ram4 dev = 1:4 range = 1 block: name = ram5, path = /block/ram5 dev = 1:5 range = 1 block: name = ram6, path = /block/ram6 dev = 1:6 range = 1 block: name = ram7, path = /block/ram7 dev = 1:7 range = 1 block: name = ram8, path = /block/ram8 dev = 1:8 range = 1 block: name = ram9, path = /block/ram9 dev = 1:9 range = 1 block: name = sda, path = /block/sda dev = 8:0 range = 16 block device: bus = scsi, bus_id = 0:0:0:0 driver = sd path = /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0 vendor = Pretec model = 512MB Gini rev = 1.10 type = 0 >> block.5: /dev/sda >> block.5.1: /dev/sda geo dev = /dev/sda, fd = 3 open ok, fd = 3 /dev/sda: ioctl(geo) ok /dev/sda: ioctl(block size) ok /dev/sda: ioctl(disk size) ok >> block.5.2: /dev/sda serial >> scsi.1: scsi tape >> scsi.2: scsi generic scsi: name = sg0, path = /class/scsi_generic/sg0 dev = 21:0 scsi device: bus = scsi, bus_id = 0:0:0:0 driver = sd path = /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0 >> usb.1: sysfs drivers >> usb.2: usb usb dev: /devices/pci0000:00/0000:00:07.2/usb1/1-1 usb dev: /devices/pci0000:00/0000:00:07.2/usb1 usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb path = /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0 bInterfaceNumber = 0 bInterfaceClass = 9 bInterfaceSubClass = 0 bInterfaceProtocol = 0 if: 1-0:1.0 @ /devices/pci0000:00/0000:00:07.2/usb1 bDeviceClass = 9 bDeviceSubClass = 0 bDeviceProtocol = 0 idVendor = 0x0000 idProduct = 0x0000 manufacturer = "Linux 2.6.14-kanotix-9 uhci_hcd" product = "UHCI Host Controller" serial = "0000:00:07.2" bcdDevice = 0206 speed = "12" usb device: name = 1-1:1.0, bus_id = 1-1:1.0, bus = usb path = /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0 bInterfaceNumber = 0 bInterfaceClass = 8 bInterfaceSubClass = 6 bInterfaceProtocol = 80 if: 1-1:1.0 @ /devices/pci0000:00/0000:00:07.2/usb1/1-1 bDeviceClass = 0 bDeviceSubClass = 0 bDeviceProtocol = 0 idVendor = 0x4146 idProduct = 0xba01 product = "USB Mass Storage Device" serial = "07AB0000000611" bcdDevice = 0100 speed = "12" usb device: name = 1-1, bus_id = 1-1, bus = usb path = /devices/pci0000:00/0000:00:07.2/usb1/1-1 usb device: name = usb1, bus_id = usb1, bus = usb path = /devices/pci0000:00/0000:00:07.2/usb1 >> usb.3.1: joydev mod ----- exec: "/sbin/modprobe joydev " ----- FATAL: Module joydev not found. ----- return code: ? ----- >> usb.3.2: evdev mod >> usb.3.3: input input: name = event0, path = /class/input/event0 dev = 13:64 input device: bus = serio, bus_id = serio1 driver = atkbd path = /devices/platform/i8042/serio1 input: name = event1, path = /class/input/event1 dev = 13:65 input device: bus = serio, bus_id = serio0 driver = psmouse path = /devices/platform/i8042/serio0 input: name = event2, path = /class/input/event2 dev = 13:66 input: name = mice, path = /class/input/mice dev = 13:63 input: name = mouse0, path = /class/input/mouse0 dev = 13:32 input device: bus = serio, bus_id = serio0 driver = psmouse path = /devices/platform/i8042/serio0 >> usb.3.4: lp >> edd.1: edd mod ----- exec: "/sbin/modprobe edd " ----- FATAL: Module edd not found. ----- return code: ? ----- >> edd.2: edd info >> braille.1.1: alva >> braille.2.1: alva open >> braille.3.1: alva init ok >> braille.4.1: alva read data alva.100@/dev/ttyS0[0]: >> braille.5.1: alva read done >> braille.1.1: fhp_old >> braille.2.1: fhp open >> braille.3.1: fhp init ok >> braille.4.1: fhp write ok >> braille.5.1: fhp read done fhp@/dev/ttyS0[0]: no fhp display: 0x00 >> braille.1.1: fhp_el >> braille.2.1: fhp open >> braille.3.1: fhp init ok >> braille.4.1: fhp write ok >> braille.5.1: fhp read done fhp@/dev/ttyS0[0]: no fhp display: 0x00 >> braille.1.1: ht >> braille.2.1: ht open >> braille.3.1: ht init ok >> braille.4.1: ht write ok >> braille.5.1: ht read done ht@/dev/ttyS0[1]: 00 "." no ht display: 0x00 >> braille.1.1: baum >> braille.2.1: baum open >> braille.3.1: baum write ok >> braille.4.1: baum read done baum@/dev/ttyS0[0]: >> modem.1: serial ****** started child process 2296 (15s/120s) ****** >> modem.2: init >> modem.3.1: at test >> modem.3.2: at test >> modem.3.3: at test >> modem.3.4: at test >> modem.4: init string >> modem.5: speed >> modem.5: pnp id ----- serial modems ----- /dev/ttyS0 not a modem ----- serial modems end ----- ****** stopped child process 2296 (121s) ****** ----- serial modems ----- /dev/ttyS0 not a modem ----- serial modems end ----- >> mouse.2: serial ****** started child process 2297 (20s/20s) ****** ----- serial mice ----- /dev/ttyS0 ----- serial mice end ----- ****** stopped child process 2297 (19s) ****** ----- serial mice ----- /dev/ttyS0 ----- serial mice end ----- >> input.1: joydev mod ----- exec: "/sbin/modprobe joydev " ----- FATAL: Module joydev not found. ----- return code: ? ----- >> input.1.1: evdev mod >> input.2: input ----- /proc/bus/input/devices ----- I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 N: Name="AT Translated Set 2 keyboard" P: Phys=isa0060/serio0/input0 H: Handlers=kbd event0 B: EV=120013 B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff ffffffff B: MSC=10 B: LED=7 I: Bus=0011 Vendor=0002 Product=0007 Version=0000 N: Name="SynPS/2 Synaptics TouchPad" P: Phys=isa0060/serio1/input0 H: Handlers=mouse0 event1 B: EV=b B: KEY=6420 0 70000 0 0 0 0 0 0 0 0 B: ABS=11000003 I: Bus=0010 Vendor=001f Product=0001 Version=0100 N: Name="PC Speaker" P: Phys=isa0061/input0 H: Handlers=kbd event2 B: EV=40001 B: SND=6 ----- /proc/bus/input/devices end ----- bus = 17, name = AT Translated Set 2 keyboard handlers = kbd event0 key = 000000040200000003802078f840d001f2ffffdfffefffffffffffffffffffff mouse buttons = 0 mouse wheels = 0 bus = 17, name = SynPS/2 Synaptics TouchPad handlers = mouse0 event1 key = 0000642000000000000700000000000000000000000000000000000000000000000000000000000000000000 mouse buttons = 3 mouse wheels = 0 bus = 16, name = PC Speaker handlers = kbd event2 mouse buttons = 0 mouse wheels = 0 >> fb.1: read info >> net.1: get network data net interface: name = lo, classname = net, path = /class/net/lo hw_addr = 00:00:00:00:00:00 >> pppoe.1: looking for pppoe >> isdn.1: list >> dsl.1: list >> int.2: cdrom >> int.3: media >> int.4.1: /dev/hda read_block0: 512 bytes (5s, 0us) >> int.4.2: /dev/sda read_block0: 512 bytes (5s, 0us) >> int.4: floppy >> int.5: bios bios ctrl 0: 20 bios ctrl 1: 21 bios ctrl 2: 46 >> int.6: mouse >> int.7: hdb >> int.8: usbscsi >> int.9: hotplug >> int.10: modem >> int.11: wlan >> int.12: udev ----- udevinfo ----- /block/hda=/dev/hda /block/hda/hda1=/dev/hda1 /block/hda/hda2=/dev/hda2 /block/hda/hda5=/dev/hda5 /block/hda/hda6=/dev/hda6 /block/hdc=/dev/hdc /block/sda=/dev/sda /class/input/event0=/dev/input/event0 /class/input/event1=/dev/input/event1 /class/input/event2=/dev/input/event2 /class/input/mice=/dev/input/mice /class/input/mouse0=/dev/input/mouse0 /class/misc/device-mapper=/dev/mapper/control /class/sound/controlC0=/dev/snd/controlC0 /class/sound/midiC0D0=/dev/snd/midiC0D0 /class/sound/pcmC0D0c=/dev/snd/pcmC0D0c /class/sound/pcmC0D0p=/dev/snd/pcmC0D0p /class/sound/timer=/dev/snd/timer /class/tty/ttyLTM0=/dev/ttyLTM0 /class/usb_device/usbdev1.1=/dev/bus/usb/001/001 /class/usb_device/usbdev1.2=/dev/bus/usb/001/002 ----- udevinfo end ----- >> int.13: device names >> int.14: soft raid ----- soft raid devices ----- ----- soft raid devices end ----- ----- /proc/modules ----- st 36256 0 - Live 0xcd0c0000 parport_pc 35908 0 - Live 0xcd06e000 parport 30536 1 parport_pc, Live 0xcc838000 cryptoloop 3072 0 - Live 0xcd060000 fuse 30220 0 - Live 0xcd078000 pcmcia 31268 4 - Live 0xcd065000 video 14212 0 - Live 0xcd051000 thermal 10888 0 - Live 0xcd056000 processor 18748 1 thermal, Live 0xccfc2000 fan 3460 0 - Live 0xccfc0000 container 3328 0 - Live 0xccfb5000 button 5008 0 - Live 0xccfb2000 battery 7684 0 - Live 0xccf4d000 ac 3460 0 - Live 0xccf58000 capability 3208 0 - Live 0xcc806000 commoncap 5248 1 capability, Live 0xccf50000 snd_es1968 26368 0 - Live 0xccfb8000 gameport 11400 1 snd_es1968, Live 0xccf08000 snd_ac97_codec 86048 1 snd_es1968, Live 0xccf77000 snd_ac97_bus 1920 1 snd_ac97_codec, Live 0xcced8000 snd_pcm_oss 47264 0 - Live 0xccfa2000 snd_mixer_oss 15488 1 snd_pcm_oss, Live 0xccf53000 snd_pcm 76808 3 snd_es1968,snd_ac97_codec,snd_pcm_oss, Live 0xccf8e000 snd_timer 20740 1 snd_pcm, Live 0xccf70000 snd_page_alloc 8072 2 snd_es1968,snd_pcm, Live 0xccf43000 snd_mpu401_uart 5760 1 snd_es1968, Live 0xccf40000 snd_rawmidi 20128 1 snd_mpu401_uart, Live 0xccf47000 snd_seq_device 6796 1 snd_rawmidi, Live 0xccf0c000 usb_storage 78784 1 - Live 0xccf5b000 snd 45156 9 snd_es1968,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_ rawmidi,snd_seq_device, Live 0xccf18000 ltserial 9904 0 - Live 0xcc873000 ltmodem 555600 1 ltserial, Live 0xccfc8000 soundcore 7392 1 snd, Live 0xccf05000 i2c_piix4 7568 0 - Live 0xcced5000 uhci_hcd 29712 0 - Live 0xccf0f000 usbcore 102912 3 usb_storage,uhci_hcd, Live 0xccf25000 evdev 7296 0 - Live 0xcc85e000 8250_pnp 8320 0 - Live 0xcced1000 8250 17828 1 8250_pnp, Live 0xccee7000 serial_core 17536 2 ltserial,8250, Live 0xccee1000 yenta_socket 22924 4 - Live 0xcceda000  /rsrc_nonstatic 10880 1 yenta_socket, Live 0xcc86f000 pcmcia_core 34448 3 pcmcia,yenta_socket,rsrc_nonstatic, Live 0xcceb6000 shpchp 86884 0 - Live 0xcceee000 pci_hotplug 24372 1 shpchp, Live 0xcc878000 intel_agp 19100 1 - Live 0xcc869000 agpgart 27592 1 intel_agp, Live 0xcc861000 pcspkr 3424 0 - Live 0xcc842000 psmouse 33028 0 - Live 0xcc844000 serio_raw 5508 0 - Live 0xcc835000 ntfs 212624 0 - Live 0xcce81000 ----- /proc/modules end ----- used irqs: 0,1,2,4,5,6,8,9,11,12,14,15 =========== end debug info ============ 01: None 00.0: 0102 Floppy disk controller [Created at floppy.111] Unique ID: rdCR.3wRL2_g4d2B Hardware Class: storage Model: "Floppy disk controller" I/O Ports: 0x3f2-0x3f5 (rw) DMA: 2 IRQ: 6 (8 events) I/O Port: 0x3f7 (rw) Config Status: cfg=new, avail=yes, need=no, active=unknown
02: Floppy 00.0: 10603 Floppy Disk [Created at floppy.119] Unique ID: sPPV.oZ89vuho4Y3 Parent ID: rdCR.3wRL2_g4d2B Hardware Class: floppy Model: "Floppy Disk" Device File: /dev/fd0 Size: 2880 sectors a 512 bytes Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #1 (Floppy disk controller)
03: None 00.0: 10105 BIOS [Created at bios.139] Unique ID: rdCR.lZF+r4EgHp4 Hardware Class: bios BIOS Keyboard LED Status: Scroll Lock: off Num Lock: off Caps Lock: off Serial Port 0: 0x3f8 Parallel Port 0: 0x378 PnP BIOS: @@@0000 BIOS32 Service Directory Entry: 0xfd890 Config Status: cfg=new, avail=yes, need=no, active=unknown
04: None 00.0: 10107 System [Created at sys.50] Unique ID: rdCR.n_7QNeEnh23 Hardware Class: system Config Status: cfg=new, avail=yes, need=no, active=unknown
05: None 00.0: 10104 FPU [Created at misc.190] Unique ID: rdCR.EMpH5pjcahD Hardware Class: unknown Model: "FPU" I/O Ports: 0xf0-0xff (rw) Config Status: cfg=new, avail=yes, need=no,
-------------- Motto: chown -R linux:GNU world
|