iB::Topic::Problem by installing to USB

	Damn Small Linux :: Damn Small Linux Board The DSL Forums

» Welcome Guest
[ Log In :: Register ]

Damn Small Linux Board » Damn Small Linux » USB booting » Problem by installing to USB

		Mini-ITX Boards Sale, Fanless BareBones Mini-ITX, Bootable 1G DSL USBs, 533MHz Fanless PC <-- SALE $200 each!
		Get The Official Damn Small Linux Book. DSL Market , Great VPS hosting provided by Tektonic

Pages: (3) </ 1 2 [3] >/

[ Track this topic :: Email this topic :: Print this topic ]

Topic: Problem by installing to USB, /dev/DSL1: No such file or directory

< Next Oldest | Next Newest >

redSHIFT
Unregistered

Posted: Dec. 08 2005,15:29

Quote (cbagger01 @ Dec. 07 2005,12:53)

This tells me that your CD/DVD drive was detected at devicename sr0

But there is no mention of your USB drive.

For example, when I have my Sandisk 1GB Cruzer Mini, I see this info:

Code Sample

scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: SanDisk Model: Cruzer Mini Rev: 0.1
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0
SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB)
sdb: Write Protect is off
sdb: sdb1

Maybe your USB controller is not working correctly.

If you type:

lsmod

you should see a uhci, ohci or ehci driver module present, and with your drive plugged in you should see usb-storage present.

You can also see this on the Modules tab of the System Stats program.

OK
I typed lsmod and near the bottom of the list it shows

usb-storage 61952 0 (unused)
usb-uhci 21516 0(unused)
usbcore 58016 1[hid usb-storage usb-uhci]

I am assuming that the zeros mean that the drive is not being recognized

Any thoughts on what to try next? Bios update?

This is a Gateway 680 portable. I would try another drive but I'm in mainland China , not very easy for me.

cbagger01

Group: Members
Posts: 4264
Joined: Oct. 2003

Posted: Dec. 08 2005,18:03

Hmm..

usb-storage is the driver for USB mass storge devices, and usb-uhci is the USB 1.1 speed driver for UHCI controllers.

Maybe you can try manually loading the USB2.0 driver from a terminal window:

sudo su
modprobe ehci-hcd

and then plug your USB drive in and wait a few seconds for it to register.

Then try the dmesg command again to see if your drive has been found.

Also, try different physical USB ports if your computer has more than 1 port.

redSHIFT
Unregistered

Posted: Dec. 09 2005,17:40

Quote (cbagger01 @ Dec. 08 2005,13:03)

after a couple trys I was able install USB HDD and it looked successful.

Then booting from usb it says
Can't find KNOPPIX filesystem, sorry.
Dropping to a very limited shell.
press reset button to quit.

So I used cfdisk /dev/sda to partion the drive into a bootable 350mb linux partition and 650mb fat32 partition and then installed DSL USBHDD again.

It failed again in the same way when trying to boot from the stick.

now what do you think?