Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dimension 2400 mini report
#1
This machine won't put up a boot screen from physical IDE CD, USB boot, or USB CD drive.  Verified same issue with AntiX 23 runit i386 core.  Fought a day or so, put HD in another machine, installed AntiX core with extra .197 kernel + build tools (to build wifi module required for target machine.  Boots fine.  Battling other things (and more machines to test--have eeePC issues as well) but just a quick dump for now.  

Code:
System:
  Host: ax1 Kernel: 5.10.188-antix.1-486-smp arch: i686 bits: 32 compiler: gcc v: 13.2.0
    Console: pty pts/0 Distro: antiX-23-runit_386-core Arditi del Popolo 26 August 2023 base: Debian
    GNU/Linux 12 (bookworm)
Machine:
  Type: Desktop System: Dell product: Dimension 2400 v: N/A serial: JR4W831 Chassis: type: 15
    serial: JR4W831
  Mobo: Dell model: 0G1548 v: A00 serial: ..CN7082136IE0AN. BIOS: Dell v: A00 date: 05/23/2003
Memory:
  System RAM: total: 1024 MiB available: 995.9 MiB used: 154.6 MiB (15.5%) igpu: 1 MiB
  Array-1: capacity: 1024 MiB slots: 2 modules: 1 EC: None max-module-size: 1024 MiB note: est.
  Device-1: DIMM_1 type: SDRAM size: 1024 MiB speed: 266 MT/s volts: N/A manufacturer: N/A
    part-no: N/A
  Device-2: DIMM_2 type: no module installed
CPU:
  Info: single core model: Intel Celeron bits: 32 arch: Netburst Northwood rev: 9 cache: L1: 8 KiB
    L2: 128 KiB note: check
  Speed (MHz): 2194 min/max: N/A core: 1: 2194 bogomips: 4387
  Flags: ht pae sse sse2
Graphics:
  Device-1: Intel 82845G/GL[Brookdale-G]/GE Integrated Graphics vendor: Dell Dimension 2400
    driver: i915 v: kernel arch: Gen-2 ports: active: VGA-1 empty: none bus-ID: 00:02.0
    chip-ID: 8086:2562
  Display: server: No display server data found. Headless machine? tty: 128x48
  Monitor-1: VGA-1 size-res: N/A in console
  API: N/A Message: No API data available in console. Headless machine?
Audio:
  Device-1: Intel 82801DB/DBL/DBM AC97 Audio vendor: Dell Dimension 2400 driver: snd_intel8x0
    v: kernel bus-ID: 00:1f.5 chip-ID: 8086:24c5
  API: ALSA v: k5.10.188-antix.1-486-smp status: kernel-api
Network:
  Device-1: Broadcom BCM4401 100Base-T vendor: Dell Dimension 2400 driver: N/A port: N/A
    bus-ID: 01:09.0 chip-ID: 14e4:4401
Drives:
  Local Storage: total: 44.48 GiB used: 6.18 GiB (13.9%)
  ID-1: /dev/sda vendor: Western Digital model: WD400EB-75CPF0 size: 37.27 GiB speed: <unknown>
    serial: WD-WMAATD909850
  ID-2: /dev/sdb model: N/A size: 7.21 GiB type: USB rev: 2.1 spd: 480 Mb/s lanes: 1
    serial: 070737E490443527
  Floppy-1: /dev/fd0
  Optical-1: /dev/sr0 vendor: _NEC model: CD-RW NR-9300A rev: 105B dev-links: cdrom,cdrw
  Features: speed: 48 multisession: yes audio: yes dvd: no rw: cd-r,cd-rw state: running
Partition:
  ID-1: / size: 23.78 GiB used: 2.14 GiB (9.0%) fs: ext4 dev: /dev/sda1 label: N/A
    uuid: 050d6f63-3630-4590-ac95-42e446f3346d
  ID-2: /tmp/mnt size: 7.2 GiB used: 4.04 GiB (56.1%) fs: vfat dev: /dev/sdb1 label: USB DISK
    uuid: 94DC-7A63
Swap:
  ID-1: swap-1 type: partition size: 1.94 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
    label: N/A uuid: 87c7b2cd-1586-4591-a1b8-5ede717e2d5f
Unmounted:
  ID-1: /dev/sda2 size: 8 GiB fs: ext4 label: N/A uuid: 9a8c0c51-b6ed-4229-baff-dbad7ccc2e29
  ID-2: /dev/sda4 size: 3 GiB fs: ext4 label: N/A uuid: b7f5efcb-049a-4777-9ebe-c2330e890984
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002
  Device-1: 1-4:2 info: Kingston DataTraveler R3.0 type: mass storage driver: usb-storage
    rev: 2.1 speed: 480 Mb/s lanes: 1 chip-ID: 13fe:5200
  Hub-2: 2-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s lanes: 1
    chip-ID: 1d6b:0001
  Hub-3: 3-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s lanes: 1
    chip-ID: 1d6b:0001
  Hub-4: 4-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s lanes: 1
    chip-ID: 1d6b:0001
Sensors:
  Src: /sys Message: No sensor data found in /sys/class/hwmon.
Info:
  Processes: 86 Uptime: 4m Init: runit v: N/A runlevel: 2 Compilers: gcc: 12.2.0 alt: 12 Packages:
  pm: dpkg pkgs: 561 Shell: Bash v: 5.2.15 running-in: pty pts/0 inxi: 3.3.31

and a boot log
Code:
[    0.000000] Linux version 5.10.188-antix.1-486-smp (root@antix1) (gcc (Debian 13.2.0-1) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41) #1 SMP Tue Aug 1 00:54:36 EEST 2023
[    0.000000] CPU0: Hyper-Threading is disabled
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fe73fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fe74000-0x000000003fe75fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003fe76000-0x000000003fe96fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003fe97000-0x000000003fefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Dell Computer Corporation Dimension 2400              /0G1548, BIOS A00 05/23/2003
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2193.670 MHz processor
[    0.008355] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.008367] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.008384] last_pfn = 0x3fe74 max_arch_pfn = 0x100000
[    0.008396] MTRR default type: uncachable
[    0.008399] MTRR fixed ranges enabled:
[    0.008403]  00000-9FFFF write-back
[    0.008405]  A0000-BFFFF uncachable
[    0.008408]  C0000-C3FFF write-protect
[    0.008410]  C4000-C7FFF uncachable
[    0.008413]  C8000-CBFFF write-protect
[    0.008415]  CC000-CFFFF uncachable
[    0.008418]  D0000-D3FFF write-protect
[    0.008420]  D4000-D7FFF uncachable
[    0.008423]  D8000-DBFFF write-protect
[    0.008425]  DC000-DFFFF uncachable
[    0.008428]  E0000-E3FFF write-protect
[    0.008430]  E4000-E7FFF uncachable
[    0.008433]  E8000-EBFFF write-protect
[    0.008436]  EC000-EFFFF uncachable
[    0.008438]  F0000-FFFFF write-protect
[    0.008441] MTRR variable ranges enabled:
[    0.008445]  0 base 000000000 mask FC0000000 write-back
[    0.008448]  1 base 03FF00000 mask FFFF00000 uncachable
[    0.008451]  2 disabled
[    0.008453]  3 disabled
[    0.008455]  4 disabled
[    0.008457]  5 disabled
[    0.008459]  6 disabled
[    0.008461]  7 disabled
[    0.008629] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC 
[    0.008809] total RAM covered: 1023M
[    0.009408] Found optimal setting for mtrr clean up
[    0.009412]  gran_size: 64K chunk_size: 2M num_reg: 2  lose cover RAM: 0G
[    0.029144] found SMP MP-table at [mem 0x000fe710-0x000fe71f]
[    0.032081] initial memory mapped: [mem 0x00000000-0x173fffff]
[    0.032161] RAMDISK: [mem 0x33543000-0x35a98fff]
[    0.032182] ACPI: Early table checksum verification disabled
[    0.032195] ACPI: RSDP 0x00000000000FEB80 000014 (v00 DELL  )
[    0.032209] ACPI: RSDT 0x00000000000FD2F1 000034 (v01 DELL  2400    00000006 ASL  00000061)
[    0.032225] ACPI: FACP 0x00000000000FD325 000074 (v01 DELL  2400    00000006 ASL  00000061)
[    0.032296] ACPI: DSDT 0x00000000FFFCBE42 002404 (v01 DELL  dt_ex    00001000 MSFT 0100000D)
[    0.032311] ACPI: FACS 0x000000003FE74000 000040
[    0.032375] ACPI: SSDT 0x00000000FFFCE246 0000A7 (v01 DELL  st_ex    00001000 MSFT 0100000D)
[    0.032388] ACPI: APIC 0x00000000000FD399 00006C (v01 DELL  2400    00000006 ASL  00000061)
[    0.032400] ACPI: BOOT 0x00000000000FD405 000028 (v01 DELL  2400    00000006 ASL  00000061)
[    0.032413] ACPI: Reserving FACP table memory at [mem 0xfd325-0xfd398]
[    0.032417] ACPI: Reserving DSDT table memory at [mem 0xfffcbe42-0xfffce245]
[    0.032421] ACPI: Reserving FACS table memory at [mem 0x3fe74000-0x3fe7403f]
[    0.032424] ACPI: Reserving SSDT table memory at [mem 0xfffce246-0xfffce2ec]
[    0.032427] ACPI: Reserving APIC table memory at [mem 0xfd399-0xfd404]
[    0.032430] ACPI: Reserving BOOT table memory at [mem 0xfd405-0xfd42c]
[    0.032602] ACPI: Local APIC address 0xfee00000
[    0.032611] 142MB HIGHMEM available.
[    0.032615] 879MB LOWMEM available.
[    0.032618]  mapped low ram: 0 - 36ffe000
[    0.032620]  low ram: 0 - 36ffe000
[    0.032652] Zone ranges:
[    0.032657]  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.032662]  Normal  [mem 0x0000000001000000-0x0000000036ffdfff]
[    0.032666]  HighMem  [mem 0x0000000036ffe000-0x000000003fe73fff]
[    0.032671] Movable zone start for each node
[    0.032673] Early memory node ranges
[    0.032676]  node  0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.032678]  node  0: [mem 0x0000000000100000-0x000000003fe73fff]
[    0.032683] Initmem setup node 0 [mem 0x0000000000001000-0x000000003fe73fff]
[    0.032687] On node 0 totalpages: 261651
[    0.032691]  DMA zone: 40 pages used for memmap
[    0.032693]  DMA zone: 0 pages reserved
[    0.032696]  DMA zone: 3999 pages, LIFO batch:0
[    0.032699]  Normal zone: 2160 pages used for memmap
[    0.032702]  Normal zone: 221182 pages, LIFO batch:63
[    0.032705]  HighMem zone: 36470 pages, LIFO batch:7
[    0.032716] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.032903] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.049342] On node 0, zone HighMem: 396 pages in unavailable ranges
[    0.049361] Using APIC driver default
[    0.049386] Reserving Intel graphics memory at [mem 0x3ff00000-0x3fffffff]
[    0.049521] ACPI: PM-Timer IO Port: 0x808
[    0.049532] ACPI: Local APIC address 0xfee00000
[    0.049558] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.049567] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.049572] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.049575] ACPI: IRQ0 used by override.
[    0.049579] ACPI: IRQ9 used by override.
[    0.049585] Using ACPI (MADT) for SMP configuration information
[    0.049596] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[    0.049624] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.049629] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.049632] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.049639] [mem 0x40000000-0xfebfffff] available for PCI devices
[    0.049642] Booting paravirtualized kernel on bare hardware
[    0.049654] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.049674] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.051611] percpu: Embedded 35 pages/cpu s112460 r0 d30900 u143360
[    0.051626] pcpu-alloc: s112460 r0 d30900 u143360 alloc=35*4096
[    0.051631] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.051694] Built 1 zonelists, mobility grouping on.  Total pages: 259451
[    0.051701] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.188-antix.1-486-smp root=UUID=050d6f63-3630-4590-ac95-42e446f3346d ro quiet selinux=0
[    0.052703] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.053154] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.053264] microcode: microcode updated early to revision 0x2e, date = 2004-08-11
[    0.053277] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.053293] Initializing HighMem for node 0 (00036ffe:0003fe74)
[    0.080634] Initializing Movable for node 0 (00000000:00000000)
[    0.096252] Memory: 980852K/1046604K available (9973K kernel code, 1209K rwdata, 2904K rodata, 764K init, 480K bss, 65752K reserved, 0K cma-reserved, 145880K highmem)
[    0.096259] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.097217] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.097792] rcu: Hierarchical RCU implementation.
[    0.097800] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.097805] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.097808] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.100277] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
[    0.100634] rcu: Offload RCU callbacks from CPUs: (none).
[    0.103336] Console: colour VGA+ 80x25
[    0.103378] printk: console [tty0] enabled
[    0.103406] ACPI: Core revision 20200925
[    0.115751] APIC: Switch to symmetric I/O mode setup
[    0.115762] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.116235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.120715] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1f9ed70af55, max_idle_ns: 440795252299 ns
[    0.120730] Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.34 BogoMIPS (lpj=2193670)
[    0.120739] pid_max: default: 32768 minimum: 301
[    0.121081] LSM: Security Framework initializing
[    0.121137] Yama: becoming mindful.
[    0.121237] AppArmor: AppArmor initialized
[    0.121334] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.121348] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.122578] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.122615] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.122619] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.122632] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.122637] Spectre V2 : Mitigation: Retpolines
[    0.122640] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.122642] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.122646] Speculative Store Bypass: Vulnerable
[    0.122648] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[    0.122654] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.122657] MMIO Stale Data: Unknown: No mitigations
[    0.245058] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.20GHz (family: 0xf, model: 0x2, stepping: 0x9)
[    0.245722] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.245722] ... version:                0
[    0.245722] ... bit width:              40
[    0.245722] ... generic registers:      18
[    0.245722] ... value mask:            000000ffffffffff
[    0.245722] ... max period:            0000007fffffffff
[    0.245722] ... fixed-purpose events:  0
[    0.245722] ... event mask:            000000000003ffff
[    0.245980] rcu: Hierarchical SRCU implementation.
[    0.246931] smp: Bringing up secondary CPUs ...
[    0.246938] smp: Brought up 1 node, 1 CPU
[    0.246940] smpboot: Max logical packages: 4
[    0.246944] smpboot: Total of 1 processors activated (4387.34 BogoMIPS)
[    0.247546] devtmpfs: initialized
[    0.248474] PM: Registering ACPI NVS region [mem 0x3fe74000-0x3fe75fff] (8192 bytes)
[    0.248685] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.248700] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.249045] prandom: seed boundary self test passed
[    0.250425] prandom: 100 self tests passed
[    0.265096] prandom32: self test passed (less than 6 bits correlated)
[    0.265101] pinctrl core: initialized pinctrl subsystem
[    0.266118] NET: Registered protocol family 16
[    0.266522] audit: initializing netlink subsys (disabled)
[    0.267330] thermal_sys: Registered thermal governor 'fair_share'
[    0.267337] thermal_sys: Registered thermal governor 'bang_bang'
[    0.267339] thermal_sys: Registered thermal governor 'step_wise'
[    0.267341] thermal_sys: Registered thermal governor 'user_space'
[    0.267361] cpuidle: using governor ladder
[    0.267366] cpuidle: using governor menu
[    0.267507] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[    0.267510] Simple Boot Flag at 0x7a set to 0x1
[    0.267572] ACPI: bus type PCI registered
[    0.267579] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.268881] PCI: PCI BIOS revision 2.10 entry at 0xfbc8f, last bus=1
[    0.268888] PCI: Using configuration type 1 for base access
[    0.269761] audit: type=2000 audit(1708172163.152:1): state=initialized audit_enabled=0 res=1
[    0.275130] Kprobes globally optimized
[    0.275692] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[    0.283565] ACPI: Added _OSI(Module Device)
[    0.283570] ACPI: Added _OSI(Processor Device)
[    0.283573] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.283575] ACPI: Added _OSI(Processor Aggregator Device)
[    0.283579] ACPI: Added _OSI(Linux-Dell-Video)
[    0.283583] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.283586] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.295813] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.308890] ACPI: Interpreter enabled
[    0.308963] ACPI: (supports S0 S1 S3 S4 S5)
[    0.308969] ACPI: Using IOAPIC for interrupt routing
[    0.309106] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.309353] ACPI: Enabled 7 GPEs in block 00 to 1F
[    0.358369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.358391] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.358412] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.360002] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
[    0.360010] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.360013] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.360016] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.360019] acpi PNP0A03:00: host bridge window [mem 0x80860000-0xfebfffff window] (ignored)
[    0.360022] PCI: root bus 00: using default resources
[    0.360447] PCI host bridge to bus 0000:00
[    0.360457] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.360461] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.360466] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.360505] pci 0000:00:00.0: [8086:2560] type 00 class 0x060000
[    0.360524] pci 0000:00:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[    0.360928] pci 0000:00:02.0: [8086:2562] type 00 class 0x030000
[    0.360955] pci 0000:00:02.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[    0.360968] pci 0000:00:02.0: reg 0x14: [mem 0xfeb80000-0xfebfffff]
[    0.361378] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[    0.361443] pci 0000:00:1d.0: reg 0x20: [io  0xff80-0xff9f]
[    0.361885] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[    0.361949] pci 0000:00:1d.1: reg 0x20: [io  0xff60-0xff7f]
[    0.362380] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[    0.362446] pci 0000:00:1d.2: reg 0x20: [io  0xff40-0xff5f]
[    0.362910] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[    0.362942] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[    0.363078] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.363379] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[    0.363843] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
              * this clock source is slow. If you are sure your timer does not have
              * this bug, please use "acpi_pm_good" to disable the workaround
[    0.363854] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
[    0.363963] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
[    0.363971] pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH4 GPIO
[    0.364337] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
[    0.364366] pci 0000:00:1f.1: reg 0x10: [io  0xed90-0xed97]
[    0.364380] pci 0000:00:1f.1: reg 0x14: [io  0xed88-0xed8b]
[    0.364392] pci 0000:00:1f.1: reg 0x18: [io  0xed98-0xed9f]
[    0.364404] pci 0000:00:1f.1: reg 0x1c: [io  0xed8c-0xed8f]
[    0.364415] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[    0.364428] pci 0000:00:1f.1: reg 0x24: [mem 0xfeb7fc00-0xfeb7ffff]
[    0.364444] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.364447] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.364450] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.364452] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.364797] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[    0.364862] pci 0000:00:1f.3: reg 0x20: [io  0xeda0-0xedbf]
[    0.365213] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
[    0.365239] pci 0000:00:1f.5: reg 0x10: [io  0xee00-0xeeff]
[    0.365253] pci 0000:00:1f.5: reg 0x14: [io  0xedc0-0xedff]
[    0.365265] pci 0000:00:1f.5: reg 0x18: [mem 0xfeb7fa00-0xfeb7fbff]
[    0.365276] pci 0000:00:1f.5: reg 0x1c: [mem 0xfeb7f900-0xfeb7f9ff]
[    0.365359] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.365628] pci_bus 0000:01: extended config space not accessible
[    0.365782] pci 0000:01:05.0: [14e4:4212] type 00 class 0x070300
[    0.365808] pci 0000:01:05.0: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
[    0.365820] pci 0000:01:05.0: reg 0x14: [io  0xdff0-0xdfff]
[    0.365921] pci 0000:01:05.0: supports D1 D2
[    0.365926] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.366084] pci 0000:01:09.0: [14e4:4401] type 00 class 0x020000
[    0.366109] pci 0000:01:09.0: reg 0x10: [mem 0xfe9fe000-0xfe9fffff]
[    0.366162] pci 0000:01:09.0: reg 0x30: [mem 0xfea00000-0xfea03fff pref]
[    0.366218] pci 0000:01:09.0: supports D1 D2
[    0.366222] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.366355] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[    0.366365] pci 0000:00:1e.0:  bridge window [io  0xd000-0xdfff]
[    0.366373] pci 0000:00:1e.0:  bridge window [mem 0xfe900000-0xfeafffff]
[    0.366381] pci 0000:00:1e.0:  bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.366384] pci 0000:00:1e.0:  bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.366400] pci_bus 0000:00: on NUMA node 0
[    0.376480] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    0.377092] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
[    0.377546] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    0.378041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.378507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    0.379011] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    0.379475] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    0.379972] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.380530] iommu: Default domain type: Translated
[    0.380746] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.380753] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.380762] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.380765] vgaarb: loaded
[    0.381483] SCSI subsystem initialized
[    0.381768] libata version 3.00 loaded.
[    0.381892] ACPI: bus type USB registered
[    0.381993] usbcore: registered new interface driver usbfs
[    0.382038] usbcore: registered new interface driver hub
[    0.382076] usbcore: registered new device driver usb
[    0.382212] EDAC MC: Ver: 3.0.0
[    0.383425] NetLabel: Initializing
[    0.383432] NetLabel:  domain hash size = 128
[    0.383433] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.383480] NetLabel:  unlabeled traffic allowed by default
[    0.383486] PCI: Using ACPI for IRQ routing
[    0.383494] PCI: pci_cache_line_size set to 64 bytes
[    0.383557] e820: reserve RAM buffer [mem 0x3fe74000-0x3fffffff]
[    0.388800] clocksource: Switched to clocksource tsc-early
[    0.420381] VFS: Disk quotas dquot_6.6.0
[    0.420473] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.421038] AppArmor: AppArmor Filesystem Enabled
[    0.421159] pnp: PnP ACPI init
[    0.425181] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.425191] system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved
[    0.425197] system 00:00: [mem 0x01000000-0x3fe73fff] could not be reserved
[    0.425201] system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved
[    0.425206] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.425210] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.425213] system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved
[    0.425217] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.425221] system 00:00: [mem 0xffc00000-0xffffffff] has been reserved
[    0.425248] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.428022] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.430997] pnp 00:02: [dma 2]
[    0.431286] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.432538] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.435316] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.437929] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.441246] pnp 00:06: [dma 0 disabled]
[    0.441770] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.443646] pnp 00:07: disabling [io  0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.443653] pnp 00:07: disabling [io  0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.443825] system 00:07: [io  0x0c00-0x0c7f] has been reserved
[    0.443858] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.444797] pnp: PnP ACPI: found 8 devices
[    0.444813] PnPBIOS: Disabled
[    0.489080] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.489345] NET: Registered protocol family 2
[    0.489563] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.491092] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.491124] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.491159] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.491221] TCP: Hash tables configured (established 8192 bind 8192)
[    0.491440] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.491474] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.491981] NET: Registered protocol family 1
[    0.492041] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    0.492051] pci 0000:00:1e.0:  bridge window [io  0xd000-0xdfff]
[    0.492060] pci 0000:00:1e.0:  bridge window [mem 0xfe900000-0xfeafffff]
[    0.492074] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.492077] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.492081] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.492084] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[    0.492087] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.492090] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[    0.492158] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.495282] PCI: CLS 0 bytes, default 64
[    0.495446] Trying to unpack rootfs image as initramfs...
[    2.131665] Freeing initrd memory: 38232K
[    2.133450] Initialise system trusted keyrings
[    2.133685] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    2.137829] zbud: loaded
[    2.139453] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.139701] ntfs: driver 2.1.32 [Flags: R/W].
[    2.139894] fuse: init (API version 7.32)
[    2.166637] Key type asymmetric registered
[    2.166644] Asymmetric key parser 'x509' registered
[    2.166682] bounce: pool size: 64 pages
[    2.166748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    2.166989] io scheduler mq-deadline registered
[    2.168037] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.168963] isapnp: Scanning for PnP cards...
[    2.526018] isapnp: No Plug & Play device found
[    2.526438] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.526698] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.530281] Linux agpgart interface v0.103
[    2.530582] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[    2.538288] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[    2.551969] brd: module loaded
[    2.584172] loop: module loaded
[    2.584921] ata_piix 0000:00:1f.1: version 2.13
[    2.586721] scsi host0: ata_piix
[    2.587378] scsi host1: ata_piix
[    2.587548] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    2.587554] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    2.589291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.589298] ehci-pci: EHCI PCI platform driver
[    2.589802] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.589830] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.589855] ehci-pci 0000:00:1d.7: debug port 1
[    2.593803] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.594386] ehci-pci 0000:00:1d.7: irq 23, io mem 0xffa80800
[    2.601111] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.601348] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.601355] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.601358] usb usb1: Product: EHCI Host Controller
[    2.601361] usb usb1: Manufacturer: Linux 5.10.188-antix.1-486-smp ehci_hcd
[    2.601364] usb usb1: SerialNumber: 0000:00:1d.7
[    2.601873] hub 1-0:1.0: USB hub found
[    2.601925] hub 1-0:1.0: 6 ports detected
[    2.602721] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.602752] ohci-pci: OHCI PCI platform driver
[    2.602819] ohci-platform: OHCI generic platform driver
[    2.603329] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    2.606536] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.606564] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.607156] mousedev: PS/2 mouse device common for all mice
[    2.607420] intel_pstate: CPU model not supported
[    2.607468] sdhci: Secure Digital Host Controller Interface driver
[    2.607471] sdhci: Copyright(c) Pierre Ossman
[    2.607578] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    2.607582] wbsd: Copyright(c) Pierre Ossman
[    2.607744] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    2.608332] usbcore: registered new interface driver vub300
[    2.608341] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.608613] ledtrig-cpu: registered to indicate activity on CPUs
[    2.609438] hid: raw HID events driver (C) Jiri Kosina
[    2.610254] usbcore: registered new interface driver usbhid
[    2.610261] usbhid: USB HID core driver
[    2.610422] drop_monitor: Initializing network drop monitor service
[    2.611047] NET: Registered protocol family 10
[    2.630958] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.653410] Segment Routing with IPv6
[    2.653505] mip6: Mobile IPv6
[    2.653516] NET: Registered protocol family 17
[    2.653574] Key type dns_resolver registered
[    2.654068] microcode: sig=0xf29, pf=0x4, revision=0x2e
[    2.654153] microcode: Microcode Update Driver: v2.2.
[    2.654169] IPI shorthand broadcast: enabled
[    2.654241] sched_clock: Marking stable (2640035338, 14061008)->(2654440581, -344235)
[    2.654528] registered taskstats version 1
[    2.654537] Loading compiled-in X.509 certificates
[    2.677797] Loaded X.509 cert 'Build time autogenerated kernel key: ed330712c8d8706af8e3f77ed8175946bcfde57e'
[    2.677893] zswap: loaded using pool lzo/zbud
[    2.678639] Key type .fscrypt registered
[    2.678645] Key type fscrypt-provisioning registered
[    2.698486] Key type encrypted registered
[    2.698502] AppArmor: AppArmor sha1 policy hashing enabled
[    2.698527] evm: Initialising EVM extended attributes:
[    2.698530] evm: security.selinux
[    2.698532] evm: security.apparmor
[    2.698533] evm: security.capability
[    2.698537] evm: HMAC attrs: 0x1
[    2.750037] ata2.00: ATAPI: _NEC CD-RW NR-9300A, 105B, max UDMA/33
[    2.751665] ata1.00: ATA-5: WDC WD400EB-75CPF0, 06.04G06, max UDMA/100
[    2.751672] ata1.00: 78165360 sectors, multi 8: LBA
[    2.774753] scsi 0:0:0:0: Direct-Access    ATA      WDC WD400EB-75CP 4G06 PQ: 0 ANSI: 5
[    2.776147] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.3 GiB)
[    2.776231] sd 0:0:0:0: [sda] Write Protect is off
[    2.776237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.776361] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.776929] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.778932] scsi 1:0:0:0: CD-ROM            _NEC    CD-RW NR-9300A  105B PQ: 0 ANSI: 5
[    2.795418] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.795427] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.813216] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.813662] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.845134] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    2.850423]  sda: sda1 sda2 sda3 sda4
[    2.854867] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.856262] Freeing unused kernel image (initmem) memory: 764K
[    2.856318] Write protecting kernel text and read-only data: 12880k
[    2.856335] rodata_test: all tests were successful
[    2.856352] Run /init as init process
[    2.856354]  with arguments:
[    2.856355]    /init
[    2.856356]  with environment:
[    2.856358]    HOME=/
[    2.856359]    TERM=linux
[    2.856361]    BOOT_IMAGE=/boot/vmlinuz-5.10.188-antix.1-486-smp
[    2.955551] udevd[121]: starting version 3.2.14
[    2.957651] random: udevd: uninitialized urandom read (16 bytes read)
[    2.957836] random: udevd: uninitialized urandom read (16 bytes read)
[    2.963043] udevd[122]: starting eudev-3.2.14
[    2.975308] usb 1-4: New USB device found, idVendor=13fe, idProduct=5200, bcdDevice= 1.10
[    2.975315] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.975318] usb 1-4: Product:               
[    2.975321] usb 1-4: Manufacturer:       
[    2.975324] usb 1-4: SerialNumber: 070737E490443527
[    2.985886] usb_storage: module verification failed: signature and/or required key missing - tainting kernel
[    2.988017] usb-storage 1-4:1.0: USB Mass Storage device detected
[    2.995191] scsi host2: usb-storage 1-4:1.0
[    2.996938] usbcore: registered new interface driver usb-storage
[    3.003288] usbcore: registered new interface driver uas
[    3.140612] Floppy drive(s): fd0 is 1.44M
[    3.143305] rtc_cmos 00:01: RTC can wake from S4
[    3.144126] rtc_cmos 00:01: registered as rtc0
[    3.144204] rtc_cmos 00:01: setting system clock to 2024-02-17T12:16:06 UTC (1708172166)
[    3.144334] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram
[    3.155129] FDC 0 is a post-1991 82077
[    3.155163] tsc: Refined TSC clocksource calibration: 2193.526 MHz
[    3.155176] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f9e4f15d2a, max_idle_ns: 440795277964 ns
[    3.155225] clocksource: Switched to clocksource tsc
[    3.176260] uhci_hcd: USB Universal Host Controller Interface driver
[    3.176775] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.176800] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.176871] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[    3.181922] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    3.181930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.181933] usb usb2: Product: UHCI Host Controller
[    3.181936] usb usb2: Manufacturer: Linux 5.10.188-antix.1-486-smp uhci_hcd
[    3.181939] usb usb2: SerialNumber: 0000:00:1d.0
[    3.185582] hub 2-0:1.0: USB hub found
[    3.185638] hub 2-0:1.0: 2 ports detected
[    3.188718] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.188771] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.188846] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[    3.190317] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    3.190324] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.190328] usb usb3: Product: UHCI Host Controller
[    3.190331] usb usb3: Manufacturer: Linux 5.10.188-antix.1-486-smp uhci_hcd
[    3.190334] usb usb3: SerialNumber: 0000:00:1d.1
[    3.192654] hub 3-0:1.0: USB hub found
[    3.193177] hub 3-0:1.0: 2 ports detected
[    3.195619] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.195649] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.195747] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    3.199318] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    3.199325] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.199329] usb usb4: Product: UHCI Host Controller
[    3.199332] usb usb4: Manufacturer: Linux 5.10.188-antix.1-486-smp uhci_hcd
[    3.199335] usb usb4: SerialNumber: 0000:00:1d.2
[    3.199836] hub 4-0:1.0: USB hub found
[    3.203170] hub 4-0:1.0: 2 ports detected
[    3.246574] i801_smbus 0000:00:1f.3: SMBus using polling
[    3.246719] i2c i2c-0: 1/2 memory slots populated (from DMI)
[    3.246726] i2c i2c-0: Memory type 0x0f not supported yet, not instantiating SPD
[    4.052265] scsi 2:0:0:0: Direct-Access                              PMAP PQ: 0 ANSI: 6
[    4.053441] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    4.054239] sd 2:0:0:0: [sdb] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
[    4.055234] sd 2:0:0:0: [sdb] Write Protect is off
[    4.055243] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 00
[    4.056194] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.271189] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[    5.132233]  sdb: sdb1
[    5.142329] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    5.147554] random: crng init done
[    5.815088] raid6: sse2x2  gen()  2397 MB/s
[    5.832074] raid6: sse2x2  xor()  1546 MB/s
[    5.849077] raid6: sse2x1  gen()  2008 MB/s
[    5.866079] raid6: sse2x1  xor()  1330 MB/s
[    5.883085] raid6: sse1x2  gen()  1271 MB/s
[    5.900093] raid6: sse1x1  gen()  1122 MB/s
[    5.900098] raid6: using algorithm sse2x2 gen() 2397 MB/s
[    5.900099] raid6: .... xor() 1546 MB/s, rmw enabled
[    5.900103] raid6: using intx1 recovery algorithm
[    5.901892] xor: measuring software checksum speed
[    5.904922]    pIII_sse        :  3316 MB/sec
[    5.907195]    prefetch64-sse  :  4356 MB/sec
[    5.907199] xor: using function: prefetch64-sse (4356 MB/sec)
[    5.948935] Btrfs loaded, crc32c=crc32c-generic, assert=on
[    6.185132] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[    6.185197] floppy: error 10 while reading block 0
[    7.668377] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  10.606395] udevd[370]: starting version 3.2.14
[  10.901839] udevd[370]: starting eudev-3.2.14
[  11.659281] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[  11.663270] ACPI: Power Button [VBTN]
[  11.663535] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[  11.663724] ACPI: Power Button [PWRF]
[  11.823905] intel_rng: FWH not detected
[  12.304944] parport_pc 00:06: reported by Plug and Play ACPI
[  12.305127] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[  12.484155] iTCO_vendor_support: vendor-support=0
[  12.906168] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  12.906261] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
[  12.909197] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  14.123905] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[  14.641314] ppdev: user-space parallel port driver
[  15.304167] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 51230 usecs (2469 samples)
[  15.304175] snd_intel8x0 0000:00:1f.5: clocking to 48000
[  17.874870] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[  17.874897] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[  17.874982] agpgart-intel 0000:00:00.0: detected 1024K stolen memory
[  17.875052] i915 0000:00:02.0: vgaarb: deactivate vga console
[  17.876509] Console: switching to colour dummy device 80x25
[  17.879885] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[  17.895339] i915 0000:00:02.0: [drm] Initialized overlay support.
[  17.895421] i915 0000:00:02.0: [drm] PMU not supported for this GPU.
[  17.896919] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[  18.038172] fbcon: i915drmfb (fb0) is primary device
[  18.100336] Console: switching to colour frame buffer device 128x48
[  18.122267] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[  22.096188] Adding 2032308k swap on /dev/sda3.  Priority:-2 extents:1 across:2032308k FS
[  22.216914] EXT4-fs (sda1): re-mounted. Opts: (null)
[  23.167262] device-mapper: uevent: version 1.0.3
[  23.169374] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[  27.100846] udevd[1364]: starting version 3.2.14
[  27.254310] udevd[1364]: starting eudev-3.2.14
[  165.105778] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  165.182287] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Reply


Messages In This Thread
Dimension 2400 mini report - by grindstone - 02-17-2024, 06:24 PM
RE: Dimension 2400 mini report - by grindstone - 02-17-2024, 09:50 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)