Login

x18 · (This post was last modified: 05-14-2024, 06:15 PM by x18.)

(05-14-2024, 12:27 PM)grindstone Wrote: We need more. What have you tried--exactly. How are you booting--exactly. xorg=siliconmotion? vesa? fbdev? nothing?

I'm booting with nothing, just appending "3" in the grub file. Then I run "sudo Xorg -configure".

Quote:What versions of the existing driver

xf86-video-siliconmotion 1.7.9

Quote:and what version you built (1.7.9.10?)

xf86-video-siliconmotion 1.7.10

Quote:As an old linux person, you know the drill.

Yes, I'm an old newbie and the "Debian side" of Linux is mostly unknown to me.

Quote:Read the boot logs carefully--what files are not found--anything kernel-related? Have you upgraded kernels--do the versions match in the Xorg log?

Mine is a from-scratch installation. Just downloaded the DSL iso image, then run "apt upgrade".

Quote:In fact, just post that stuff:

sudo inxi -Fxv6

Code:
System:

  Host: arpan Kernel: 5.10.188-antix.1-486-smp arch: i686 bits: 32

    compiler: gcc v: 13.2.0 Console: tty 1 Distro: antiX-23-runit_386-base

    Arditi del Popolo 26 August 2023 base: Debian GNU/Linux 12 (bookworm)

Machine:

  Type: Laptop System: ASUSTeK product: L7300 series Notebook PC

    v: CPU Module, VGA Board serial: 000000000 Chassis: type: 10 v: T5

    serial: N/A

  Mobo: ASUSTeK model: L7300 Main Board v: 2.1 serial: NS170000000000

    BIOS: Phoenix v: 0214 date: 11/04/99

Memory:

  System RAM: total: 192 MiB available: 142.8 MiB used: 42.4 MiB (29.7%)

    igpu: 128 KiB

  Array-1: capacity: 384 MiB slots: 3 modules: 0 EC: None

    max-module-size: 128 MiB

  Device-1: On Board info: single-bank type: N/A size: 32 MiB speed: N/A

    volts: N/A manufacturer: N/A part-no: N/A

  Device-2: DIMM1 info: single-bank type: N/A size: 64 MiB speed: N/A

    volts: N/A manufacturer: N/A part-no: N/A

CPU:

  Info: single core model: Mobile Pentium II bits: 32 arch: P6 II Mendocino

    rev: A cache: L1: 16 KiB L2: 256 KiB note: check

  Speed (MHz): 301 min/max: N/A core: 1: 301 bogomips: 601

  Flags: pae

Graphics:

  Device-1: Silicon Motion SM910 driver: N/A bus-ID: 00:02.0

    chip-ID: 126f:0910

  Display: server: X.org v: 1.21.1.7 driver: X:

    loaded: fbdev,modesetting,vesa unloaded: siliconmotion gpu: N/A tty: 80x25

  API: EGL v: 1.5 platforms: device: 0 drv: swrast surfaceless: drv: swrast

    inactive: gbm,wayland,x11

  API: OpenGL Message: GL data unavailable in console for root.

Audio:

  Message: No device data found.

  API: ALSA v: k5.10.188-antix.1-486-smp status: inactive with: apulse

    type: pulse-emulator

  Server-1: JACK v: 1.9.21 status: off

Network:

  Device-1: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: N/A

    port: N/A bus-ID: 00:07.3 chip-ID: 8086:7113

  IF-ID-1: eth0 state: down mac: 00:00:b4:4e:19:63

Drives:

  Local Storage: total: 18.63 GiB used: 2.91 GiB (15.6%)

  ID-1: /dev/sda vendor: Hitachi model: DK23DA-20 size: 18.63 GiB

    speed: <unknown> serial: 143XCL

  Floppy-1: /dev/fd0

  Optical-1: /dev/sr0 vendor: TEAC model: CD-224E rev: 1.0A dev-links: cdrom

  Features: speed: 24 multisession: yes audio: yes dvd: no rw: none

    state: running

Partition:

  ID-1: / size: 6.73 GiB used: 2.91 GiB (43.3%) fs: ext4 dev: /dev/sda2

    label: N/A uuid: c415446e-f006-456b-94a9-f03fc1a2865a

Swap:

  Alert: No swap data was found.

Unmounted:

  ID-1: /dev/sda1 size: 6.83 GiB fs: vfat label: N/A uuid: B00E-5F21

  ID-2: /dev/sda3 size: 1 KiB fs: N/A label: N/A uuid: N/A

  ID-3: /dev/sda4 size: 4.47 GiB fs: vfat label: N/A uuid: 1C95-E562

  ID-4: /dev/sda5 size: 399.8 MiB fs: N/A label: N/A uuid: N/A

USB:

  Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s

    lanes: 1 chip-ID: 1d6b:0001

Sensors:

  Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon

    or lm-sensors.

Info:

  Processes: 73 Uptime: 16m Init: runit v: N/A runlevel: 2 Compilers:

  gcc: 12.2.0 alt: 12 Packages: pm: dpkg pkgs: 1271 Shell: Bash v: 5.2.15

  running-in: tty 1 inxi: 3.3.31

Quote:sudo dmesg

Code:
[    0.000000] Linux version 5.10.188-antix.1-486-smp (root@antix1) (gcc (Debian 13.2.0-1) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41) #1 SMP Tue Aug 1 00:54:36 EEST 2023

[    0.000000] x86/fpu: x87 FPU will use FXSAVE

[    0.000000] BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e9c00-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009feffff] usable

[    0.000000] BIOS-e820: [mem 0x0000000009ff0000-0x0000000009fffbff] ACPI data

[    0.000000] BIOS-e820: [mem 0x0000000009fffc00-0x0000000009ffffff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000fffe9c00-0x00000000ffffffff] reserved

[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!

[    0.000000] SMBIOS 2.1 present.

[    0.000000] DMI: ASUSTeK Computer Inc. L7300 series Notebook PC/L7300 Main Board, BIOS 0214 11/04/99

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] tsc: Detected 300.694 MHz processor

[    0.010856] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.010904] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.010971] last_pfn = 0x9ff0 max_arch_pfn = 0x100000

[    0.011007] MTRR default type: uncachable

[    0.011019] MTRR fixed ranges enabled:

[    0.011036]   00000-9FFFF write-back

[    0.011051]   A0000-BFFFF uncachable

[    0.011065]   C0000-C7FFF write-protect

[    0.011080]   C8000-EFFFF uncachable

[    0.011094]   F0000-FFFFF write-protect

[    0.011105] MTRR variable ranges enabled:

[    0.011124]   0 base 000000000 mask FF8000000 write-back

[    0.011141]   1 base 008000000 mask FFE000000 write-back

[    0.011151]   2 disabled

[    0.011161]   3 disabled

[    0.011171]   4 disabled

[    0.011180]   5 disabled

[    0.011190]   6 disabled

[    0.011200]   7 disabled

[    0.012350] x86/PAT: PAT not supported by the CPU.

[    0.013080] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  

[    0.096534] initial memory mapped: [mem 0x00000000-0x063fffff]

[    0.096873] RAMDISK: [mem 0x06e82000-0x094c4fff]

[    0.096953] ACPI: Early table checksum verification disabled

[    0.096989] ACPI: RSDP 0x00000000000F6FD0 000014 (v00 PTLTD )

[    0.097041] ACPI: RSDT 0x0000000009FFD254 00002C (v01 PTLTD    RSDT   00000000  LTP 00000000)

[    0.097106] ACPI: FACP 0x0000000009FFFB65 000074 (v01 ASUS   L7300    00000000 PTL  000F4240)

[    0.097179] ACPI: DSDT 0x0000000009FFD280 0028E5 (v01 ASUS   Lotus    00000001 MSFT 01000004)

[    0.097234] ACPI: FACS 0x0000000009FFFFC0 000040

[    0.097278] ACPI: BOOT 0x0000000009FFFBD9 000027 (v01 PTLTD  $SBFTBL$ 00000000  LTP 00000001)

[    0.097332] ACPI: Reserving FACP table memory at [mem 0x9fffb65-0x9fffbd8]

[    0.097351] ACPI: Reserving DSDT table memory at [mem 0x9ffd280-0x9fffb64]

[    0.097367] ACPI: Reserving FACS table memory at [mem 0x9ffffc0-0x9ffffff]

[    0.097383] ACPI: Reserving BOOT table memory at [mem 0x9fffbd9-0x9fffbff]

[    0.097532] 0MB HIGHMEM available.

[    0.097546] 159MB LOWMEM available.

[    0.097558]   mapped low ram: 0 - 09ff0000

[    0.097569]   low ram: 0 - 09ff0000

[    0.097651] Zone ranges:

[    0.097664]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.097688]   Normal   [mem 0x0000000001000000-0x0000000009feffff]

[    0.097711]   HighMem  empty

[    0.097728] Movable zone start for each node

[    0.097738] Early memory node ranges

[    0.097754]   node   0: [mem 0x0000000000001000-0x000000000009efff]

[    0.097770]   node   0: [mem 0x0000000000100000-0x0000000009feffff]

[    0.097789] Initmem setup node 0 [mem 0x0000000000001000-0x0000000009feffff]

[    0.097808] On node 0 totalpages: 40846

[    0.097823]   DMA zone: 40 pages used for memmap

[    0.097835]   DMA zone: 0 pages reserved

[    0.097850]   DMA zone: 3998 pages, LIFO batch:0

[    0.097866]   Normal zone: 360 pages used for memmap

[    0.097880]   Normal zone: 36848 pages, LIFO batch:7

[    0.097947] On node 0, zone DMA: 1 pages in unavailable ranges

[    0.099050] On node 0, zone DMA: 97 pages in unavailable ranges

[    0.113354] On node 0, zone Normal: 8208 pages in unavailable ranges

[    0.113415] Using APIC driver default

[    0.113571] ACPI: PM-Timer IO Port: 0x8008

[    0.113606] Local APIC disabled by BIOS -- you can enable it with "lapic"

[    0.113616] APIC: disable apic facility

[    0.113626] APIC: switched to apic NOOP

[    0.113646] smpboot: Allowing 1 CPUs, 0 hotplug CPUs

[    0.113750] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.113771] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[    0.113785] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e9fff]

[    0.113799] PM: hibernation: Registered nosave memory: [mem 0x000ea000-0x000fffff]

[    0.113826] [mem 0x0a000000-0xfffe9bff] available for PCI devices

[    0.113841] Booting paravirtualized kernel on bare hardware

[    0.113878] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns

[    0.113958] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1

[    0.115880] percpu: Embedded 35 pages/cpu s112460 r0 d30900 u143360

[    0.115944] pcpu-alloc: s112460 r0 d30900 u143360 alloc=35*4096

[    0.115970] pcpu-alloc: [0] 0 

[    0.116146] Built 1 zonelists, mobility grouping on.  Total pages: 40446

[    0.116170] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.188-antix.1-486-smp root=UUID=c415446e-f006-456b-94a9-f03fc1a2865a ro quiet selinux=0 3

[    0.118235] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)

[    0.118614] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)

[    0.118809] microcode: microcode updated early to revision 0xd, date = 1999-05-05

[    0.118841] mem auto-init: stack:off, heap alloc:off, heap free:off

[    0.118883] Initializing HighMem for node 0 (00000000:00000000)

[    0.118909] Initializing Movable for node 0 (00000000:00000000)

[    0.133670] Memory: 106276K/163384K available (9973K kernel code, 1209K rwdata, 2904K rodata, 764K init, 480K bss, 57108K reserved, 0K cma-reserved, 0K highmem)

[    0.133691] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[    0.138533] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[    0.140607] rcu: Hierarchical RCU implementation.

[    0.140636] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.

[    0.140660] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.

[    0.140673] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1

[    0.152083] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16

[    0.153029] rcu:     Offload RCU callbacks from CPUs: (none).

[    0.158003] Console: colour VGA+ 80x25

[    0.158282] printk: console [tty0] enabled

[    0.158348] ACPI: Core revision 20200925

[    0.158852] APIC: Keep in PIC mode(8259)

[    0.158895] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x4559684db7, max_idle_ns: 440795216680 ns

[    0.158941] Calibrating delay loop (skipped), value calculated using timer frequency.. 601.38 BogoMIPS (lpj=300694)

[    0.158980] pid_max: default: 32768 minimum: 301

[    0.160599] LSM: Security Framework initializing

[    0.160822] Yama: becoming mindful.

[    0.161403] AppArmor: AppArmor initialized

[    0.161976] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)

[    0.162020] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)

[    0.166327] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2

[    0.166351] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0

[    0.166386] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[    0.166411] Spectre V2 : Mitigation: Retpolines

[    0.166422] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[    0.166434] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT

[    0.166447] Speculative Store Bypass: Vulnerable

[    0.166459] L1TF: Kernel not compiled for PAE. No mitigation for L1TF

[    0.166482] MDS: Vulnerable: Clear CPU buffers attempted, no microcode

[    0.166493] MMIO Stale Data: Unknown: No mitigations

[    0.204224] Freeing SMP alternatives memory: 36K

[    0.212142] smpboot: weird, boot CPU (#0) not listed by the BIOS

[    0.212165] smpboot: SMP disabled

[    0.214372] Performance Events: 

[    0.214398] no APIC, boot with the "lapic" boot parameter to force-enable it.

[    0.214411] no hardware sampling interrupt available.

[    0.214429] p6 PMU driver.

[    0.214445] ... version:                0

[    0.214457] ... bit width:              32

[    0.214467] ... generic registers:      2

[    0.214480] ... value mask:             00000000ffffffff

[    0.214491] ... max period:             000000007fffffff

[    0.214501] ... fixed-purpose events:   0

[    0.214511] ... event mask:             0000000000000003

[    0.215639] rcu: Hierarchical SRCU implementation.

[    0.218723] smp: Bringing up secondary CPUs ...

[    0.218748] smp: Brought up 1 node, 1 CPU

[    0.218762] smpboot: Max logical packages: 1

[    0.218780] smpboot: Total of 1 processors activated (601.38 BogoMIPS)

[    0.220135] devtmpfs: initialized

[    0.224116] PM: Registering ACPI NVS region [mem 0x09fffc00-0x09ffffff] (1024 bytes)

[    0.224849] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns

[    0.224890] futex hash table entries: 256 (order: 2, 16384 bytes, linear)

[    0.225629] prandom: seed boundary self test passed

[    0.234567] prandom: 100 self tests passed

[    0.312683] prandom32: self test passed (less than 6 bits correlated)

[    0.312699] pinctrl core: initialized pinctrl subsystem

[    0.316817] NET: Registered protocol family 16

[    0.318788] audit: initializing netlink subsys (disabled)

[    0.321605] thermal_sys: Registered thermal governor 'fair_share'

[    0.321621] thermal_sys: Registered thermal governor 'bang_bang'

[    0.321635] thermal_sys: Registered thermal governor 'step_wise'

[    0.321646] thermal_sys: Registered thermal governor 'user_space'

[    0.321704] cpuidle: using governor ladder

[    0.321722] cpuidle: using governor menu

[    0.322511] Simple Boot Flag at 0x36 set to 0x1

[    0.322579] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns

[    0.322719] ACPI: bus type PCI registered

[    0.322741] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.323002] audit: type=2000 audit(1715708188.160:1): state=initialized audit_enabled=0 res=1

[    0.326534] PCI: PCI BIOS revision 2.10 entry at 0xfd9d6, last bus=0

[    0.326550] PCI: Using configuration type 1 for base access

[    0.356783] Kprobes globally optimized

[    0.358462] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages

[    0.378013] ACPI: Added _OSI(Module Device)

[    0.378035] ACPI: Added _OSI(Processor Device)

[    0.378051] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.378067] ACPI: Added _OSI(Processor Aggregator Device)

[    0.378086] ACPI: Added _OSI(Linux-Dell-Video)

[    0.378104] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

[    0.378123] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)

[    0.401609] ACPI: 1 ACPI AML tables successfully acquired and loaded

[    0.407008] ACPI: EC: EC started

[    0.407023] ACPI: EC: interrupt blocked

[    0.407202] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.407228] ACPI: \_SB_.PCI0.ISA_.EC0_: Boot DSDT EC used to handle transactions

[    0.407238] ACPI: Interpreter enabled

[    0.407512] ACPI: (supports S0 S1 S3 S4 S5)

[    0.407528] ACPI: Using PIC for interrupt routing

[    0.407735] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug

[    0.409214] ACPI: Enabled 2 GPEs in block 00 to 0F

[    0.470667] ACPI: Power Resource [PFAN] (off)

[    0.474618] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)

[    0.475595] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.

[    0.476568] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.

[    0.477538] ACPI: PCI Interrupt Link [LNKD] (IRQs 11) *0, disabled.

[    0.481845] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.481904] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI EDR HPX-Type3]

[    0.482015] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.

[    0.482791] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)

[    0.482816] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)

[    0.482836] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)

[    0.482856] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)

[    0.482876] acpi PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff window] (ignored)

[    0.482952] acpi PNP0A03:00: host bridge window [mem 0x0a000000-0xffdfffff window] (ignored)

[    0.482968] PCI: root bus 00: using default resources

[    0.483507] PCI host bridge to bus 0000:00

[    0.483537] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]

[    0.483560] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]

[    0.483583] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.483701] pci 0000:00:00.0: [8086:7192] type 00 class 0x060000

[    0.483751] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]

[    0.484471] pci 0000:00:02.0: [126f:0910] type 00 class 0x030000

[    0.484528] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff]

[    0.485339] pci 0000:00:07.0: [8086:7110] type 00 class 0x060100

[    0.486382] pci 0000:00:07.1: [8086:7111] type 00 class 0x010180

[    0.486492] pci 0000:00:07.1: reg 0x20: [io  0xfcf0-0xfcff]

[    0.486547] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]

[    0.486565] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io  0x03f6]

[    0.486583] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]

[    0.486601] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io  0x0376]

[    0.487139] pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300

[    0.487229] pci 0000:00:07.2: reg 0x20: [io  0xfcc0-0xfcdf]

[    0.488138] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,

               * this clock source is slow. Consider trying other clock sources

[    0.488170] pci 0000:00:07.3: [8086:7113] type 00 class 0x068000

[    0.488351] pci 0000:00:07.3: quirk: [io  0x8000-0x803f] claimed by PIIX4 ACPI

[    0.488377] pci 0000:00:07.3: quirk: [io  0x2180-0x218f] claimed by PIIX4 SMB

[    0.488988] pci 0000:00:0a.0: proprietary Ricoh MMC controller disabled (via CardBus function)

[    0.489008] pci 0000:00:0a.0: MMC cards are now supported by standard SDHCI controller

[    0.489035] pci 0000:00:0a.0: [1180:0476] type 02 class 0x060700

[    0.489087] pci 0000:00:0a.0: reg 0x10: [mem 0x00000000-0x00000fff]

[    0.489201] pci 0000:00:0a.0: supports D2

[    0.489223] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold

[    0.489788] pci 0000:00:0a.1: [1180:0476] type 02 class 0x060700

[    0.489842] pci 0000:00:0a.1: reg 0x10: [mem 0x00000000-0x00000fff]

[    0.489996] pci 0000:00:0a.1: supports D2

[    0.490018] pci 0000:00:0a.1: PME# supported from D0 D3hot D3cold

[    0.490608] pci 0000:00:0a.0: bridge configuration invalid ([bus 00-00]), reconfiguring

[    0.490645] pci 0000:00:0a.1: bridge configuration invalid ([bus 00-00]), reconfiguring

[    0.490722] pci_bus 0000:01: extended config space not accessible

[    0.490907] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04

[    0.491075] pci_bus 0000:05: extended config space not accessible

[    0.491261] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08

[    0.491292] pci_bus 0000:00: on NUMA node 0

[    0.512566] ACPI: EC: interrupt unblocked

[    0.512585] ACPI: EC: event unblocked

[    0.512606] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.512616] ACPI: EC: GPE=0x9

[    0.512644] ACPI: \_SB_.PCI0.ISA_.EC0_: Boot DSDT EC initialization complete

[    0.512664] ACPI: \_SB_.PCI0.ISA_.EC0_: EC: Used to handle transactions and events

[    0.513374] iommu: Default domain type: Translated 

[    0.513832] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[    0.513856] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[    0.513889] pci 0000:00:02.0: vgaarb: bridge control possible

[    0.513950] vgaarb: loaded

[    0.516373] SCSI subsystem initialized

[    0.517060] libata version 3.00 loaded.

[    0.517374] ACPI: bus type USB registered

[    0.517628] usbcore: registered new interface driver usbfs

[    0.517820] usbcore: registered new interface driver hub

[    0.517983] usbcore: registered new device driver usb

[    0.518469] EDAC MC: Ver: 3.0.0

[    0.522384] NetLabel: Initializing

[    0.522406] NetLabel:  domain hash size = 128

[    0.522415] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO

[    0.522667] NetLabel:  unlabeled traffic allowed by default

[    0.522691] PCI: Using ACPI for IRQ routing

[    0.522709] PCI: pci_cache_line_size set to 32 bytes

[    0.522812] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]

[    0.522833] e820: reserve RAM buffer [mem 0x09ff0000-0x0bffffff]

[    0.557230] clocksource: Switched to clocksource tsc-early

[    0.739559] VFS: Disk quotas dquot_6.6.0

[    0.739899] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.741944] AppArmor: AppArmor Filesystem Enabled

[    0.742259] pnp: PnP ACPI init

[    0.748438] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved

[    0.748474] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved

[    0.748500] system 00:00: [mem 0x00100000-0x09ffffff] could not be reserved

[    0.748578] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.749509] system 00:01: [io  0x04d0-0x04d1] has been reserved

[    0.749548] system 00:01: [io  0x0250-0x0252] has been reserved

[    0.749574] system 00:01: [io  0x2180-0x218f] has been reserved

[    0.749600] system 00:01: [io  0x8000-0x803f] has been reserved

[    0.749690] system 00:01: [mem 0xfff80000-0xffffffff] could not be reserved

[    0.749763] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.750212] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.750739] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)

[    0.751150] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)

[    0.788354] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)

[    0.812720] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.846331] pnp 00:07: [dma 2]

[    0.851239] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)

[    0.851342] pnp: PnP ACPI: found 8 devices

[    0.851389] PnPBIOS: Disabled

[    0.910946] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.912295] NET: Registered protocol family 2

[    0.912911] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)

[    0.915535] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)

[    0.916067] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)

[    0.916136] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)

[    0.916232] TCP: Hash tables configured (established 2048 bind 2048)

[    0.916738] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)

[    0.916811] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)

[    0.917534] NET: Registered protocol family 1

[    0.917841] pci 0000:00:0a.0: BAR 0: assigned [mem 0x0c000000-0x0c000fff]

[    0.917884] pci 0000:00:0a.0: BAR 15: assigned [mem 0x10000000-0x13ffffff pref]

[    0.917912] pci 0000:00:0a.0: BAR 16: assigned [mem 0x14000000-0x17ffffff]

[    0.917939] pci 0000:00:0a.1: BAR 0: assigned [mem 0x18000000-0x18000fff]

[    0.917972] pci 0000:00:0a.1: BAR 15: assigned [mem 0x1c000000-0x1fffffff pref]

[    0.918000] pci 0000:00:0a.1: BAR 16: assigned [mem 0x20000000-0x23ffffff]

[    0.918031] pci 0000:00:0a.0: BAR 13: assigned [io  0x1000-0x10ff]

[    0.918059] pci 0000:00:0a.0: BAR 14: assigned [io  0x1400-0x14ff]

[    0.918087] pci 0000:00:0a.1: BAR 13: assigned [io  0x1800-0x18ff]

[    0.918115] pci 0000:00:0a.1: BAR 14: assigned [io  0x1c00-0x1cff]

[    0.918159] pci 0000:00:0a.0: CardBus bridge to [bus 01-04]

[    0.918178] pci 0000:00:0a.0:   bridge window [io  0x1000-0x10ff]

[    0.918200] pci 0000:00:0a.0:   bridge window [io  0x1400-0x14ff]

[    0.918223] pci 0000:00:0a.0:   bridge window [mem 0x10000000-0x13ffffff pref]

[    0.918246] pci 0000:00:0a.0:   bridge window [mem 0x14000000-0x17ffffff]

[    0.918268] pci 0000:00:0a.1: CardBus bridge to [bus 05-08]

[    0.918287] pci 0000:00:0a.1:   bridge window [io  0x1800-0x18ff]

[    0.918308] pci 0000:00:0a.1:   bridge window [io  0x1c00-0x1cff]

[    0.918331] pci 0000:00:0a.1:   bridge window [mem 0x1c000000-0x1fffffff pref]

[    0.918353] pci 0000:00:0a.1:   bridge window [mem 0x20000000-0x23ffffff]

[    0.918381] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]

[    0.918401] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]

[    0.918422] pci_bus 0000:01: resource 0 [io  0x1000-0x10ff]

[    0.918441] pci_bus 0000:01: resource 1 [io  0x1400-0x14ff]

[    0.918461] pci_bus 0000:01: resource 2 [mem 0x10000000-0x13ffffff pref]

[    0.918481] pci_bus 0000:01: resource 3 [mem 0x14000000-0x17ffffff]

[    0.918501] pci_bus 0000:05: resource 0 [io  0x1800-0x18ff]

[    0.918520] pci_bus 0000:05: resource 1 [io  0x1c00-0x1cff]

[    0.918540] pci_bus 0000:05: resource 2 [mem 0x1c000000-0x1fffffff pref]

[    0.918560] pci_bus 0000:05: resource 3 [mem 0x20000000-0x23ffffff]

[    0.919211] pci 0000:00:00.0: Limiting direct PCI/PCI transfers

[    0.919298] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.919396] pci 0000:00:07.2: enabling device (0000 -> 0001)

[    0.922926] PCI Interrupt Link [LNKD] enabled at IRQ 11

[    0.922946] PCI: setting IRQ 11 as level-triggered

[    0.923295] PCI: CLS 0 bytes, default 32

[    0.924052] Trying to unpack rootfs image as initramfs...

[    8.379353] Freeing initrd memory: 39180K

[    8.385041] Initialise system trusted keyrings

[    8.385667] workingset: timestamp_bits=14 max_order=16 bucket_order=2

[    8.409011] zbud: loaded

[    8.414598] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    8.415804] ntfs: driver 2.1.32 [Flags: R/W].

[    8.416973] fuse: init (API version 7.32)

[    8.561196] Key type asymmetric registered

[    8.561221] Asymmetric key parser 'x509' registered

[    8.561341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

[    8.562100] io scheduler mq-deadline registered

[    8.566054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[    8.566958] tsc: Marking TSC unstable due to TSC halts in idle

[    8.567602] clocksource: Switched to clocksource acpi_pm

[    8.569995] isapnp: Scanning for PnP cards...

[    8.669025]  01:01: card 'YAMAHA OPL3-SAx Audio System'

[    8.669044] isapnp: 1 Plug & Play card detected total

[    8.670179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    8.671125] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    8.696033] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 8250

[    8.700296] Linux agpgart interface v0.103

[    8.757468] brd: module loaded

[    8.813262] loop: module loaded

[    8.815713] ata_piix 0000:00:07.1: version 2.13

[    8.820104] scsi host0: ata_piix

[    8.822326] scsi host1: ata_piix

[    8.823015] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14

[    8.823036] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15

[    8.829619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    8.829641] ehci-pci: EHCI PCI platform driver

[    8.829813] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    8.830374] ohci-pci: OHCI PCI platform driver

[    8.830533] ohci-platform: OHCI generic platform driver

[    8.831659] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12

[    8.837175] serio: i8042 KBD port at 0x60,0x64 irq 1

[    8.837244] serio: i8042 AUX port at 0x60,0x64 irq 12

[    8.838835] mousedev: PS/2 mouse device common for all mice

[    8.839646] intel_pstate: CPU model not supported

[    8.839817] sdhci: Secure Digital Host Controller Interface driver

[    8.839828] sdhci: Copyright(c) Pierre Ossman

[    8.840273] wbsd: Winbond W83L51xD SD/MMC card interface driver

[    8.840285] wbsd: Copyright(c) Pierre Ossman

[    8.840628] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400

[    8.842272] usbcore: registered new interface driver vub300

[    8.842305] sdhci-pltfm: SDHCI platform and OF driver helper

[    8.843124] ledtrig-cpu: registered to indicate activity on CPUs

[    8.844936] hid: raw HID events driver (C) Jiri Kosina

[    8.847102] usbcore: registered new interface driver usbhid

[    8.847117] usbhid: USB HID core driver

[    8.847424] drop_monitor: Initializing network drop monitor service

[    8.850677] NET: Registered protocol family 10

[    8.874613] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    8.979212] ata1.00: ATA-5: HITACHI_DK23DA-20, 00J2A0A1, max UDMA/100

[    8.979244] ata1.00: 39070080 sectors, multi 16: LBA 

[    8.986118] scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23DA-2 A0A1 PQ: 0 ANSI: 5

[    8.989318] scsi 0:0:0:0: Attached scsi generic sg0 type 0

[    8.992733] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)

[    8.993016] sd 0:0:0:0: [sda] Write Protect is off

[    8.993042] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    8.993313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    9.003730] ata2.00: ATAPI: CD-224E, 1.0A, max MWDMA2

[    9.005632] Segment Routing with IPv6

[    9.006010] mip6: Mobile IPv6

[    9.006037] NET: Registered protocol family 17

[    9.006312] Key type dns_resolver registered

[    9.009110] microcode: sig=0x66a, pf=0x8, revision=0xd

[    9.009150] microcode: Microcode Update Driver: v2.2.

[    9.009171] IPI shorthand broadcast: enabled

[    9.010348] registered taskstats version 1

[    9.010382] Loading compiled-in X.509 certificates

[    9.028583] scsi 1:0:0:0: CD-ROM            TEAC     CD-224E          1.0A PQ: 0 ANSI: 5

[    9.046200] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x xa/form2 cdda tray

[    9.046231] cdrom: Uniform CD-ROM driver Revision: 3.20

[    9.066378] sr 1:0:0:0: Attached scsi CD-ROM sr0

[    9.067605] sr 1:0:0:0: Attached scsi generic sg1 type 5

[    9.106047] Loaded X.509 cert 'Build time autogenerated kernel key: ed330712c8d8706af8e3f77ed8175946bcfde57e'

[    9.106356] zswap: loaded using pool lzo/zbud

[    9.108247] Key type .fscrypt registered

[    9.108266] Key type fscrypt-provisioning registered

[    9.173741] Key type encrypted registered

[    9.173785] AppArmor: AppArmor sha1 policy hashing enabled

[    9.173849] evm: Initialising EVM extended attributes:

[    9.173960] evm: security.selinux

[    9.173970] evm: security.apparmor

[    9.173980] evm: security.capability

[    9.173995] evm: HMAC attrs: 0x1

[    9.177497] Unstable clock detected, switching default tracing clock to "global"

               If you want to keep using the local clock, then add:

                 "trace_clock=local"

               on the kernel command line

[    9.778442]  sda: sda1 sda2 sda3 < sda5 > sda4

[    9.786860] sd 0:0:0:0: [sda] Attached SCSI disk

[    9.793386] Freeing unused kernel image (initmem) memory: 764K

[    9.793721] Write protecting kernel text and read-only data: 12880k

[    9.793763] rodata_test: all tests were successful

[    9.793818] Run /init as init process

[    9.793827]   with arguments:

[    9.793836]     /init

[    9.793845]     3

[    9.793854]   with environment:

[    9.793986]     HOME=/

[    9.793996]     TERM=linux

[    9.794006]     BOOT_IMAGE=/boot/vmlinuz-5.10.188-antix.1-486-smp

[   11.169281] udevd[124]: starting version 3.2.14

[   11.175264] random: udevd: uninitialized urandom read (16 bytes read)

[   11.175679] random: udevd: uninitialized urandom read (16 bytes read)

[   11.193650] udevd[125]: starting eudev-3.2.14

[   11.594242] floppy: module verification failed: signature and/or required key missing - tainting kernel

[   11.634598] rtc_cmos 00:02: registered as rtc0

[   11.634712] rtc_cmos 00:02: setting system clock to 2024-05-14T17:36:40 UTC (1715708200)

[   11.635096] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram

[   11.639596] Floppy drive(s): fd0 is 1.44M

[   11.655305] FDC 0 is a post-1991 82077

[   11.699195] battery: ACPI: Battery Slot [BAT0] (battery absent)

[   11.819519] thermal LNXTHERM:00: registered as thermal_zone0

[   11.819549] ACPI: Thermal Zone [THRM] (37 C)

[   11.902127] uhci_hcd: USB Universal Host Controller Interface driver

[   11.902745] uhci_hcd 0000:00:07.2: UHCI Host Controller

[   11.902820] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1

[   11.903046] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000fcc0

[   11.909729] ACPI Warning: SystemIO range 0x0000000000002180-0x0000000000002188 conflicts with OpRegion 0x0000000000002186-0x0000000000002186 (\SM06) (20200925/utaddress-204)

[   11.909802] ACPI Warning: SystemIO range 0x0000000000002180-0x0000000000002188 conflicts with OpRegion 0x0000000000002185-0x0000000000002185 (\SM05) (20200925/utaddress-204)

[   11.909970] ACPI Warning: SystemIO range 0x0000000000002180-0x0000000000002188 conflicts with OpRegion 0x0000000000002184-0x0000000000002184 (\SM04) (20200925/utaddress-204)

[   11.913454] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10

[   11.913487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   11.913507] usb usb1: Product: UHCI Host Controller

[   11.913526] usb usb1: Manufacturer: Linux 5.10.188-antix.1-486-smp uhci_hcd

[   11.913543] usb usb1: SerialNumber: 0000:00:07.2

[   11.914452] ACPI Warning: SystemIO range 0x0000000000002180-0x0000000000002188 conflicts with OpRegion 0x0000000000002183-0x0000000000002183 (\SM03) (20200925/utaddress-204)

[   11.914519] ACPI Warning: SystemIO range 0x0000000000002180-0x0000000000002188 conflicts with OpRegion 0x0000000000002182-0x0000000000002182 (\SM02) (20200925/utaddress-204)

[   11.914571] ACPI Warning: SystemIO range 0x0000000000002180-0x0000000000002188 conflicts with OpRegion 0x0000000000002180-0x0000000000002180 (\SM00) (20200925/utaddress-204)

[   11.914627] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[   11.920369] hub 1-0:1.0: USB hub found

[   11.922075] hub 1-0:1.0: 2 ports detected

[   12.250083] random: crng init done

[   13.032807] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2

[   14.271007] raid6: mmxx2    gen()   278 MB/s

[   14.287932] raid6: mmxx1    gen()   247 MB/s

[   14.305049] raid6: int32x8  gen()    83 MB/s

[   14.321953] raid6: int32x8  xor()    49 MB/s

[   14.339016] raid6: int32x4  gen()    82 MB/s

[   14.355952] raid6: int32x4  xor()    51 MB/s

[   14.373015] raid6: int32x2  gen()    82 MB/s

[   14.389948] raid6: int32x2  xor()    57 MB/s

[   14.407106] raid6: int32x1  gen()    80 MB/s

[   14.424024] raid6: int32x1  xor()    50 MB/s

[   14.424039] raid6: using algorithm mmxx2 gen() 278 MB/s

[   14.424052] raid6: using intx1 recovery algorithm

[   14.430148] xor: measuring software checksum speed

[   14.442742]    pII_mmx         :   787 MB/sec

[   14.454782]    p5_mmx          :   819 MB/sec

[   14.454796] xor: using function: p5_mmx (819 MB/sec)

[   14.677076] Btrfs loaded, crc32c=crc32c-generic, assert=on

[   14.997050] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0

[   14.997185] floppy: error 10 while reading block 0

[   16.635519] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)

[   21.852687] udevd[374]: starting version 3.2.14

[   22.392525] udevd[374]: starting eudev-3.2.14

[   23.899054] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3

[   23.903236] ACPI: Lid Switch [LID]

[   23.903846] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4

[   23.904324] ACPI: Sleep Button [SLPB]

[   23.911255] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5

[   23.913275] ACPI: Power Button [PWRF]

[   24.070672] ACPI: AC Adapter [AC] (on-line)

[   24.095697] PCI Interrupt Link [LNKA] enabled at IRQ 9

[   24.095724] PCI: setting IRQ 9 as level-triggered

[   24.095811] yenta_cardbus 0000:00:0a.0: CardBus bridge found [0000:0000]

[   24.189574] parport_pc 00:05: reported by Plug and Play ACPI

[   24.189992] parport0: PC-style at 0x378, irq 7 [PCSPP]

[   24.240606] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0438, PCI irq 9

[   24.240636] yenta_cardbus 0000:00:0a.0: Socket status: 30000450

[   24.276379] PCI Interrupt Link [LNKB] enabled at IRQ 9

[   24.276489] yenta_cardbus 0000:00:0a.1: CardBus bridge found [0000:0000]

[   24.400472] yenta_cardbus 0000:00:0a.1: ISA IRQ mask 0x0438, PCI irq 9

[   24.400503] yenta_cardbus 0000:00:0a.1: Socket status: 30000046

[   25.144060] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0

[   26.314145] ppdev: user-space parallel port driver

[   26.913570] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:

[   26.914782] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:

[   26.917239]  excluding 0x170-0x177 0x1f0-0x1f7 0x210-0x217 0x250-0x257 0x2f8-0x2ff 0x370-0x37f

[   26.918685] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:

[   26.919719]  excluding 0x170-0x177 0x1f0-0x1f7 0x210-0x217 0x250-0x257 0x2f8-0x2ff 0x370-0x37f

[   26.921263] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:

[   26.921836]  excluding

[   26.926372]  excluding 0x3f0-0x3ff 0x4d0-0x4d7

[   26.927349] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:

[   26.928528]  0x3f0-0x3ff 0x4d0-0x4d7

[   26.929448] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:

[   26.930505]  clean

[   26.930708] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:

[   26.931420]  clean

[   26.931638] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:

[   26.932945]  clean

[   26.936735]  clean

[   26.937308] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:

[   26.937350]  excluding 0xc0000-0xcbfff 0xe8000-0xfffff

[   26.937620] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:

[   26.937728]  clean

[   26.938187] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:

[   26.938226]  excluding 0xc0000-0xcbfff 0xe8000-0xfffff

[   26.938501] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:

[   26.938607]  clean

[   26.938784] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:

[   26.939098] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:

[   26.939205]  clean

[   26.939409] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:

[   26.940066]  clean

[   26.940287] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:

[   26.941356]  excluding 0xa78-0xa7f

[   26.943227]  excluding 0xa78-0xa7f

[   26.944068] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:

[   26.961519]  clean

[   26.962042] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 3)

[   27.859238] pcnet_cs 0.0 eth0: NE2000 Compatible: 

[   27.859270] io 0x300, irq 3, hw_addr 00:00:b4:4e:19:63

[   34.234511] EXT4-fs (sda2): re-mounted. Opts: (null)

[   36.798572] device-mapper: uevent: version 1.0.3

[   36.803086] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com

[   43.374057] udevd[1244]: starting version 3.2.14

[   44.091244] udevd[1244]: starting eudev-3.2.14

Quote:Xorg.0.log

Code:
[    65.912] 

X.Org X Server 1.21.1.7

X Protocol Version 11, Revision 0

[    65.914] Current Operating System: Linux arpan 5.10.188-antix.1-486-smp #1 SMP Tue Aug 1 00:54:36 EEST 2023 i686

[    65.914] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.188-antix.1-486-smp root=UUID=c415446e-f006-456b-94a9-f03fc1a2865a ro quiet selinux=0 xorg=vesa,1024x768

[    65.915] xorg-server 2:21.1.7-3.0nosystemd4 (https://www.devuan.org/os/community) 

[    65.915] Current version of pixman: 0.42.2

[    65.921]     Before reporting problems, check http://wiki.x.org

    to make sure that you have the latest version.

[    65.921] Markers: (--) probed, (**) from config file, (==) default setting,

    (++) from command line, (!!) notice, (II) informational,

    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    65.924] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 14 14:45:08 2024

[    65.930] (==) Using config directory: "/etc/X11/xorg.conf.d"

[    65.932] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    65.940] (==) No Layout section.  Using the first Screen section.

[    65.940] (==) No screen section available. Using defaults.

[    65.940] (**) |-->Screen "Default Screen Section" (0)

[    65.940] (**) |   |-->Monitor "<default monitor>"

[    65.943] (==) No monitor specified for screen "Default Screen Section".

    Using a default monitor configuration.

[    65.944] (==) Automatically adding devices

[    65.944] (==) Automatically enabling devices

[    65.944] (==) Automatically adding GPU devices

[    65.944] (==) Automatically binding GPU devices

[    65.945] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    65.945] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    65.945]     Entry deleted from font path.

[    65.945] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.

[    65.945]     Entry deleted from font path.

[    65.950] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.

[    65.950]     Entry deleted from font path.

[    65.950] (==) FontPath set to:

    /usr/share/fonts/X11/misc,

    /usr/share/fonts/X11/100dpi/:unscaled,

    /usr/share/fonts/X11/Type1,

    /usr/share/fonts/X11/100dpi,

    built-ins

[    65.950] (==) ModulePath set to "/usr/lib/xorg/modules"

[    65.950] (II) The server relies on udev to provide the list of input devices.

    If no devices become available, reconfigure udev or disable AutoAddDevices.

[    65.951] (II) Loader magic: 0x769780

[    65.951] (II) Module ABI versions:

[    65.951]     X.Org ANSI C Emulation: 0.4

[    65.951]     X.Org Video Driver: 25.2

[    65.951]     X.Org XInput driver : 24.4

[    65.951]     X.Org Server Extension : 10.0

[    65.952] (--) using VT number 7

[    65.952] (II) seat-libseat: libseat integration requires -keeptty and -keeptty was not provided, disabling libseat integration

[    65.998] (--) PCI:*(0@0:2:0) 126f:0910:126f:0910 rev 181, Mem @ 0xfd000000/16777216, BIOS @ 0x????????/131072

[    65.999] (II) LoadModule: "glx"

[    66.001] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    66.032] (II) Module glx: vendor="X.Org Foundation"

[    66.032]     compiled for 1.21.1.7, module version = 1.0.0

[    66.032]     ABI class: X.Org Server Extension, version 10.0

[    66.033] (==) Matched siliconmotion as autoconfigured driver 0

[    66.033] (==) Matched modesetting as autoconfigured driver 1

[    66.033] (==) Matched fbdev as autoconfigured driver 2

[    66.033] (==) Matched vesa as autoconfigured driver 3

[    66.034] (==) Assigned the driver to the xf86ConfigLayout

[    66.034] (II) LoadModule: "siliconmotion"

[    66.037] (II) Loading /usr/lib/xorg/modules/drivers/siliconmotion_drv.so

[    66.039] (II) Module siliconmotion: vendor="X.Org Foundation"

[    66.039]     compiled for 1.21.1.4, module version = 1.7.9

[    66.040]     Module class: X.Org Video Driver

[    66.040]     ABI class: X.Org Video Driver, version 25.2

[    66.040] (II) LoadModule: "modesetting"

[    66.047] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    66.049] (II) Module modesetting: vendor="X.Org Foundation"

[    66.049]     compiled for 1.21.1.7, module version = 1.21.1

[    66.049]     Module class: X.Org Video Driver

[    66.050]     ABI class: X.Org Video Driver, version 25.2

[    66.050] (II) LoadModule: "fbdev"

[    66.057] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    66.058] (II) Module fbdev: vendor="X.Org Foundation"

[    66.058]     compiled for 1.21.1.3, module version = 0.5.0

[    66.059]     Module class: X.Org Video Driver

[    66.059]     ABI class: X.Org Video Driver, version 25.2

[    66.059] (II) LoadModule: "vesa"

[    66.066] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    66.068] (II) Module vesa: vendor="X.Org Foundation"

[    66.068]     compiled for 1.21.1.3, module version = 2.5.0

[    66.068]     Module class: X.Org Video Driver

[    66.068]     ABI class: X.Org Video Driver, version 25.2

[    66.069] (II) SMI: driver (version 1.7.9) for Silicon Motion Lynx chipsets: Lynx,

    LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC

[    66.070] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    66.071] (II) FBDEV: driver for framebuffer: fbdev

[    66.071] (II) VESA: driver for VESA chipsets: vesa

[    66.077] (WW) Falling back to old probe method for siliconmotion

[    66.077] (--) Assigning device section with no busID to primary device

[    66.077] (--) Chipset Lynx found

[    66.083] (WW) Falling back to old probe method for modesetting

[    66.083] (EE) open /dev/dri/card0: No such file or directory

[    66.083] (WW) Falling back to old probe method for fbdev

[    66.084] (II) Loading sub module "fbdevhw"

[    66.084] (II) LoadModule: "fbdevhw"

[    66.085] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    66.091] (II) Module fbdevhw: vendor="X.Org Foundation"

[    66.091]     compiled for 1.21.1.7, module version = 0.0.2

[    66.091]     ABI class: X.Org Video Driver, version 25.2

[    66.092] (EE) open /dev/fb0: No such file or directory

[    66.093] (II) Loading sub module "vgahw"

[    66.093] (II) LoadModule: "vgahw"

[    66.096] (II) Loading /usr/lib/xorg/modules/libvgahw.so

[    66.097] (II) Module vgahw: vendor="X.Org Foundation"

[    66.097]     compiled for 1.21.1.7, module version = 0.1.0

[    66.098]     ABI class: X.Org Video Driver, version 25.2

[    66.098] (II) SMI(0): Creating default Display subsection in Screen section

    "Default Screen Section" for depth/fbbpp 24/32

[    66.098] (==) SMI(0): Depth 24, (--) framebuffer bpp 32

[    66.104] (==) SMI(0): RGB weight 888

[    66.104] (==) SMI(0): Default visual is TrueColor

[    66.104] (==) SMI(0): PCI Burst enabled

[    66.104] (==) SMI(0): PCI Retry enabled

[    66.105] (==) SMI(0): Using Hardware Cursor

[    66.105] (II) Loading sub module "int10"

[    66.105] (II) LoadModule: "int10"

[    66.106] (II) Loading /usr/lib/xorg/modules/libint10.so

[    66.109] (II) Module int10: vendor="X.Org Foundation"

[    66.109]     compiled for 1.21.1.7, module version = 1.0.0

[    66.109]     ABI class: X.Org Video Driver, version 25.2

[    66.127] (II) SMI(0): Primary V_BIOS segment is: 0xc000

[    66.133] (II) Loading sub module "vbe"

[    66.133] (II) LoadModule: "vbe"

[    66.135] (II) Loading /usr/lib/xorg/modules/libint10.so

[    66.135] (II) Module int10: vendor="X.Org Foundation"

[    66.135]     compiled for 1.21.1.7, module version = 1.0.0

[    66.135]     ABI class: X.Org Video Driver, version 25.2

[    66.136] (II) SMI(0): VESA BIOS detected

[    66.136] (II) SMI(0): VESA VBE Version 0.0

[    66.137] (II) SMI(0): VESA VBE Total Mem: 4096 kB

[    66.137] (II) SMI(0): VESA VBE OEM: Sÿ

[    66.137] (--) SMI(0): Chipset: "Lynx"

[    66.137] (==) SMI(0): Dual head disabled

[    66.137] (==) SMI(0): Using XAA acceleration architecture

[    66.138] (--) SMI(0): videoram: 4096kB

[    66.145] (II) SMI(0): Cursor Offset: 003FFC00

[    66.145] (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0

[    66.146] (II) SMI(0): Reserved: 003FF800

[    66.146] (II) SMI(0): TFT Panel Size = 1024x768

[    66.146] (II) Loading sub module "i2c"

[    66.148] (II) LoadModule: "i2c"

[    66.148] (II) Module "i2c" already built-in

[    66.148] (II) SMI(0): I2C bus "I2C bus" initialized.

[    66.149] (II) Loading sub module "ddc"

[    66.149] (II) LoadModule: "ddc"

[    66.149] (II) Module "ddc" already built-in

[    66.149] (==) SMI(0): Using gamma correction (1.0, 1.0, 1.0)

[    66.149] (II) SMI(0): MCLK = 80.182

[    66.150] (II) SMI(0): Output LVDS has no monitor section

[    66.150] (II) SMI(0): Printing probed modes for output LVDS

[    66.150] (II) SMI(0): Modeline "(null)"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)

[    66.150] (II) SMI(0): Output LVDS connected

[    66.151] (II) SMI(0): Using exact sizes for initial modes

[    66.151] (II) SMI(0): Output LVDS using initial mode (null) +0+0

[    66.151] (EE) SMI(0): Not enough video memory for the configured screen size (1024x1024) and color depth.

[    66.158] (II) UnloadModule: "siliconmotion"

[    66.158] (II) UnloadSubModule: "int10"

[    66.159] (II) Unloading int10

[    66.159] (II) UnloadSubModule: "int10"

[    66.159] (II) Unloading int10

[    66.160] (II) UnloadSubModule: "vgahw"

[    66.160] (II) Unloading vgahw

[    66.160] (EE) Screen(s) found, but none have a usable configuration.

[    66.160] (EE) 

Fatal server error:

[    66.161] (EE) no screens found(EE) 

[    66.161] (EE) 

Please consult the The X.Org Foundation support 

     at http://wiki.x.org

 for help. 

[    66.162] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.

[    66.162] (EE) 

[    66.177] (EE) Server terminated with error (1). Closing log file.

Quote:lsmod

Code:
Module                  Size  Used by

dm_crypt               36864  0

dm_mod                 98304  1 dm_crypt

pcmciamtd              16384  0

chipreg                16384  1 pcmciamtd

mtd                    53248  1 pcmciamtd

pcnet_cs               36864  1

8390                   20480  1 pcnet_cs

pata_pcmcia            20480  0

ppdev                  20480  0

evdev                  20480  0

input_leds             16384  0

joydev                 20480  0

serio_raw              16384  0

pcmcia                 36864  3 pcmciamtd,pcnet_cs,pata_pcmcia

parport_pc             32768  0

parport                36864  2 parport_pc,ppdev

yenta_socket           24576  0

ac                     16384  0

pcmcia_rsrc            20480  1 yenta_socket

tiny_power_button      16384  0

pcmcia_core            20480  3 yenta_socket,pcmcia,pcmcia_rsrc

button                 16384  0

btrfs                1204224  0

blake2b_generic        36864  0

xor                    28672  1 btrfs

raid6_pq              106496  1 btrfs

libcrc32c              16384  1 btrfs

psmouse               118784  0

i2c_piix4              20480  0

uhci_hcd               28672  0

fan                    16384  0

thermal                20480  0

battery                20480  0

rtc_cmos               20480  1

floppy                 61440  0

And last but not least: I was so worried about X that didn't realize that the swap partition was not active nor listed in /etc/fstab.
Maybe this is the reason:

fdisk -l

Code:
Disk /dev/ram0: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram1: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram2: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram3: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram4: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram5: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram6: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram7: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram8: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram9: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram10: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram11: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram12: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram13: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram14: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/ram15: 16 MiB, 16777216 bytes, 32768 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk /dev/sda: 18.63 GiB, 20003880960 bytes, 39070080 sectors

Disk model: HITACHI_DK23DA-2

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disklabel type: dos

Disk identifier: 0x91d891d8

Device     Boot    Start      End  Sectors   Size Id Type

/dev/sda1  *          63 14333759 14333697   6.8G  b W95 FAT32

/dev/sda2       14333760 28874559 14540800   6.9G 83 Linux

/dev/sda3       28874752 29695679   820928 400.8M  5 Extended

/dev/sda4       29695680 39070079  9374400   4.5G  c W95 FAT32 (LBA)

/dev/sda5       28876800 29695679   818880 399.8M 82 Linux swap / Solaris

Partition table entries are not in disk order.

The positions of sda4 and sda5 should be inverted, since the swap partition is inside the extended sda3.
How to fix it? Thanks again.

Yan · 05-14-2024, 06:59 PM

(05-14-2024, 05:33 PM)x18 Wrote:
Code:
[ 66.151] (EE) SMI(0): Not enough video memory for the configured screen size (1024x1024) and color depth.

This is the problem, I think. Run xrandr and choose as low a resolution as possible. Then run xrandr --mode 800x600 (for example) to set it.

It doesn't matter that the partitions aren't in order. It doesn't make much sense to have an extended partition with only one logical partition in it, but it's not a problem.

grindstone · 05-14-2024, 07:41 PM

OK thank you for hanging in there and doing all that. Give us a bit to look this all over.

In the meantime, if you have not activated the swap (not sure why that didn't happen during inst?), for now you can add the line for it in fstab if it's not already in there.

lsblk --fs

will give you the UUID number for your /dev/sda5. Then make sure you have a line for it:

Code:
UUID=theoneyougotwithlsblk none            swap    sw              0       0

in /etc/fstab. Save that so its active at bootup going forward, then try to turn it on

swapon -a

and check with

free -m or df -h etc to make sure it's on/right. Not sure how you got that far w/o it being detected or got a module built w/o it, but...tip of the hat Smile

While I'm here, does it even have the card0 file in there?

ls -l /dev/dri

Thanks again for the patience and tip of the hat on the dogged-pursuit. You are helping to shake-out things and teh testing helps.

x18 · 05-14-2024, 08:39 PM

Many thanks to both of you for being helpful.

(05-14-2024, 06:59 PM)Yan Wrote:
(05-14-2024, 05:33 PM)x18 Wrote:
Code:
[ 66.151] (EE) SMI(0): Not enough video memory for the configured screen size (1024x1024) and color depth.

This is the problem, I think. Run xrandr and choose as low a resolution as possible. Then run xrandr --mode 800x600 (for example) to set it.

It doesn't matter that the partitions aren't in order. It doesn't make much sense to have an extended partition with only one logical partition in it, but it's not a problem.

I wonder where does that 1024x1024 come from. It's the resolution of a tile, isn't it?

Is it possible to run xrander without X working? It gives me "can't open display". And export DISPLAY=:0 doesn't work.

My extended partition had six partitions inside. I had to delete them along with the primary /boot in order to install DSL.
That's because it seems it's not possible to install DSL on a multi-partitioned disk via command line (cli-installer): no space left on device. [ please-please-please put it as a first entry in your to-do list].
On my disk there are also two existing primary NTFS partitions for Win2000, so I had the only choice to make another primary for DSL and put the swap into the extended.

/dev/dri/card0 has never been created so far.

Yan · 05-14-2024, 09:21 PM

Oops, xrandr can't run in text mode. Try replacing "3" with "video=800x600".

Does lspci -v tell you how much graphics memory you have? At what resolution did you run Windows 2000?

I suspect you can create a /boot partition in text mode if you create it manually with fdisk and mount it. I know that some people want a separate /boot partition; I never saw the point.

grindstone · 05-15-2024, 12:40 AM

The X prober looks like it had trouble configuring on this one--as Yan said, the bit depth is too high. If we just do the math, 800x600 x 8bit fits in 4MB of VRAM, but not 1024x768.

But even if we set a reasonable Screen section in the xorg.conf, say, by changing

DefaultColorDepth 16

to 8 etc, there's still the bit about why udev (I think?) didn't create card0...and I don't know enough Debian yet to answer that question (I'm new here, too).

Question: When everything dies, are you user demo or user root? Reason is that Xorg -configure man page states to use actual root (uid 0). Maybe being actual root produces a different result? If you were demo, maybe do a real switch to root and run the config if you were not uid 0 before.

Soooo, yes, the panel itself is 1024x768 but at 4MB, that only fits 4-bit and the Lynx video might not support that from the looks of it. I'm still searching.

What happens if you su - to root and run your configure but with an extra depth argument?

Xorg -configure -depth 8

Did you pull-down the man pages and that stuff so you can at least review that? Thanks for hanging in there and working on it. Seems close Smile

x18 · (This post was last modified: 05-15-2024, 01:15 PM by x18.)

lsblk --fs:
Swap solved meanwhile, but not solved this one that shows at boot:

Code:
blk_update_request: I/O error, dev fd0

"video=800x600": no way, it loops, have to reboot.

lspci -v

Code:
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 03)

    Flags: bus master, medium devsel, latency 64

    Memory at f8000000 (32-bit, prefetchable) [size=64M]

00:02.0 VGA compatible controller: Silicon Motion, Inc. SM910 (rev b5) (prog-if 00 [VGA controller])

    Subsystem: Silicon Motion, Inc. SM910

    Flags: medium devsel, IRQ 9

    Memory at fd000000 (32-bit, non-prefetchable) [size=16M]

    Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]

00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)

    Flags: bus master, medium devsel, latency 0

00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering])

    Flags: bus master, medium devsel, latency 64

    I/O ports at 01f0 [size=8]

    I/O ports at 03f4

    I/O ports at 0170 [size=8]

    I/O ports at 0374

    I/O ports at fcf0 [size=16]

    Kernel driver in use: ata_piix

00:07.2 USB controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])

    Flags: bus master, medium devsel, latency 64, IRQ 11

    I/O ports at fcc0 [size=32]

    Kernel driver in use: uhci_hcd

    Kernel modules: uhci_hcd

00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)

    Flags: medium devsel, IRQ 9

    Kernel modules: i2c_piix4

00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 02)

    Flags: bus master, medium devsel, latency 168, IRQ 9

    Memory at 0c000000 (32-bit, non-prefetchable) [size=4K]

    Bus: primary=00, secondary=01, subordinate=04, sec-latency=176

    Memory window 0: 10000000-13ffffff (prefetchable)

    Memory window 1: 14000000-17ffffff

    I/O window 0: 00001000-000010ff

    I/O window 1: 00001400-000014ff

    16-bit legacy interface ports at 0001

    Capabilities: [dc] Power Management version 1

    Kernel driver in use: yenta_cardbus

    Kernel modules: yenta_socket

00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 02)

    Flags: bus master, medium devsel, latency 168, IRQ 9

    Memory at 18000000 (32-bit, non-prefetchable) [size=4K]

    Bus: primary=00, secondary=05, subordinate=08, sec-latency=176

    Memory window 0: 1c000000-1fffffff (prefetchable)

    Memory window 1: 20000000-23ffffff

    I/O window 0: 00001800-000018ff

    I/O window 1: 00001c00-00001cff

    16-bit legacy interface ports at 0001

    Capabilities: [dc] Power Management version 1

    Kernel driver in use: yenta_cardbus

    Kernel modules: yenta_socket

Windows info, Silicon Motion Lynx driver:

Code:
Chip type: Lynx

DAC type: integrated RAMDAC

Memory size: 4 MB

Monitor type: flat digital screen (1024x768)

Monitor frequency: 75 Hz (current setting) or 60 Hz

Colors: currently set on 16 bit, but can do 24 bit at the same resolution

Quote:I suspect you can create a /boot partition in text mode if you create it manually with fdisk and mount it.

I did it, but then the installation failed because of no space left on device.
It seems to me the installer only consider one partition (else why didn't it used the other ones?).
Or, if a bigger partition size in needed, it should be stated or warned.

Quote:I know that some people want a separate /boot partition; I never saw the point.

We are talking about VERY old hardware, belonging to an era when the BIOS was limited.

How to use a 20 Gb hd if the BIOS recognizes up to 10 Gb only (this is the case of my laptop)?
Splitting it into partitions.

How to put and boot two OSs on the same disk if they occupy more room than the detected one?
Keeping the bootable part of the OSs within the 1024th cylinder (roughly about 1/3 of the disk capacity).
That's because Windows can't boot if put at the end of the disk and at that time it used only one partition.
Nowadays the modern versions of Windows have a boot partition as well (they have "linuxed" it).

Quote:When everything dies, are you user demo or user root? Maybe being actual root produces a different result? What happens if you su - to root and run your configure but with an extra depth argument?

I often run as root. No, same errors.

Quote:there's still the bit about why udev (I think?) didn't create card0...and I don't know enough Debian yet to answer that question

This is the very crucial point and if you googled it you realize that it's not a Debian problem, it's a universal problem.
So far I've been unable to find a solution and hope that you gurus can.
Please take your time. Thank you.

Yan · (This post was last modified: 05-15-2024, 09:03 PM by Yan.)

When you say that with video="800x600", it "loops", what exactly do you mean? Is it an improvement over the previous situation?

Apparently your Silicon Motion GPU has 16 MB of memory.

fd0 is the floppy drive. Do you know whether it's supposed to work? Does it matter if it doesn't?

Edit: try Xorg -configure again. Is the error about "Not enough video memory" still there?

x18 · (This post was last modified: 05-16-2024, 08:52 AM by x18.)

(05-15-2024, 05:27 PM)Yan Wrote: When you say that with video="800x600", it "loops", what exactly do you mean? Is it an improvement over the previous situation?

It loads Xorg again and again without succeding.

Quote:Apparently your Silicon Motion GPU has 16 MB of memory.

I wonder which is the correct data. Windows says 4.
And that could be the point: does it works on 4 and not on 16?

Quote:fd0 is the floppy drive. Do you know whether it's supposed to work? Does it matter if it doesn't?

It works great on Windows and using some boot floppy disks, including linux mini-distros.
It would be logic to get it working on any OS.
It is important on old hardware, especially for managing BIOS.

dmesg

Code:
[   11.011638] floppy: module verification failed: signature and/or required key missing - tainting kernel

Quote:Edit: try Xorg -configure again. Is the error about "Not enough video memory" still there?

Not yet, just "open /dev/dri/card0: No such file or directory"

grindstone · (This post was last modified: 05-16-2024, 02:36 PM by grindstone.)

Yeah, lspci sees 16M, X sees 4M. The guys 20-yr old XF86 config used vesa and fbdev and worked...they don't 20-some years later (my knees used to work 20 years ago, too). If we get lucky elsewhere, we can probably still steal that modeline later.

If we just listen to what X is telling us:

Code:
[    65.950] (II) The server relies on udev to provide the list of input devices.

    If no devices become available, reconfigure udev or disable AutoAddDevices.

Reinstall udev (eudev) and see if we can get the devices populated w/o trying by hand

sudo apt-get install --reinstall udev

And the second bit is to add this line:

Code:
Option "AutoAddDevices" "False"

inside the ServerFlags section at the top of /etc/X11/xorg.conf.in (presumably only if the udev thing worked to create card0 and if the error still persists, otherwise this may be counter-productive)

Boot, see what happens and let us know.

Login
Username:
Password:	Lost Password?
	Remember me